1 / 33

Raven CFD – Agenda (March 10-11 th 2004)

Raven CFD – Agenda (March 10-11 th 2004). March 10 th , 2004 10:00 Welcome / Introduction 10:30 Raven CFD Overview 11:00 Inset Body Approach 11:30 Raven Domain Refinement 12:00 Lunch 12:30 MSDACS Status Report 13:00 Open Discussion March 11 th , 2004 09:00 Raven Training

kaylana
Download Presentation

Raven CFD – Agenda (March 10-11 th 2004)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Raven CFD – Agenda (March 10-11th 2004) March 10th, 2004 • 10:00 Welcome / Introduction • 10:30 Raven CFD Overview • 11:00 Inset Body Approach • 11:30 Raven Domain Refinement • 12:00 Lunch • 12:30 MSDACS Status Report • 13:00 Open Discussion March 11th, 2004 • 09:00 Raven Training • 09:30 General Description • 09:45 Overview of Tools • 10:15 Suggested Approaches (Re: MSDACS) • 10:45 Job Deck / Raven Inputs • 11:15 Boundary Conditions • 11:45 Directory Structure / Outputs • 12:15 Post-Processing • 12:30 Lunch • 13:30 Review / Open Discussion

  2. Outline • Aletheon Technologies • Capabilities • Example Analysis • Raven Flow Solver • General Overview • Development in Support of SDACS Program • Future Developments • Inset Body • Raven Domain Refinement • Inset Bodies • A Review of Standard CFD Techniques • Inset Body • Examples • Overview (Benefits/Limitations) • Applications • Raven Domain Refinement • An Overview of Grid Adaption • Raven Domain Refinement • Methodology • Use w/ Inset Bodies • Flowfield Feature Resolution

  3. Computational Capabilities • Super-Computer • 210 processors • 105 Rack-mounted nodes • 140 Gigabytes RAM • 2.4 Terrabyte RAID Storage System • High-speed backbone switch • SGI Workstations • 64-Bit Workstations • Graphics Processing • Pre-Processing • Class “A” CAD Generation • Large-Scale Comp. Analysis • 15,000,000 –45,000,000 elements • ~100 Full-scale calculations annually

  4. Raven CFD

  5. Raven CFD • Internally Developed (2001) to Fill Gap w/ Existing Commercial Flow Solvers • Commercially Available July 2003 • Unstructured Arbitrary Element Flow Solver • General Polyhedral Elements (Prism for Accurate BL Resolution) • Parallel Implementation • Superlinear Performance (demonstrated on thousands of procs.) • Optimized for Linux clusters (also works on SGI, HP, Sun, Cray, etc.). • Low communication overhead (Fast-Ethernet Sufficient). • Unconditionally stable. • Able to run CFL of 1 million. • Problems started with CFL of nearly 1 million. • Temporal damping used to start “difficult” problems, or high time step. • Solution updates restricted to allow startup transients. • Time accurate. • Uses global time step for all calculations (including valves). • Implicit algorithm used for time step advancement. • Cell centered, finite volume. • Dependent variables stored at cell centers. • Faced based processing (no elements formed).

  6. Raven CFD • Euler/RANS Equations • Spalart-Allmaras and k-w turbulence models • DES available to solve large regions of separations • Implicit integration scheme. • Gauss-Seidel sweeps used for implicit algorithm. • Newton sub-iterations to recover accuracy. • Second order accurate (Runge-Kutta required for higher order). • Higher order fluxes. • Approximate Reimann scheme of Collela. • Least squares used to form higher order flux interfaces. • Limiter used to prevent oscillations (TVD).

  7. Raven CFD • Cost effective option for solution of large scale problems. • Developed to be massively parallel to solve large scale problems. • Significantly less expensive than other solutions (Fluent, Star-CD, etc.). • Designed to accurately solve “real world” problems. • Specialized design for solution of specific problems. • Not designed to solve all fluid problems. • No support for multi-phase, reacting flows, etc. • Specialized design enhances performance and reduces cost. • Provides higher fidelity at a lower cost. • V1.4 Release March 2004. • V1.5 Scheduled for Mid 2004 • Inset Body Method • Raven Domain Refinement (RDR)

  8. Raven CFD – Development (In Support of SDACS) • Algorithm Enhancements • Wall-heat transfer • Lift/Drag Calculation • Improved Convergence Rates • Increased Stability • Immersed Boundaries • Blocked / Flow-through (switching w/out re-gridding) • Eliminated Wall-distance Calculation • 4-8 hours  10 seconds • Reduced Restart File Size ; Improved I/O Performance • Split Flow Visualization Data • Rapid transient Analysis Post-Processing • Usability Enhancements • External Tool Development • RSplit, RMap, RPFix, HexGrid, FVToDomain, STLToRaven, etc… • Solution Analysis Tool (Transient Histories, Convergence History, Performance, etc…) • Parametric Analysis Tool • Multiple Run Comparison (50-concurrent solutions) • Component Based Comparisons • Details to be provided in Training Class

  9. CFD Overview – CAD Geometry • Simplify Geometry (fill holes, join surfaces, remove features) • Water-tight Surfaces • Trim all surfaces (wheel to road, control arms to wheel) • Export to Grid Generation Package

  10. CFD Overview – Surface Grid • Generate Body-Fitted Grid (BC’s) • 100,000 Surface Tris • Element Impingement (Wheel/Road BC) • Similar Difficulties MSDACS Ball Seats

  11. CFD Overview – Volume Grid • Generate Volume Mesh • Fixed Body / Rotating Body • BC ??? (Solid Disk)

  12. CFD Overview – Boundary Layer • Viscous Layer Generation • 18 Layers x 100,000 surface tris • 1,800,000 per wheel (x4) • 0.0001” from Surface • Timestep/Convergence Issues • Fixed Geometry (No True Rotation) • Rotation Applied Through BC • No Camber/Toe/Turning w/ Re-gridding • No Suspension Changes w/out Re-gridding • Excessive Cell Count

  13. Inset Body – Propeller Demo

  14. Inset Body – Wheel Demo • Transient Movement • Rotation/Translation • Fixed & Dynamic • Direct CAD Insertion • No Geometric Simplifications • No CAD Cleanup Required • No Watertight requirement • Accurate Inviscid Results • Imposed Turbulent Profile • 10% of 10% ~ 1% • 10% of 10% (of 10%)

  15. Inset Body – Methodology – Standard CFD • Standard CFD Approach (Body Fitted) • Benefits • Accuracy • Near-wall region resolution • Viscous Effects • Surface Heat Flux • Deficiencies • CAD requirements • Timing for body-fitted grid generation • Cell counts for viscous resolution • Post-processing • Convergence Rate < due to viscous layer resolution (Relative Measure) • Geometric Simplification Needed

  16. Inset Body – Methodology – GLS Approach • Fully Inset or GLS Approach • Benefits • CAD to CFD in minutes • Rapid Convergence • Minimal CAD Effort • No CAD cleanup, surface trimming, stitching; No Water-tight requirement • Geometric Protrusion Allowed; No Gometric Simplifications • Fully Automated • Analyst Independence ; Automated Feature Resolution • No A-Priori Limitations • Simplified Post-Processing • Purely Hex Mesh (conformal/non-conformal) • Design Tool • Rapid Geometry Change; No Grid Requirements; Self-Automated • DOE Studies (Thousands of Cases) • Full-Matrix Mapping • Design/Trend-Analysis Tool • Limitations • Less accurate near-wall region??? • Separated Region Locations/Extent??? • Surface Heating??? • Assuming Standard Approach Resolved Near Wall Region Appropriately • Rarely achieved for realistic engineering problems • Otherwise, possibly just as accurate, possibly more accurate (extensive testing required)

  17. Inset Body –Applications • MSDACS • Fixed Ball, Multiple Positions (no re-gridding) • Shutoff valves • Offseat leakage parametric studies ; Single Grid • Moving Components (Ball/Flapper Valve) • MTA Manufacturing Defects (Inertial Separator/Throat Diameters) • Sensitivity Analysis • Rapid (No Re-Gridding) • Limited by Computational Resources; Not Human-Resources • Numerous Defects Structures Examined • Independent / In-Parallel • Eliminate Grid Sensitivity • Store Separation • Rotating Propulsion Devices • Propellers • Helicopter Blades • Internal Engine Simulations • Valves • Cylinder Heads • Deforming Bodies • Large Particulate Tracking

  18. Inset Body – Applications • Multi-body simulations (Mixed or GLS) • Vehicle Drafting Studies • Multi-car simulations • Dynamic movement • Wake Interaction Studies • Fixed or dynamic (transient) • Vehicle Ride-Height Mapping • Full-matrix map • Vertical Launch Systems • Wheel Steer/Camber/Toe-In • Rapid CAD to CFD Capability • Surface Deformations • Optimization Studies / Parametric Techniques • No re-gridding Required • No Grid Movement Required • No Cell Quality Degradation; Element Crossover; Numerical Instabilities; • Rapid Solution Analysis/Convergence

  19. Grid Adaption Overview • Fixed Domain Approaches • A-Priori Grid Generation Required • Difficult to Optimize Cell Placement • Curved Shocks, Vortex Locations, Shear Layer Boundaries, Blunt Body Wakes, Wing Upwash Angles, etc… • Result • Excessive cell counts around primary flow features • Under-resolved regions of flowfield • Parametric Studies Very Difficult w/ Single Grid • Grid Resolution Studies • Required for nearly all problems • Rarely implemented in practice • Difficult, Time-consuming, Typically Neglected • Common Grid Adaption Approaches • Increase cell count around “weighting function” • Difficult determination of appropriate wf • Pressure, Entropy, Vorticity, Density, Mixed Functions, …etc • A-priori knowledge of flowfield required • CFD / Grid Adaption Specialist • Multiple Analyst / Multiple Results • Knobs/Knobs/Knobs • Inefficient for Extremely Large Problems • Serial or Parallel Inefficiencies • Non-integrated approach (start/stop solution) • Time Accuracy • Integrated Approach w/ grid speed terms, implicit formulation, and Efficient/Accurate Interpolation • Difficult to maintain conservation and accuracy

  20. Raven Domain Refinement • Raven Methodology • Unified / Generally Applicable Approach • Minimal Inputs • Final Cell Count, Minimum Cell Size, Start/Stop Iteration Counts • No Knobs (No wf specification) • Analyst Independence (Goal) • Multiple Users / Single Result • Grid Resolution Studies • Can be fully Automated • Easily Integrated into all calculations • Results Automatically Highlight Grid Dependent Results • Combined Approach • Utilizes H/P/R Refinement Techniques • Practical versus Academic Implementation • Fully Integrated, Easy of Use, Generally Applicable, Improves Analyst Independence • Inset Bodies • Automatically Refines Volume Mesh After Inset Body Insertion • Coarsening Under Development • Movement Clusters to Inset Body Surface (Minimize Cell Counts) • Follows Inset Body • Translation/Rotation • Single Starting Grid / Multiple Parametric Studies • Minimal Inputs • Characteristic Cell Size on Surface of Inset Body • No A-Priori Knowledge (i.e. refinement) of Insertion Points Required • Simplified Geometric Resolution • No Geometric Accuracy/Interface with NURBS/Surface Smoothing/Thin-baffle cross-over, etc… problems • Flowfield Feature Resolution • Subsonic, Transonic, Supersonic • Shocks, Vortices, Shear Layers

  21. Raven Domain H/P-Refinement

  22. Raven Domain H/P-Refinement

  23. Inset Body R-Refinement

  24. Inset Body – Minimize Internal Pt. Count

  25. Flowfield R/H/P Refinement

  26. Flowfield R/H/P Refinement

  27. Flowfield R/H/P Refinement

  28. Flowfield R/H/P Refinement

  29. Unified Solution Approach

  30. State of Development • PDE Modifications • N-S recast for Inset Body Approach • Updated Momentum Equations • Updated Implicit Terms • Transient Insertion of Geometry • Mixed Standard/Inset Approach • Pre-Defined User-Specified Motion • Translation/Rotation (Static + Dynamic) • Pressure Forces Interpolated To Inset Surface • Direct CAD Insertion (STL data format) • GLS Approach • Base model completed • Feature Resolution In Progress (Geometry + Flowfield) • Post-processing Development Nearing Completion • Raven Domain Feature Detection/Resolution • Inset Body (Refinement/Clustering) • Flowfield Features (shocks, vortices, separated regions, etc…) • Generalized Approach • Minimal Inputs • Unified Method • Subsonic, transonic, supersonic, Inset Body • “Analyst Independence” • Time-Accurate Grid Resolution • Inset Body w/ Movement (Propeller) • Grid Coarsening • Error Bounding Studies Underway

  31. Ongoing Development Efforts • Higher-Order Interpolation Schemes • Improved Accuracy for Inset Forces • Extend to Energy Equation • Body heating on Inset Bodies • Inset Movement Capabilities • Compound Motion • Rotation + Translation Combined • 6-DOF Model Development • Surface Deflections • GLS Approach • Fully-Automated Design Studies • Surface Deformations • NURB Mapping • Control Point Movement • User controlled or fully automated • Optimization Techniques • Fully Transient Grid Resolution • Grid Speed Terms • Re-Cast NS • Temporal Sub-Iterations • Non-Equilibrium Air • Transition (Inset + Raven Domain Refinement) from Pre-release to Production Tool • Expand Scope Testing • Documentation • Error bounding studies

  32. Conclusions • Research Phase Concluded • Efficacy/Feasibility of Methodology Proven • Generalized Development Underway • Widely Applicable Approach • Problem Scope Expanded • Reduced Analyst Time • Improved Accuracy (RDR) • 1-step Closer to Analyst Independence • Applicable to a wide range of DoD Related Problems • Funding Driven Development Efforts • Development Efforts Primarily Automotive Driven To Date • Continue Development for DoD Problems • Transition To General Release Status • Expansion of Capabilities • Funding Required for Next Phase of Development (BAA, SBIR, etc…)

More Related