ÚMZ
This presentation is the property of its rightful owner.
Sponsored Links
1 / 25

Institute of Metrology and Quality Assurance Testing PowerPoint PPT Presentation


  • 85 Views
  • Uploaded on
  • Presentation posted in: General

ÚMZ. Institute of Metrology and Quality Assurance Testing. Technická 2896/2 616 69 Brno Czech Republic tel: +420 541 14 2411 fax: +420 541 14 2104 e-mail: vladimir.pata @ seznam.cz web: www.umz.fme.vutbr.cz. Made by doc.Dr.Ing.Vladimír Pata

Download Presentation

Institute of Metrology and Quality Assurance Testing

An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -

Presentation Transcript


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

Technická 2896/2

616 69 Brno

Czech Republic

tel: +420 541 14 2411

fax: +420 541 14 2104

e-mail: [email protected]

web: www.umz.fme.vutbr.cz

Made by doc.Dr.Ing.Vladimír Pata

Secretaryof Institute of Metrology and Quality Assurance Testing


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

  • Introduction of institute and its department’s classification

  • Presentation of environment for teaching and research

  • Crucial teaching procuring by Institute of metrology and quality assurance testing internally and for other Institute of Faculty of mechanical engineering

  • Short introduction of study’s field

  • Detailed description of science and research realized by Institute of metrology and quality assurance testing

  • Introduction of the most important projects resolved by Institute of metrology and quality assurance testing

  • Well-arranged demonstration of selected projects resolved in Institute of metrology and quality assurance testing (included cooperation with other Institutes of Faculty of mechanical engineering)

  • Partnership cooperation of Institute of metrology and quality assurance testing and created contacts

  • Ideas and suggestions for future development of Institute of metrology and quality assurance testing

Warp of presentation

Symbols for presentation operating

Previous page( PgUp)

Following page (PgDn)

Passage to Info-page


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

Stall of Institute

  • Branch of Quality management

    &

  • Branch of Metrology and engineering inspection

Labs

  • Teaching laboratory of practical metrology

  • Laboratory of special and laser metrology

  • „Floating laboratory"

  • Laboratory of scaning high speed process (in realization)

  • Multimedia computerized classroom


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

Workers

  • Professor2

  • Senior lecturer5

  • Assistant professor / assistant6

  • Technicall staff4

Students

  • PhD students14

  • Specialization studentscca. 40 in academic year


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

Laboratory of practical metrology

Area for teaching

Support fundamental education metologie longitude, angles and temperature. Further verification cogged wheels, thread, calibre,surface texture and statistical process controll. At metering in education is in maximum measurement realized doctrinal progress , it entails cohesion wireless transmission measured data and picture with appropriate programmatic equipment and data projector.


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

Laboratory of special and laser metrology

Area for teaching and research

Clinching tutorial and research in the area metrology textures surfaces, optical metrology, metrological lengths by the help of laserinterferometru, tangent and contactless scan vibration (realized in conjunction with Institute of automatization and information science)


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

„Floating laboratory equipment by double stage air-conditioning"

Area for teaching and research

Serve for realization research and special tutorial (in terms of doctor's studies and realization diploma work washing) in the area metrology textures surfaces, deviation recontouring and position etc . contactless measuring textures surfaces is realized in conjunction with Institute of physical engineering.)


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

Multimedial computer classroom

Area for teaching

It serves first of all to information of students with modern software as from metrology so from quality management areas. Article of inventory computer schoolroom is mathematic-statistic software (e.g. Minitab) and 3D graphics system SolidWorks.


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

  • Realized in Institute of metrology and quality assurance testing

  • Basic courses Mechanical metrology I and II, Computer’s support of metrology, Quality control, Statistical control of production process, Control of security and risk, Certification and technical normalization, European law in industrial practice

  • Realized by Institute of metrology and quality assurance testing for other Institute of Faculty of mechanical engineering

  • Institute of mathematics engineering, Institute of physics engineering,Institute of Machine and Industrial Design, Institute of Manufacturing Technology, Institute of Production Machines, Systems and Robotics, Institute of Transport Engineering

  • Teaching in field of study in Ph.D. study

  • Possibility of study’s continuation in Ph.D. program “Metrology and quality assurance testing (3920V)“ and obtaining of Ph.D. degree

Crucial teaching

Branches

  • Branch of Quality management

    &

  • Branch of Metrology and engineering inspection


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

Branches

Metrology and Quality assurance

The institute of Metrology and Quality Assurance testing is self-dependent scientific and educational work place.The institute ensures the development of new disciplines in area of metrology. The institute guarantees a high professional standard of bachelors, masters, Ph.D. students and other educational forms study.

Quality management

Quality is degree to which a set of inherent characteristics fulfils customer requirements.

Mission of branch is assertion of philosophy Total quality management also in reliability and safety areas. Branch prepares specialists with new practice requirements developed knowledge. It completes education for specialists from industry. It provides consulting, solving and evaluation of projects for industry companies.


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

  • Evaluation of the Component Surface Texture

  • Evaluation of Shape and Bearing Deviations

  • Evaluation the Residual Stresses in the Surface Layer

  • Application of laser-interferometry for linear and angular measurement and for dynamic data capture and analysis

  • Evaluation of verification processes

  • Scaning high speed process (in realization)

  • Collaboration with conservation centre of TMB

  • Major accident selection in industrial area

  • Systematical hazard identification an operability studies

  • Enviromental risk assessment for underground water

  • Consequences Estimation

  • Certification systems and accreditation condition

  • Acquis communautaire and its application

Science and research


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

  • European social foundation reg. № CZ.04.1.03/3.2.15.2/0291: Courses of further education for methodic-management authorities in quality management systems, environment management systems and occupational health and safety management systems. Assoc. Prof. Tes.

  • GAČR reg.no. 101/02/0770: Evaluation of Deformation Behaviour of the Materials During Cutting and Possibilities of its Utilization for Determination the Dynamic Properties of the Materials, doc.Bumbálek

  • GAČR reg.no.101/02/0802: The Influence of the Cutting Methods on the Residual Stresses in the Surface Layer and their Influence on Fatigue, doc.Bumbálek

  • GAČR reg.no.101/06/0490: Scanning and Surface Texture Analysis of Emerging Materals for Controlled Highly Precise Technological Methods, doc.Bumbálek

The most important resolved projects


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

Realizované konference a symposia ÚMZ, resp.podílení se na jejich přípravě

Doc.Pata

  • National conference „Konferenčního setkání uživatelů systému SolidWorks“, Brno 2000-2004, ČR

  • Scientific commettee of international conguess Loss Prevention and Safety promotion in the Process Industries, Prag 2004

  • Member of scientific commitee of 42nd International Petroleum Conference, Slovnaft VÚRUP, a.s., Bratislava, SR, 2005

  • Member of scientific commetee Reliabiliti in Chemical Industry, Slovnaft VÚRUP, a.s., Bratislava, SR, 2005

  • Tutor of internation symposium TD Diagon, 2004 – 2006, Zlín, Czech Republic

  • Realized professional conferences “Quality and company communication”, Brno, CZ, in years 2000 - 2005

Prof.Babinec

Doc.Fiala


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

Contact Evaluation of the Surface Texture – 2D

www.umz.fme.vutbr.cz/

Demonstration of selected resolvedprojects


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

Non-contact Evaluation of the Surface Texture - 3D

www.umz.fme.vutbr.cz/

Ground surface

Selected examples of solving projects

Buffed surface


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

Evaluation Roundness and Cylinder Deviations

www.umz.fme.vutbr.cz/

Selected examples of solving projects


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

Evaluation the Residual Stresses in the Surface Layer

www.umz.fme.vutbr.cz/

Selected examples of solving projects


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

Verification of micro-parts of keybord of notebook Acer by digital measuring microscope

www.umz.fme.vutbr.cz/

Selected examples of solving projects

Verification part

Pin-heag for comparision of size


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

Selecting key proportions parametres of control sheed of mechanical musical box type Manopan

www.umz.fme.vutbr.cz/

Selected examples of solving projects

The project is solved together with VUT FSI and Technical museum Brno


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

Kinematic 3D model of cylinder musical box Paillard (Switzerland 1887)

www.umz.fme.vutbr.cz/

Selected examples of solving projects

Kinematic 3D model was made for information system of Technical museum Brno on graphical platform SolidWorks


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

Example of scenarios development of unawares matters

www.umz.fme.vutbr.cz/

Selected examples of solving projects

For playback of video-continuity click on videoarea


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

  • Fy Renishaw, s.r.o. Exchanging of skills, excursions,calibrations

  • Fy IMECO, s.r.o.Representative fy Taylor Hobson, Leicester,

    UK – lecturing

  • Český metrologický institut Committee on certification industrialists in metrological area

  • Český normalizační institutExpert´s testimony

  • Technické muzeum v BrněCollaboration in area renovation of technical mechanisms

  • Mesing Brno, spol s.r.o. Procucer of measuring instruments – Expert´s testimony

  • Komutex, spol. s.r.o. Expert´s testimony

  • TÜV CZ s.r.o.Expert´s testimony

  • Institut výchovy bezpečnosti práce Brno

  • Spolupráce s podniky Collaboration with firms (The area of hazard analysis)

    Lovochemi, a.s., Lovosice

    Spolana, a.s., Neratovice

    Slovnaft, a.s., Bratislava

    LZ Draslovka, a.s.,Kolín

    Deza, a.s., Valašké Meziříčí

Partnership cooperation


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

  • Loughborough University of Technology, Loughborough, UK

  • Dublin City University, Dublin, Ireland

  • Universita della technologia,Pisa, Italia

  • Technische Universität Wien, Austria

  • Polytechnika Swietokrzzyska, Institut technologii Maszyn Kielce

  • Slovenská technická universita v Bratislavě, Strojnická fakulta, Slovakia

  • Slovenský metrologický ústav Bratislava, Slovakia

  • MTF STU Trnava Katedra obrábania a montáže, Slovakia

  • TND Netherlands

  • TU Delft, Netherlands

  • VTT Tampere, Finland

Contacts with international partners


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

Interest in Cooperation

  • Especially offer to:

  • Evaluating of metrology lengths, planeness and straightness

  • Verification of deviation recontouring and position

  • Evaluation of Surface Texture

  • Scan of highly fast phenomenon (in realization)

  • Calibration of gauges

  • Statistical inspection

  • I dentification of source diversification and risk rating

  • Simulation aftermath of unforseen event

  • Appreciation enviromentalnich impact of unforseen event

  • Consultancy in the area of prevention weighty breakdowns


Institute of metrology and quality assurance testing

ÚMZ

Institute of Metrology and Quality Assurance Testing

www.umz.fme.vutbr.cz/

  • It will accurately conformable with „Longtime intention of development FSI"

  • Pilot imposition of UMZ is ensure satisfy conditions European social fund reg.No .CZ.04.1.03/3.2.15.2/0291

  • Cavity roundness and cohesion system metrology, quality, credibility gap and safeness not only in scientific, but and practical areas

  • Instantaneous publication of research record in prestigious periodical

  • Laying all the time higher emphasis on independent creative activity

    student and repair of meaning for computational training and work with external original materials

  • Support equipment laboratory about new and modern arrangement and their instantaneous utilize in scholarship-pedagogic activities UMZ

  • Support scholarship-pedagogic growth worker and inceptorinstitution

  • Strengthening web boosters tutorial

Future of Institute


  • Login