Presentation Transcript

1. Some Basic Terminology Solute: chemical species that is dissolved in water; element or compound, charged or neutral Total Dissolved Solids (TDS): total amount of solids remaining when a water sample is evaporated to dryness (mg/L) Related to salinity Fresh water: < 1000 mg/L Drinking water standard = 500 mg/L Brackish water: 1000 – 20,000 mg/L Saline water: > 20,000 mg/L Seawater = 35,000 mg/L (on average) Brines: > 100,000 mg/L
2. Ocean Salinity
3. Solute Concentration Terminology (mass) concentration: mass of solute / unit volume of solution (e.g. mg/L) Molarity (M): (mass of solute/formula weight) / liters of solution = moles/L Molality (m): moles of solute / kg of solution Equivalents/L: (moles of solute x valence of solute) / L of solution = eq/L Used for ion balances, piper diagrams Normality (N): eq/L (primarily used for acids) Parts per million (ppm) by weight: 1 millionth g solute per g of solution = mass of solute / 106 g water commonly used outside academia for most dilute water solutions, mg/L ≈ ppm and molarity ≈ molality
4. Rocks and Minerals
5. At/Near Earth’s Surface:

   Mineralogy of Igneous Rocks:

   Less Stable Bowen’s Reaction Series More Stable
6. Mineralogy of Igneous Rocks Mafic Olivines: fayalite(Fe2SiO4) forsterite(Mg2SiO4) Pyroxenes: wollastonite(CaSiO3) enstatite(MgSiO3) augite((Ca,Na)(Mg,Fe,Al) Plagioclase feldspars: anorthite(CaAl2Si2O8) Amphiboles: hornblende ((Na,K)0-1Ca2(Mg,Fe,Al)5Si6-7.5AlO(OH)2
7. Mineralogy of Igneous Rocks Felsic Feldspars: Albite(NaAlSi3O8) orthoclase (KAlSi3O8) anorthite(CaAl2Si2O8) Micas: muscovite (KAl2[Si3AlO10](OH)2 biotite(K(Mg,Fe) 3AlSi3O10(OH)2) Quartz: SiO2
8. Mineralogy of Metamorphic Rocks Mineral composition reflects parent rocks e.g. marble from limestone (CaCO3)
9. Mineralogy of Sedimentary Rocks Shale: low reactivity Quartz, clay/mica, feldspars, calcite, organic matter Sandstone Quartz, K/Na feldspars, micas, many other minerals Carbonates Calcite: CaCO3 Dolomite: (Ca,Mg)(CO3)2 Chert (SiO2) Clasticsediments Evaporites Gypsum: CaSO4·2H2O
10. Mineralogy of Secondary Minerals Form by chemical reactions (weathering/ diagenesis) between water and primary/ secondary minerals Incongruent dissolution (solid products) Stable, may be in equilibrium with H2O Clays: mineral form depends on reaction type and climate (precipitation, temperature) garbage minerals: chemical composition highly variable, not well known
11. Mineralogy of Clays Mafics(high Mg, Ca, Fe) Chlorite (Mg,Fe)3(Si,Al)4O10(OH)2·(Mg,Fe)3(OH)6 vermiculite smectites (Na,Ca0.5)0.7(Mg,Fe,Al)4(Al,Si)8O20(OH)4kaolinite Al2Si2O5(OH)4 Fe/Al oxides [Al(OH)3, Fe(OH)3]  decreasing cation content Felsic (high Na, K, Si) Illite K15(Mg0.5Al3.5)(AlSi7)O20(OH)4 (close to muscovite) smectiteskaolinte Fe/Al oxides  degree of weathering 80% muscovite, 20% smectite main clay in shales These are general trends observed. Often, several clay minerals exist, but dominant type can be predicted based on rock type and amount of precipitation Illite, kaolinite, chlorite, vermiculite, and montmorillonite common in Illinois
12. Silica Minerals Most Si released by weathering of primary silicates (feldspars, etc.) Quartz (SiO2): not dominant secondary mineral, very resistant to weathering Secondary Si minerals (SiO2) Amorphous silica: non-crystalline Chalcedony (agate): cryptocrystalline Chert: nodules/beds Opal: gem quality Secondary SiO2 is found in all rock types
13. Oxyhydroxides of Fe/Al Also found in all rock types Al: very low solubility (more soluble at high and low pH) Amorphous Al(OH)3 Gibbsite: Al(OH) 3 Fe: Ferric iron (Fe3+), low solubility Amorphous Fe(OH) 3 Goethite: FeOOH Hematite: Fe2O3 Very common in Illinois sediments
14. Carbonates and Sulfates Carbonates Found in almost all geologic environments Formed by 2 most common dissolved ions Calcite: CaCO3 Also dolomite [(Ca,Mg)(CO3)2], siderite [FeCO3] Sulfates Gypsum: CaSO4·2H2O; layers or disseminated Anhydrite: CaSO4
15. Other sources of material to the subsurface Dust Organic matter
16. Dissolved Molecules Dissolved is (somewhat) arbitrarily defined as anything that passes through a 0.45 μm filter > 0.45 μm defined as “suspended” material Some colloids and all nano-particles are < 0.45 μm Aqueous Species refers to any molecule dissolved in water Ions are charged molecules only HCO3- is an ion, H2CO3 is not (uncharged)
17. Dissolved Molecules Major ions defined as being typically > 5 mg/L Cations: Ca2+, Mg2+, Na+ Anions: HCO3-, SO42-, Cl- H4SiO4: almost all dissolved Si in this form In Groundwater, these typically account for > 90% of TDS regardless of TDS value
18. Dissolved Molecules Minor constituents typically between 0.01 and 10 mg/L, higher in unusual situations K+, Fe2+, Mn2+, NO3-, F-, B(OH)3, CO32- Trace constituents usually < 0.1 mg/L Most metals Rare earth elements Arsenic, bromide, iodide, phosphate, radium, uranium

19. Balancing Chemical Reactions

    Reactants Products
20. Balancing Reactions Determine the species involved (reactants and products) and the state (solid, liquid, gas) that each species is in Write an unbalanced equation that summarizes information from step 1 Balance: molar amounts on each side of reaction must be equal Stoichiometry: refers to the mathematical balancing of reactants and products (moles)
21. Balancing Reactions Balancing (determining stoichiometric coefficients) Start with most complicated species Cations first, then Si, then C, then O, then H Check charge balance Assume that H2O, H+, and OH- are readily available since it’s an aqueous reaction In most weathering reactions, acid H+ attacks the mineral Examples…

22. Reactions and Equilibrium

23. Chemical Reactions Chemical reactions usually need water When 2 ions or molecules approach each other closely and establish a bond, a chemical reaction has taken place e.g., precipitating a solid Breaking bonds is also a chemical reaction e.g., dissolving a solid
24. Reactions and Equilibria Let’s add salt (NaCl) to water at constant T, P; add more than can be dissolved Salt crystals will dissolve, Na-Cl bonds are broken, ions (Na+, Cl-) in solution What if we measured the Na+ (or Cl-) concentration in solution over time?
25. Reactions and Equilibria (NaCl) At equilibrium, Na+ and Cl- concentrations in solution become invariant with time This does not mean that all reactions have stopped; both NaCl dissolution and precipitation are still occurring At equilibrium, the rate of NaCl dissolution = rate of NaCl precipitation NaCl(s) Na+ + Cl- and Na+ + Cl-NaCl(s) have the same rates NaCl(s) Na+ + Cl-
26. Equilibrium The system maintains a constant state, and there are no observable changes in the constituents in the solution In Nature, reactions tend to progress to equilibrium That is the preferred state Disequilibrium is inherently unstable But, there are plenty of reactions that are in disequilibrium near the Earth’s surface
27. La Châtelier’s principle When a reaction at equilibrium is disturbed, i.e., if conditions change, a new state of equilibrium will be established to counteract the disturbance e.g., heat up NaCl solution, more NaCl will dissolve Or, we add more water more NaCl will dissolve
28. Saturated solution: can’t dissolve any more
29. Solubility The amount of a compound dissolved to form a saturatedsolution In our example, the amount of NaCl that dissolved Measured in weight per volume (e.g., g/L) Need to state T, P (usually 25°C, 1 atm, which is standard state)
30. Solubility Need equilibrium to define solubility e.g., CaCO3 + 2HCl  Ca2+ + 2Cl- + 2H2O + CO2 In a closed system, reaction will (eventually) reach equilibrium In an open system, this reaction cannot reach equilibrium because CO2 does not accumulate Reaction will proceed until CaCO3 or HCl is used up, i.e., reaction runs to completion Many reactions at/near Earth’s surface do not achieve equilibrium because products escape or are transported away Also many reactions occur slowly
31. Law of Mass Action Mathematical model that explains and predicts behaviors of solutions in equilibrium Valid only for reversible reactions Consider the reaction: A + B  C + D rate of forward reaction (uf) = kf (A)(B) kf = proportionality constant for forward reaction (A) and (B) are in molar amounts Rate a function of reactant concentrations rate of backward reaction (ub) = kb (C)(D)
32. Law of Mass Action A + B  C + D At equilibrium, uf = ub The ratio of products to reactants is fixed So kf (A)(B) = kb (C)(D) = = Keq = the equilibrium constant Keq values have been determined in the lab for many reactions kf (C)(D) kb (A)(B) kf kb
33. Law of Mass Action For reaction: aA + bBcC + dD Where a, b, c, and d are the stoichiometric coefficients for the reactants and products Keq= [(C)c(D)d] [(A)a(B)b] (A), (B), (C), (D) are concentrations at equilibrium [(C)c(D)d] is the reaction quotient (Q) [(A)a(B)b] Q changes until equilibrium is achieved, then it is constant However, strictly speaking this is only valid for ideal gases
34. Solubility Index Calculations We can use the mass action equation to estimate the equilibrium status of a particular reaction. Is the solution undersaturated, oversaturated, or at equilibrium with respect to a mineral? i.e., do we expect it to dissolve or be precipitated?
35. Solubility Index Calculations SI = log IAP – log Keq SI = saturation index IAP = ion activity product = measured concentration (= Q) Keq = equilibrium constant (IAP at equilibrium) If log IAP = log Keq, then SI = 0 (equilibrium): no net dissolution or precipitation of mineral If log IAP < log Keq, SI < 0, solution is undersaturated with respect to that mineral: expect active dissolution If log IAP > log Keq, SI > 0, solution is oversaturated with respect to that mineral: expect active precipitation In practice, if SI = 0 ± 0.5, then water at or close to equilibrium with mineral phase, due to uncertainty in the thermodynamic variables