1 / 15

Distribution of waters

Distribution of waters. 71% of earth surface is ocean 4:1 in southern hemisphere 1.5:1 in northern hemisphere. Surface temperature: note where the 4°C isotherm occurs (most ocean volume is colder than this). DPO Figure 4.1: Winter data from Levitus and Boyer (1994). Surface salinity.

kalea
Download Presentation

Distribution of waters

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Distribution of waters 71% of earth surface is ocean 4:1 in southern hemisphere 1.5:1 in northern hemisphere

  2. Surface temperature: note where the 4°C isotherm occurs (most ocean volume is colder than this) DPO Figure 4.1: Winter data from Levitus and Boyer (1994)

  3. Surface salinity

  4. Surface density (winter) DPO Figure 4.16

  5. Pacific potential temperature section Inversions (“dichothermal layers”) thermocline DPO Fig. 4.11

  6. Pacific salinity section Salinity minimum layers - intermediate waters (Antarctic and North Pacific I.W.) Salinity maximum layers DPO Fig. 4.11

  7. Atlantic potential temperature section Inversions (Antarctic surface and one much deeper, large-scale one) thermocline DPO Fig. 4.10

  8. Salinity minimum layers (Antarctic I.W. and Labrador Sea Water) Salinity maximum layers Mediterranean Water North Atlantic Deep Water Atlantic salinity section DPO Fig. 4.10

  9. Water masses and water types Water mass:“body of water with a common formation history”. Names are capitalized. Water type: point on a temperature-salinity diagram (or more carefully, point in property-property-property-nthproperthy space) Source water type: water type at the source of a water mass

  10. Water mass Example: Antarctic Intermediate Water - (a) low salinity layer, (b) originating in surface mixed layers near Antarctic Circumpolar Current

  11. Deep layer This is a thick layer below the intermediate layer and above the bottom waters. Roughly from 2000 to 4000 m depth. The “North Atlantic Deep Water” originates through deep water formation processes north of the N. Atlantic (joined by Labrador Sea and Mediterranean Sea intermediate waters after they all more or less mix together in the tropical Atlantic). It is relatively “new”. The “Pacific Deep Water” originates through slow upwelling of bottom waters in the North Pacific, and is the oldest water in the ocean. The “Indian Deep Water” is similar to the PDW. The “Circumpolar Deep Water” is a mixture of these new (NADW) and old (PDW and IDW) waters.

  12. Bottom layer This is the bottommost layer, and usually connotes very dense water from the Antarctic. (Formed by brine rejection close to the continent). Various names: “Antarctic Bottom Water” “Lower Circumpolar Deep Water”

  13. Maximum mixed layer depth (mainly late winter in each location) Using delta T = 0.2°C deBoyerMontegut et al. (JGR, 2004)

  14. Mixed layer development Winter development of mixed layer: Wind stirring and cooling erode stratification, gradually deepening the mixed layer to maximum depth at the end of winter (Feb. to April depending on location) Summer restratification: Warming at the top adds stratified layer at surface, usually leaves remnant of winter mixed layer below. DPO Figure 4.7 Large, McWilliams and Doney (Rev. Geophys 1994)

  15. Mixed layer development Winter development of mixed layer: Wind stirring and cooling erode stratification, gradually deepening the mixed layer to maximum depth at the end of winter (Feb. to April depending on location) Summer restratification: Warming at the top adds stratified layer at surface, usually leaves remnant of winter mixed layer below. DPO Figure 8.4

More Related