1 / 12

Mapping the Bluetooth Specification to IEEE 802.15.1

Mapping the Bluetooth Specification to IEEE 802.15.1. Tom Siep Texas Instruments siep@ti.com. RADIO SPECIFICATION A1 SCOPE A2 FREQUENCY BANDS AND CHANNEL ARRANGEMENT A3 TRANSMITTER CHARACTERISTICS A4 RECEIVER CHARACTERISTICS BASEBAND SPECIFICATION B1 GENERAL DESCRIPTION

jwight
Download Presentation

Mapping the Bluetooth Specification to IEEE 802.15.1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Mapping the Bluetooth SpecificationtoIEEE 802.15.1 Tom SiepTexas Instruments siep@ti.com Tom Siep, Texas Instruments

  2. RADIOSPECIFICATION A1 SCOPE A2 FREQUENCY BANDS AND CHANNEL ARRANGEMENT A3 TRANSMITTER CHARACTERISTICS A4 RECEIVER CHARACTERISTICS BASEBAND SPECIFICATION B1 GENERAL DESCRIPTION B2 PHYSICAL CHANNEL B3 PHYSICAL LINKS B4 PACKETS B5 ERROR CORRECTION B6 LOGICAL CHANNELS B7 DATA WHITENING B8 TRANSMIT/RECEIVE ROUTINES B9 TRANSMIT/RECEIVE TIMING B10 CHANNEL CONTROL B11 HOP SELECTION B12 VOICE CODEC B13 BLUETOOTH ADDRESSING B14 BLUETOOTH SECURITY LINK MANAGER PROTOCOL C1 GENERAL C2 FORMAT OF LMP C3 THE PROCEDURE RULES AND PDUs C4 CONNECTION ESTABLISHMENT C5 SUMMARY OF PDUs C6 TEST MODES C7 ERROR HANDLING L2CAP L1 INTRODUCTION L2 GENERAL OPERATION L3 STATE MACHINE L4 DATA PACKET FORMAT L5 SIGNALLING L6 CONFIGURATION PARAMETER OPTIONS L7 SERVICE PRIMITIVES L8 SUMMARY L2CAP APPENDIX A: CONFIGURATION MSCS L2CAP APPENDIX B: IMPLEMENTATION GUIDELINES Outline of Bluetooth Specification Tom Siep, Texas Instruments

  3. Outline of an 802 MAC/PHY Standard 1) Overview 2) Normative References 3) Definitions 4) Abbreviations and Acronyms 5) General Description 6) Medium Access Control (MAC) 7) Physical Layer (PHY) 8) Layer Management A. Protocol Implementation Conformance Statement proforma B. Formal Description of MAC operation C. Formal Description of PHY operation D. MAC Management Information Base E. PHY Management Information Base F. Bibliography Tom Siep, Texas Instruments

  4. Mapping Overview Tom Siep, Texas Instruments

  5. ACL MIB SCO L2CAP Signals. Connection Mgmt MUX/ DEMUX Voice Codec Fragmentation LMP PDUs Link-level Security SCO/ACL Demux Scheduling Piconet & Link Management ARQ Control Encryption Link Information Packet Coding Power Control Timing / Frequency Selection MLME MAC PLME PHY Mapping the MAC and MLME Tom Siep, Texas Instruments

  6. IEEE 802.15.1 Introductory Material Tom Siep, Texas Instruments

  7. IEEE 802.15.1 MAC1 of 2 Tom Siep, Texas Instruments

  8. IEEE 802.15.1 MAC2 of 2 Tom Siep, Texas Instruments

  9. IEEE 802.15.1 PHY Tom Siep, Texas Instruments

  10. IEEE 802.15.1 Layer Management Tom Siep, Texas Instruments

  11. IEEE 802.15.1 Annexes Tom Siep, Texas Instruments

  12. More Information 99059r4P802-15_Mapping-Between-Bluetooth-802-15-1.doc Will be on Flash after this meeting, may be updated this week Tom Siep, Texas Instruments

More Related