1 / 9

AutoDiscovery

AutoDiscovery. Device Attributes Discovery Ports Discovery CDP Neighbours Discovery Layer 3 Hosts Discovery. Introduction. Reliable monitoring and efficient use depends on the accuracy of the entered data that describe the network and the network devices. AutoDiscovery function aims:

Download Presentation

AutoDiscovery

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. AutoDiscovery Device Attributes Discovery Ports Discovery CDP Neighbours Discovery Layer 3 Hosts Discovery

  2. Introduction • Reliable monitoring and efficient use depends on the accuracy of the entered data that describe the network and the network devices. • AutoDiscovery function aims: • Easing the initial database population • Updating - topology, new devices and relevant data • Discovery on hop-by-hop basis • Better overview and control over the process • No retrieval of the entire network • Possibility of clear database organisation in the system

  3. Location 1 Router 1 Location A Serial 0 Serial 0 Serial 1 Router A Serial 1 M M PC1 PC5 Router A PC2 PC4 Router B PC3 Router C Router A1 Router D Router A2 Router A3 Router A3 LocationA3 • notes • …

  4. Principles • AutoDiscovery functions are performed on the Device objects or their Ports • Data is read and retrieved via SNMP • Result are shown in the Message panel • AutoDiscoveryfunctions perform following actions: • Attempts to find the discovered Devices in the database • Device already exists in the database -> update of the object properties and Links • Device does not exist in the database -> Device is created in the Discovered Folder, located underneath the Device on which the AutoDiscovery service was initialised. • Links are being set to the discovered Devices/Ports, depending on the type of initialized AutoDiscovery function.

  5. Device Attributes Discovery • Setting the Name information for every SNMP enabled device • For Cisco Systems devices, finds serial number and model information • Plans for the future… • Deeper and intelligent analysis • Discovering type of the device and manufacturer • Discovering device attributes (type of hardware, type of OS, memory and storage size…)

  6. Ports Discovery • Discovers all network interfaces (ports) with following attributes: • short and full name of the port • description of the port • bandwidth • SNMP ID • Port objects are updated or created under the Device in the information system hierarchy and each Port is linked to the parent Device • SNMP ID – index to member in OID list - the most important port attribute • Optional selection of automatic PortDiscovery function on the Devices on daily basis • Persistent interface indexes

  7. CDPNeighbours Discovery • Based on CDP (Cisco Discovery Protocol) • Discovering neighbour devices • Creating the Links between Devices • CDP offers the information about models of these devices, as well as connected ports • The final result is creating Links between two Ports of neighbouring Devices, which represents the topological connection in this part of the computer network • Cisco only up to now - waiting for the Link Layer Discovery Protocol (LLDP) and MIB…

  8. Layer 3 Hosts Discovery • Started on routers (Layer 3 device) or router ports • Discovers all IP address of end devices (hosts) on adhering local segments (sub-networks) • Based on ARP table • NetIIS system gets the address range in the adhering sub-network. This address range is pinged, in order to refresh the router’s ARP table, from where IP and MAC addresses of end devices are retrieved • NetBIOS and DNS names are requested from host devices, which are set in the Device name • A new object type Device is created within the Discovered Folder, which presents the local sub-network, under a name based on the IP address and length of the mask split with an under score (e.g. 10.1.2.0_24)

  9. AutoDiscoverySummary Device Attributes Discovery Ports Discovery CDP Neighbours Discovery Layer 3 Neighbours Discovery

More Related