1 / 25

Electromagnetics ENGR 367

Electromagnetics ENGR 367. Inductance. Introduction. Question: What physical parameters determine how much inductance a conductor or component will have in a circuit? Answer: It all depends on current and flux linkages!. Flux Linkage. Definition:

josette
Download Presentation

Electromagnetics ENGR 367

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Electromagnetics ENGR 367 Inductance

  2. Introduction • Question: What physical parameters determine how much inductance a conductor or component will have in a circuit? • Answer: It all depends on current and flux linkages!

  3. Flux Linkage • Definition: the magnetic flux generated by a current that passes through one or more conducting loops of its own or another separate circuit • Mathematical Expression:

  4. Types of Inductance • Self-Inductance (L): whenever the flux linkage of a conductor or circuit couples with itself • Mutual Inductance (M): if the flux linkage of a conductor or circuit couples with another separate one

  5. Self-Inductance • Formula by Definition • Applies to linear magnetic materials only • Units:

  6. Inductance of Coaxial Cable • Magnetic Flux • Inductance (as commonly used in transmission line theory)

  7. Inductance of Toroid • Magnetic Flux Density • Magnetic Flux • If core small vs. toroid

  8. Inductance of Toroid • Inductance • Result assumes that no flux escapes through gaps in the windings (actual L may be less) • In practice, empirical formulas are often used to adjust the basic formula for factors such as winding (density) and pitch (angle) of the wiring around the core

  9. Alternative Approaches • Self-inductance in terms of • Energy • Vector magnetic potential (A) • Estimate by Curvilinear Square Field Map method

  10. Inductance of a Long Straight Solenoid • Energy Approach • Inductance

  11. Internal Inductance of a Long Straight Wire • Significance: an especially important issue for HF circuits since • Energy approach (for wire of radius a)

  12. Internal Inductance of a Long Straight Wire • Expressing Inductance in terms of energy • Note: this result for a straight piece of wire implies an important rule of thumb for HF discrete component circuit design: “keep all lead lengths as short as possible”

  13. Example of Calculating Self-Inductance • Exercise 1 (D9.12, Hayt & Buck, 7th edition, p. 298) Find: the self-inductance of a) a 3.5 m length of coax cable with a = 0.8 mm and b = 4 mm, filled with a material for which r = 50.

  14. Example of Calculating Self-Inductance • Exercise 1 (continued) Find: the self-inductance of b) a toroidal coil of 500 turns, wound on a fiberglass form having a 2.5 x 2.5 cm square cross section and an inner radius of 2.0 cm

  15. Example of Calculating Self-Inductance • Exercise 1 (continued) Find: the self-inductance of c) a solenoid having a length of 50 cm and 500 turns about a cylindrical core of 2.0 cm radius in which r = 50 for 0 <  < 0.5 cm and r = 1 for 0.5 <  < 2.0 cm

  16. Example of Estimating Inductance: Structure with Irregular Geometry • Exercise 2: Approximate the inductance per unit length of the irregular coax by the curvilinear square method

  17. Mutual Inductance • Significant when current in one conductor produces a flux that links through the path of a 2nd separate one and vice versa • Defined in terms of magnetic flux (m)

  18. Mutual Inductance • Expressed in terms of energy • Thus, mutual inductances between conductors are reciprocal

  19. Example of Calculating Mutual Inductance • Exercise 3 (D9.12, Hayt & Buck, 7/e, p. 298) • Given: 2 coaxial solenoids, each l = 50 cm long 1st: dia. D1= 2 cm, N1=1500 turns, core r=75 2nd: dia. D2=3 cm, N2=1200 turns, outside 1st • Find: a) L1=? for the inner solenoid

  20. Example of Calculating Mutual Inductance • Exercise 3 (continued) • Find: b) L2 = ? for the outer solenoid • Note: this solenoid has inner core and outer air filled regions as in Exercise 1 part c), so it may be treated the same way!

  21. Example of Calculating Mutual Inductance • Exercise 3 (continued) • Find: M = ? between the two solenoids

  22. Summary • Inductance results from magnetic flux (m) generated by electric current in a conductor • Self-inductance (L) occurs if it links with itself • Mutual inductance (M) occurs if it links with another separate conductor • The amount of inductance depends on • How much magnetic flux links • How many loops the flux passes through • The amount of current that generated the flux

  23. Summary • Inductance formulas may be derived from • Direct application of the definition • Energy approach • Vector Potential Method • The self-inductance of some common structures with sufficient symmetry have an analytical result • Coaxial cable • Long straight solenoid • Toroid • Internal Inductance of a long straight wire

  24. Summary • Numerical inductance may be evaluated by • Calculation by an analytical formula if sufficient information is known about electric current, dimensions and permeability of material • Approximation based on a curvilinear square method if axial symmetry exists (uniform cross section) and a magnetic field map is drawn

  25. References • Hayt & Buck, Engineering Electromagnetics, 7/e, McGraw Hill: Bangkok, 2006. • Kraus & Fleisch, Electromagnetics with Applications, 5/e, McGraw Hill: Bangkok, 1999. • Wentworth, Fundamentals of Electromagnetics with Engineering Applications, John Wiley & Sons, 2005.

More Related