1 / 26

A Crash Course in LEGO NXT Robotics - Getting Started

A Crash Course in LEGO NXT Robotics - Getting Started. Meri V. Cummings, Ph.D. NASA-sponsored Classroom of the Future Center for Educational Technologies Wheeling Jesuit University 316 Washington Ave. Wheeling, WV 26003 Phone: 304-243-2499 E-mail: meri@cet.edu

jonny
Download Presentation

A Crash Course in LEGO NXT Robotics - Getting Started

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A Crash Course in LEGO NXT Robotics - Getting Started Meri V. Cummings, Ph.D. NASA-sponsored Classroom of the Future Center for Educational Technologies Wheeling Jesuit University 316 Washington Ave. Wheeling, WV 26003 Phone: 304-243-2499 E-mail: meri@cet.edu URL: http://www.cet.edu/robotics/

  2. Why Study Robotics? • Robotics is an excellent way to introduce the students to integrated STEM areas (science, technology, engineering, and mathematics) • Students participating in robotics learn about STEM careers and experience the same activities as professionals solving real-world problems • Everyone – girls and boys alike – should get a chance to see how much fun it is learning engineering skills this way!

  3. Organized Chaos Girl Scouts robotics team at the West Virginia FIRST LEGO League tournament - you’re welcome to observe our Power Puzzle competition on Saturday, Dec. 15, 2007!

  4. The Least You Need • One computer (ideally, a school computer lab with LEGO MINDSTORMS Education Software installed) • One robotics kit, LEGO MINDSTORMS Education Base Set ($250), per 2-10 youth - I recommend you start with a small group (e.g., 4 students) – 1 kit per 2 students is perfect – you might also want several Education Resource sets (spare parts) • LEGO MINDSTORMS Education Software to program the robot ($49 single to $265 site license)

  5. The Least You Need (cont’d) • The LEGO NXT robot can also be programmed with ROBOLAB software • One Mindstorms NXT Base Set and one computer (ideally, a school computer lab with ROBOLAB installed and one base set per two students) • ROBOLAB software to program the robot ($69 single to $265 site license) – you need ROBOLAB version 2.9 ($49 upgrade)

  6. The Least You Need (cont’d) • Instructional materials – I recommend the ROBOLAB Video Trainer CD, which has excellent programming video sequences ($50 single or $100 site) • Robotics kits can be shared in your school, county, or state in 6- to 8-week rotations – they can be used all day for different school and afterschool activities

  7. Funding Sources • Utility companies are required to provide educational grants – some have utility robotics program partner grants (e.g., American Electric Power has an AEP-FLL partner award to customers in its service area) – ask yours! • NASA Space Grant Consortiums fund outreach programs

  8. After you’ve learned the basics, then what? • There are lots of robotics competitions kids can participate in, such as FIRST LEGO League (FLL) and Botball - some are local, some statewide, some are regional • The tournaments tend to include multipart, real-world problems and research and occur over specific time periods - for instance, the FLL challenge is released in mid-Sept. each year and competitions occur from Nov. through Feb.

  9. The Problem-solving Process • What is the robot’s task? • What behaviors are needed to accomplish it? • Create the program – debug then download. • Run the program. • Is the NXT behaving badly (doesn’t do task)? • Check the robot first. If there’s a problem, can you fix it? • Next, check the program. Problem? Can you fix it? • Last, go back to the beginning and reread the task. Does your program really tell the robot what it’s supposed to do?

  10. Challenge 1: Line Program • Create and test a program to make the robot go forward in a straight line for exactly 1 second • Save your program as your first name and Line (e.g., FileSave as Maria LineEnter)

  11. Challenge 2: Square Program • Create and test a program to make the robot go in a square • Save your program as your first name and Square

  12. Challenge 3: Light Dark Program Create and test a program to make the robot: • Go forward until it finds a dark line • Stop for 1 second • Go forward until it finds light • Stop for 1 second • Reverse for 4 seconds • Save your program as your first name and Light Dark

  13. Challenge 4: Tracker Program Create a program to make the robot: • Go forward until it finds a dark line • Move forward along the edge of the line • Save your program as your first name and Tracker Hints: You need a loop, and it’s easier if the robot starts at less than a 90 angle

  14. Challenge 5 – Bump Program Create a program to make the robot: • Go forward until it finds a wall • Turn moving backward for 2 seconds • Repeat these behaviors for 5 “wall bumps” • Save your program as your first name and Bump Hint: You’ll need to use wait until Touch in for the first step.

  15. Bonus Beep Challenge Create a program to make the robot: • Go forward until it finds a line • Stop for 1 second and beep • Repeat for 5 lines • For fun, end with a different sound • Save your program as your first name and Beep

  16. ROBOLAB Video Trainer • ROBOLAB Video Trainer CD has lots of video sequences showing you how to program ROBOLAB and how the robot responds to the program • LEGO Mindstorms Education Base Set and ROBOLAB and ROBOLAB Video Trainer software are available from LEGO education (www.legoeducation.com under LEGO Mindstorms) • LEGO MINDSTORMS Education software has a built-in reference tool – Robot Educator, that walks you through simple challenges • Additional software can be found at the Robotics Academy (http://www-education.rec.ri.cmu.edu/ )

  17. Robotics Web Sites • NASA Robotics Alliance Project http://robotics.nasa.gov/home.php • NASA Robotics Curriculum Clearinghouse http://robotics.nasa.gov/rcc/ • Mars Exploration Rover Mission http://marsrovers.jpl.nasa.gov/home/index.html • Robotics Academy http://www-education.rec.ri.cmu.edu/ • Minnesota High-Tech Kids http://www.hightechkids.org • FIRST LEGO League http://www.firstlegoleague.org • Botball http://www.botball.org/ • BEST Robotics http://www.bestinc.org/MVC/

  18. Sample ROBOLAB Programs

  19. Sample NXT Programs Challenge 1 – Forward for 1 second Challenge 2 – Square with a sound Challenge 3 – Detecting Light/Dark

  20. NXT Programming Details Select a motor icon (you’ll see a blue border around it) to open its control panel - displayed at the bottom of the screen Additional control panels for sensors and wait for icons have similar displays

  21. NXT Programming Details (cont’d) • Due to the limited amount of memory available for the NXT, all currently installed sound files should be deleted • Sound files take up a lot of space and should be used selectively • Use the same sound file repeatedly in stored programs to cut down on memory usage

  22. Want to Learn More? • If you have a group of West Virginia educators that want to get started, contact me to schedule a workshop and design a program plan that will work for your situation – courtesy of NASA West Virginia Space Grant Consortium!

  23. Hands-on: Your Turn! • Use LEGO MINDSTORMS Educator to program the NXT robot to move in a square • Think about the robot’s required behaviors to move in a square • What motors have to do what for each behavior? • Which behaviors repeat? You can loop them!

  24. ROBOLAB Basics • Go to RCX settings in Administrator to unlock programs 1 and 2. • Single-click the silver Programmer button • Double-click the Inventor 4 button. • Maximize the lower Block Diagram window. • Drag the Function bar to move the Functions palette to the lower right of the window. • If the Block Diagram window is accidentally closed, open it by hitting Window -> Show Block Diagram. • Hit Tab key to switch from hand to cursor tool.

  25. ROBOLAB Basics (cont’d) • Hit spacebar to toggle between cursor and wiring tool. • Hit Esc to escape sticky wires. • Click on a wire or icon and hit Del to remove it. • Drag an icon within a cm of another, then with the mouse still down, tap the spacebar to shoot a wire between the icons. • Ctrl + B removes broken or partially deleted wires. • Right-click an icon to replace it with another using a new popup Functions Palette.

  26. ROBOLAB Basics (cont’d) • Always break a wire instead of placing a new icon on top of the wire; otherwise, the icon looks wired when it isn’t. • Click on Help-Show context help, then on the icon itself in the block diagram to learn more about a ROBOLAB icon, including seeing what modifiers each icon requires and where to attach them and to see the icon in a sample program. • If the white download arrow under Edit is broken, click on the broken arrow for information about where the program is miswired.

More Related