1 / 26

Costs and production

Costs and production. Total costs. fixed costs – costs that do not vary with the level of output. Fixed costs are the same at all levels of output (even when output equals zero). variable costs – costs that vary with the level of output (= 0 when output is zero). Example. Example (cont.).

Download Presentation

Costs and production

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Costs and production

  2. Total costs • fixed costs – costs that do not vary with the level of output. Fixed costs are the same at all levels of output (even when output equals zero). • variable costs – costs that vary with the level of output (= 0 when output is zero)

  3. Example

  4. Example (cont.)

  5. Fixed costs

  6. Variable costs

  7. TC, TVC, and TFC

  8. Average fixed cost • Average fixed cost (AFC) = TFC / Q

  9. Average variable cost • Average variable cost (AVC) = TVC / Q

  10. Average total cost • Average total cost (ATC) = TC / Q • ATC = AFC + AVC (since TFC + TVC = TC)

  11. Marginal cost • Marginal cost (MC) = cost of an additional unit of output

  12. Average fixed cost

  13. AVC, ATC, and MC • Note that the MC curve intersects the AVC and ATC at their respective minimum points

  14. Long-run costs • In the long run, a firm may choose its level of capital, and will select a size of firm that provides the lowest level of ATC.

  15. Economies and diseconomies of scale • Economies of scale – factors that lower average cost as the size of the firm rises in the long run • Sources: specialization and division of labor, indivisibilities of capital, etc. • Diseconomies of scale – factors that raise average cost as the size of the firm rises in the long run • Sources: increased cost of managing and coordination as firm size rises • Constant returns to scale – average costs do not change as firm size changes

  16. Long-run average total cost (LRATC)

  17. Minimum efficient scale • Minimum efficient scale = lowest level of output at which LRATC is minimized

  18. Production • The total amount of output produced by a firm is a function of the levels of input usage by the firm • Total Physical Product (TPP) function - a short-run relationship between the amount of labourand the level of output, ceteris paribus.

  19. Total physical product (TPP)

  20. Law of diminishing returns • as the level of a variable input rises in a production process in which other inputs are fixed, output ultimately increases by progressively smaller increments.

  21. Average physical product (APP) • APP = TPP / amount of input

  22. Marginal physical product (MPP) • the additional output that results from the use of an additional unit of a variable input, holding other inputs constant • measured as the ratio of the change in output (TPP) to the change in the quantity of labor (or other input) used

  23. Computation of MPP and APP • Note that the MPP is positive when an increase in labor results in an increase in output; a negative MPP occurs when output falls when additional labor is used.

  24. TPP

  25. Relationship of APP and MPP • APP rises when MPP > APP • APP falls when MPP < APP • APP is maximized when MPP = APP

  26. Bibliography: • http://www.oswego.edu/~kane/eco101.htm • Czarny B. „Podstawy ekonomii”, PWE, 2002

More Related