1 / 11

Premio Athena 845E Training

Premio Athena 845E Training. Premio Zeus DX Server Training By Calvin Chen Technical Director. Agenda. System Overview Target Market System Specifications Integrated Device and Back I/O System Board Diagram N+1 Power Supply Summary. System Overview.

joie
Download Presentation

Premio Athena 845E Training

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Premio Athena 845E Training Premio Zeus DX Server Training By Calvin Chen Technical Director

  2. Agenda • System Overview • Target Market • System Specifications • Integrated Device and Back I/O • System Board Diagram • N+1 Power Supply • Summary

  3. System Overview • The Zeus DX is our dual Xeon™ processor server • The server system board will be MSI-9101, based on the Intel E7500 chipset • The chassis will be our Zeus chassis with a single SCSI backplane for six SCA hot swappable SCSI HDDs support • The power supply will be a redundant N+1 at 600W • The Zeus DX is convertible between a pedestal unit and a 5U rackmount unit

  4. Target Market • The target market of the Zeus DX server is medium to large corporations • Any firm that requires a high performance dual Xeon server with redundancy on the power supply and storage subsystem (via RAID 5) • Depending on usage, the Zeus DX server can support anywhere from 50 (base configuration) to 500 or more (full loaded server) users

  5. Target Market (cont.) • Intel is aggressively moving their server processors from Pentium III to Xeon, and their pricing reflects this • Consider, as an example, our current Zeus PIII server (base server, 1 x PIII/1.40GHz, and 512MB [2 x 256MB]) price is $1615 • For the Zeus DX server (base server, 1 x Xeon/2.0A GHz, and 512MB) price is $1646 • For $31 more, you’re getting a Xeon based server with faster DDR memory • And on the Zeus DX you get 1 x 10/100Mbps and 1 x 10/100/1,000Mbps integrated Intel network adapter, as compared to only 2 x Intel 10/100Mbps on the Zeus PIII server • So now is a good time to tell your customers to move from PIII to Xeon servers

  6. System Specifications • Chassis and Bays - Zeus server chassis with 600W N+1 redundant power supply - 3 x 5.25” external bays (optical or tape backup drives) - 1 x 3.5” external bay (floppy disk drive) - 6 x SCA bays (for 1” height SCSI 80 pins hotswap HDDs) - Dimension (as pedestal): 8.5” width x 17.0” height x 25.5” depth • Chipset / Processor Support - Intel E7500 – dual socket 603 - Intel Xeon (512K) @ 2.0A, 2.2GHz, or higher - Intel Hyper-Threading technology - Intel NetBurst™ Microarchitecture (400MHz front side bus) • Memory Subsystem - 6 x 184 pins DDR200 DIMM slots. ECC/registered only - 12GB maximum memory capacity • Expansion Slots - 5 x PCI (64 bit/66MHz) slots - 1 x PCI (32 bit/33MHz) slot

  7. Integrated Devices and Back I/O • Floppy Disk Controller - 1 x internal FDD channel • IDE Controller - 2 x ATA-100 IDE channels • SCSI Controller - 1 x Adaptec Ultra160 AIC-7899W • Networking - 1 x 82550EY 10/100Mbps - 1 x 82544GC 10/100/1,000Mbps (gigabit) • Video - 1 x ATI Rage XL with 8MB • Legacy Ports - 1 x rear PS/2 keyboard port - 1 x rear PS/2 mouse port - 1 x rear COM/serial port - 1 x rear LPT/parallel port • USB 1.1 Controller - 2 x rear USB 1.1 ports

  8. System Board Diagram PCI 64 bit/66MHz 6 x DDR200 DIMM Slots (12GB max) PCI 32 bit/33MHz Adaptec Ultra160 Socket 603 2 x ATA-100

  9. N+1 Power Supply • N+1 redundancy for power supply is similar RAID 5 for SCSI HDDs • Today’s servers are requiring more and more power • It’s no longer practical to make two identical power supply and have the backup unit sit idle doing nothing, until the primary power supply fails • The picture on the right is the Zeus DX N+1 power supply layout; notice there are THREE hot swappable modules; each module is 300W • At any given time, only two modules are active: effectively giving us 600W of combined power • If one of the module fails, the other 300W module kicks in • You then simply remove (or hot swap out) the failed module and replace it

  10. Conclusion • The Zeus DX is available NOW • Siebel model name is “S – Premio Zeus/DX” • Ideal for medium to large size business • High performance Xeon processor and DDR memory subsystem • 600W N+1 redundancy for the power supply • Up to 12GB of memory

  11. The End

More Related