1 / 58

SENA

SENA. HelloDevice Super series SS100/110/400/800. One-Stop Solution in Device Networking. Dec, 2004. Contents. Overview Configuration Ways Text-based Interface Web-based Interface Features Operation Modes TCP/UDP Multiple Remote Hosts Security PC Card Support Data Logging

Download Presentation

SENA

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SENA HelloDevice Super series SS100/110/400/800 One-Stop Solution in Device Networking Dec, 2004

  2. Contents • Overview • Configuration Ways • Text-based Interface • Web-based Interface • Features • Operation Modes • TCP/UDP Multiple Remote Hosts • Security • PC Card Support • Data Logging • Event Handling • SNMP • Dynamic Domain Name • Customization Support • Case Studies • Door Access Application (Customized) • Medical Application (Customized) • Bridge Monitoring System

  3. Overview (1) • Linux-based Open platform (kernel 2.4.2) • Supports 1/4/8 serial port (RS232/422/485) • 1 PCMCIA slot • ATA flash memory, LAN/WLAN, PSTN/CDMA Modem • Flexible host mode mode • TCP/UDP single/multi-session support • Primary/Secondary host support • Powerful Security • Industry-standard encryption support • SSL v3, and TLS v1 • Encryption algorithm support • 3DES, and RC4 • Flexible customization • Linux CLI with development environment • Source file add/modify/compile/link in 1MB user space • Web customization

  4. Overview (2) Connections Device Remote Host Host (SS) Any device with serial interface • RS-232 • RS-422 • RS-485 • LAN • Wireless (802.11b) • PSTN • Mobile (CDMA)

  5. Configuration Ways Text-based Interface Web-based Interface

  6. Text-based Interface • System Console • Telnet (port 23) or • SSH (port 22) • Privileges • Admin user can access and edit configuration parameters. • Root user can have full control on SS via CLI, in addition to access and configuration rights.

  7. Web-based Interface Web-based interface using web browsers such as IE, Netscape and Opera

  8. Features Operation Modes TCP/UDP Multiple Remote Hosts Security PC Card Support Data Logging and Event Handling SNMP Dynamic Domain Name Customization Support

  9. Operation modes Various operation modes Remote host • TCP/UDP device TCP/UDP socket Remote host • modem emulation DTE TCP socket • Dial-in/out mode Remote host modem TCP socket modem DTE

  10. TCP/UDP Multicasting Overview Configuration Connection Application Diagram Application Areas

  11. Overview • SS supports an enhancement transmission method "TCP/UDP multicasting", which transmits serial device data to multiple hosts simultaneously. • Max. 32 hosts (incoming+outgoing) per one port allowed. • Max. 16 outgoing connections (registered remote hosts) per one port allowed • Each registered TCP host can have a backup host • UDP host mode does not support backup host since there is no way to check status of primary remote host. • Multicasting feature is very useful in application areas where user needs to transmit a message to several display signboard devices simultaneously.

  12. Configuration • Access the SS web interface • Choose Serial port --> Configuration --> Port # --> Remote host configuration

  13. Connection

  14. Application Diagram

  15. Application Areas Applications which require Multiple data transmission include: • LED Signboard, • Electronic Metering, • Any customer requiring Multiple data transmission.

  16. Security SSL Encryption: Overview SSL Encryption: Configuration SSL Encryption: Connection Other Security Features Application Areas

  17. SSL Encryption: Overview • SSL creates a secure connection between a client and a server, over which any amount of data can be sent securely. • By setting the cryptography method as one of SSLv2, SSLv3, SSLv3 rollback to v2 or TLSv1, the Super Series can communicate with other device supporting SSL/TLS cryptography method in encrypted sessions. • SSL configuration settings are available only when the host mode is set to TCP or Modem Emulation mode. • SSL works by using a private key to encrypt data that's transferred over the SSL connection.

  18. SSL Encryption: Configuration • Access the SS web interface • Choose Serial port --> Configuration --> Port # --> Host mode configuration • Choose Serial port --> Configuration --> Port # --> Cryptography configuration

  19. SSL Encryption: Connection • Run SSL or TLS client application • openssl s_client –connect 192.168.0.2:6001 –ssl3

  20. Other Security Features • Serial data encryption • 3DES, RC4 • Static Key encryption • Secured Web interface • HTTPS • IP filtering • serial port based IP filtering • box based IP filtering • Secured file uploading • SCP

  21. Application Areas Applications which require more secure communications include: • Financial, • Retail/POS, • Government, • Medical, and • Any customer requiring enhanced security to protect sensitive information.

  22. PC Card Support Overview CF Memory card configuration Modem card configuration LAN card configuration WLAN card configuration

  23. Overview • PC card types that can be added to the SS include a serial modem, compact-flash card, wireless LAN card, and a network LAN card.

  24. CF Memory card configuration • Access the SS web interface • Choose PC Card --> Configuration

  25. Modem card configuration • Access the SS web interface • Choose PC Card --> Configuration

  26. LAN card configuration • Access the SS web interface • Choose PC Card --> Configuration

  27. WLAN card configuration • Access the SS web interface • Choose PC Card --> Configuration

  28. Data Logging and Event Handling Overview Data Logging Configuration Data Event Handling Configuration Data Event Handling Test

  29. Overview • The SS can capture all system and port data, and save it into a log file. This buffer can be viewed from the web, saved to memory, or saved to a Flash Card, syslog server or NFS server. • System logs track events such as logins, authentication failures, system configuration changes, and more. • Port logs document the data flow through the SS serial ports. • In addition, the SS can be configured for system alerts and notifications. It can send email messages when an alarm message is detected in the serial port data. • The SS uses SMTP for sending email notifications and SNMP for trap alerts.

  30. Data Logging Configuration • Access the SS web interface • Choose Serial port --> Configuration --> Port # --> Port logging

  31. Data Event Handling Configuration • Access the SS web interface • Choose Serial port --> Configuration --> Port # --> Port logging

  32. Data Event Handling Test • Event Handling via SNMP browser and SMTP email

  33. SNMP Overview Configuration Connection

  34. Overview • SS supports SNMP that provides status and performance of connected serial devices through their Ethernet connections. • Applications such as NMS or an SNMP browser can exchange information with the SS. • The SS supports SNMP authentication, Login, and Link up traps. • The SS supports both versions 1 and 2 of the SNMP protocol and delivers the System and Port alerts as traps.

  35. Configuration • Access the SS web interface • Choose Network --> SNMP configuration

  36. Connection • Authentication, Login, and Link up traps in Kiwi SNMP browser

  37. Dynamic Domain Name Overview Configuration and Connection

  38. Overview • Dynamic DNS Protocol enables users to access the SS via a domain name for floating IP environments such as DSL line and DHCP. • To use this service, users must set-up an account in Dynamic DNS Network Services and add domain name, user name and password on the SS DDNS configuration page. • Whenever user reboots the SS in floating IP environments, it sends updated IP address to Dynamic DNS Network Services.

  39. Configuration and Connection • Access the SS web interface • Choose Network --> Dynamic DNS configuration • Access the SS web interface and use domain name • For e.g., ismdemo.dyndns.biz

  40. Customization Support Overview User Web Customization - HTML pages User Web Customization – CGI & Java pages Serial Filter Application

  41. Overview • Web customization options • Plain HTML files • CGI written in C • User application implementation • Filter applications in C • Other applications in C or shell scripts • To quickly develop custom applications that run on the HelloDevice Super Series, SDK (Software Development Kit) is needed. • SS SDK is a 256MB CF card composed of executable binaries (including gcc), header files, and library files. • Executable binaries run on SS (MPC855T Linux) • Header files and Library files are compatible with SS platform • With SS SDK, users can compile their own C/C++ source code to run on SS without installing cross-compile utilities on their PC.

  42. User Web Customization - HTML pages (1/3) Preparation • If you are using Windows, using SCP (secure copy protocol) client tools for Windows will be handy for file transfer from/to SS • Winscp (GUI) • Download @ http://winscp.sourceforge.net/eng/ • Install as other applications • Pscp (command line interface) • Download pscp.exe @ http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html • Copy pscp.exe into C:\Windows directory

  43. Prepare index.html file and other related files (e.g. index.html and webtest.swf) Just copy the files to SS, /usr2/usrweb directory using SCP tools (e.g. winscp) and it will work! User Web Customization - HTML pages (2/3) Running User HTML file

  44. User Web Customization - HTML pages (3/3) Browsing SS User Web Pages

  45. User Web Customization – CGI & Java pages (1/3) Preparation: Recognizing SDK Card • After recognition, SDK is mounted on /mnt/flash/ directory root@192.168.0.15:~# editconf ------------------------------------------------------------------------------ Welcome to SS-110 configuration page … IP mode: DHCP IP address: 192.168.0.15 ------------------------------------------------------------------------------ Select menu: 1. Network configuration … <Enter> Refresh ---> 3 ------------------------------------------------------------------------------ PC Card configuration ------------------------------------------------------------------------------ Currently configured PC card: (none) Select menu: 1. Change card configuration 2. Stop the card service to disable or remove card 3. Probe a new card <ESC> Back, <Enter> Refresh ---> 3 Do you want to probe a new pc card? (y/n): y A new PC card is discovered. ------------------------------------------------------------------------------ PC Card configuration ------------------------------------------------------------------------------ Currently configured PC card: ATA/IDE fixed disk card Model: SanDisk SDP 5/3 0.6 Size: 257 MB File system: ext2 … ---> ------------------------------------------------------------------------------ Welcome to SS-110 configuration page … ------------------------------------------------------------------------------ Select menu: 1. Network configuration … 6. Exit without saving 7. Exit and apply changes 8. Exit and reboot <Enter> Refresh ---> 7 Are you sure to save changes? (y/n): y Saving.. Configuration is saved successfully Are you sure to apply changes? (y/n): y Applying........ Configuration is applied successfully

  46. User Web Customization – CGI & Java pages (2/3) Compiling and Copying files • Make working directory such as /mnt/flash/work • Copy cgi source file (e.g. ex.c) into the working directory • Compile *.c file with the option of “–L/mnt/flash/lib” (Library path) • Copy *.cgi binary file to /usr2/cgi-bin/ directory • Copy index.html that has CGI link in it to /usr2/usrweb/ directory

  47. User Web Customization – CGI & Java pages (3/3) Sample CGI Source file and Output root@192.168.0.15:/mnt/flash/work# cat ex.c #include <stdio.h> #include <stdlib.h> #include <string.h> main(int argc, int *argv[]) { printf("Content-type: text/html\n\n"); printf("<html>"); printf("<body bgcolor=\"#0000C0\">"); printf("<b><font color=\"#FF0000\">This is a sample CGI page</font></b>\ n"); printf("</body>"); printf("</html>\n"); fflush(stdout); } root@192.168.0.15:/mnt/flash/work# gcc -o ex.cgi ex.c -L/mnt/flash/lib root@192.168.0.15:/mnt/flash/work# cp ex.cgi /usr2/cgi-bin/ root@192.168.0.15:/mnt/flash/work#

  48. Users just need to write filter application only to customize serial port application rather than writing whole source code Typical situation for serial application customization: Add/remove protocol header Periodically check serial device Serial Filter Application (1/4) SS Serial Filter Structure

  49. Serial Filter Application (2/4) Sample file • Location = /mnt/flash/sample/filter • periodic_filter.c • Periodic query of the serial device application might start from here • empty_filter.c • Do nothing. Adding/removing header application might start from here

  50. Serial Filter Application (3/4) How to • Log into the SS (Telnet or SSH) • Copy sample file from SDK to working directory (e.g. /mnt/flash/work) • Compile source file (Be careful with compile options)gcc -o myfilter myfilter.c -L/mnt/flash/lib –lpthread • Copy compiled binary to /usr2 directory • Specify filter application and arguments using configuration web or menu configuration

More Related