1 / 45

The Wax Try-in

This article discusses the process of wax try-in for dental prosthetics, focusing on occlusal relationships, appearance, phonetics, and patient comfort. It provides a step-by-step guide for the two try-in appointments and highlights the importance of accuracy, confirmation, and adjustments during the process.

jmcneal
Download Presentation

The Wax Try-in

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The Wax Try-in

  2. Wax Try-in Verify & Change: • Occlusal relationships • Appearance • Phonetics • Patient comfort

  3. Two Try-in Appointments • Initial wax try-in • Verify centric, protrusive • Confirm esthetics, phonetics • Final wax try-in • Ensure balanced (if applicable), wax-up complete

  4. Initial Wax Try-in • Verify: • Accuracy of maxillomandibular records • Appearance of anterior teeth • Changes will almost always need to be made • Technician has not finalized balance at this stage Canted Occlusal Plane Midlines Off

  5. Centric Position Contacts • Check first – Affects everything else • Check with articulating paper • Stabilize mandibular denture • New centric relation record • Minimal amount recording medium

  6. Minimal Registration Material • Improves record accuracy • Less resistance during closure • Reduces chance of deflection when checking record ✔ ✘ ✘ ✔

  7. Small Amount of Registration Material • Opposing cusps should not penetrate • Cuspalindentations improve accuracy compared to flat wax rim

  8. Confirm Accuracy of Mounting • Ensure record is fully set • Loosen articulator centric lock • Seat both record bases & interdigitate teeth into record

  9. Accurate Mounting • Teeth interdigitate perfectly • No space around the cusps • Condylar ball should contact fossae wall • If either criteria not met, remake record Doesn’t fit Fits well

  10. Second Record Used to Confirm Inaccurate Mounting • Mandibular cast removed from mounting ring • Mounting plaster ground thinner • Cast remounted, using the new record

  11. Don’t Overlook Problems • Difficult/impossible to change after processing • May require removal, resetting & re-processing • Procedures more costly & time consuming

  12. Verify Occlusal Vertical Dimension & Interocclusal Distance • Same techniques used previously • Critical to measure & feel 2-4 mm of interocclusal distance • No tooth contacts during closest speaking space

  13. Changing OVD • Effects: • Occlusion • Facial esthetics

  14. As mandible moves downward (opening or increasing OVD) • Incisal edge moves back • Increases overjet • Helpful in Angles Class III • Problem in Angles Class II

  15. Vertical Dimension Alterations • May require resetting of all teeth in at least one arch • Extensive changes made by lab • Height of anterior & posterior teeth must be in harmony

  16. Vertical Dimension Alterations • If only posterior teeth are changed • Undesired effect on: • Overbite relationships • Esthetics • Balancing contacts • Assess how changes will affect overall appearance

  17. Tooth Position • Canine Relationship • Most critical tooth relationship • If half tooth offset not present, diastema required between anterior & posterior teeth Insufficient Offset

  18. Canine Relationship • Problems encountered when: • Jaw size discrepancies • Malocclusions • Improper contouring of occlusal rims

  19. Eliminating a Canine Discrepancy • Reducing or increasing overjet • Reducing or increasing arch circumference of one or both occlusion rims • Altering vertical dimension Reducing overjet in of 1st/4th quadrants to improve canine relationship & reduce lisping

  20. Eliminating a Canine Discrepancy • Bodily moving teeth facially/lingually • Changing axial inclination (tilting)

  21. Prior to resetting teeth, the dentist should determine how to eliminate a canine discrepancy

  22. Excursive Contacts • Evaluate visually and with articulating paper • Intraoral/articulator discrepancies: • Remake protrusive record • Check/reset condylar inclination

  23. Verify Comfort: Tongue Space Ask patient to comment on: • Comfort • Ability to speak

  24. Esthetics Check: • Amount of incisal display • Harmony of the maxillary teeth with the smile line • Accuracy of the midline • Angle of the occlusal plane Initial setup - teeth too long. 2nd quadrant set higher to assess position for reset

  25. Esthetics Check • Proper soft tissue profile, contours • Lip support • Display of the vermilion border • Correct nasolabial angle

  26. Esthetics • Ask patients for their opinion prior to voicing yours • Avoids biasing the patient • Family or friend may be helpful

  27. Make Changes Technician Can’t AssessEsthetic ProblemsOther changes can be prescribed for technician Move and assess quadrant 2, technician matches reset with remaining teeth

  28. Esthetics If you or the patient have reservations about appearance • Resolve prior to final processing • Never attempt to persuade a patient out of a concern • Problems will be yours later, if patient does not like appearance

  29. Incisors too long

  30. Phonetics • Easier to assess • Teeth have replaced bulky rims • Crowded tongue space can adversely affect phonetics

  31. Lisping • Non-uniform overjet of anterior teeth • Diastemas between teeth • Palatal contours • Diamond-shaped openings between incisors

  32. Phonetics • If have not worn dentures for extended period or • Dramatic changes (Contour, Tooth Position, OVD) Allow the patient to read a OUT LOUD for 5-10 minutes to assess phonetics and comfort

  33. Sibilant Sounds • ‘S’, ‘Z’‘T’‘CH’‘SH’: ‘Sixty-six’, ‘Mississippi’) • Incisors should approach end to end relationship

  34. Fricative Sounds • F, V, ‘Fifty-Five’ • Ask patient to count from ‘50 to 60’ • Maxillary incisal edges should just touch wet line of the lower lip

  35. Denture base contours • Affect phonetics, comfort and retention • Should be slightly concave, NOT convex in shape Convex Concave

  36. Denture Base Contours Ensure that denture base is not unduly thick or thin • Excess bulk will impair comfort • Feel between index finger & thumb • Base that is too thin will be weakened • Should not be able to see through

  37. Patient Input Use open ended questions “How do you like the appearance?”, rather than “Don’t the new dentures look great?”

  38. Patient Input • If the patient sounds unconvinced • Ask more questions • Do not rush this step to save time!

  39. Final Wax Try-in • Confirm that prescribed changes are acceptable • Making further alterations if required • Diastemas should be closed • Phonetics should be acceptable

  40. Laboratory Prescription Request: • Processing, finishing & polishing • Laboratory remount of the dentures • Adjustment of occlusion to compensate for processing changes

  41. Laboratory Prescription • Request: • Fabrication of remount index & casts, (used at delivery) • Refinement of wax-up • Special requests • Send remount jig to laboratory

  42. Importance of Wax Try-in • Chance to change setup • If not willing to change aspects of setup, appointment is a waste of time • An opportunity to improve the final result

  43. Checklist • Centric record verified with recording medium • Vertical dimension verified: • a. 2-3 mm between lip closure and teeth touching • b. Phonetics tests ("50`s-60`s" or "Mississippi") - space between rims • c. Lips appear and feel unstrained • Tooth form, arrangement & shade verified • Phonetics verified ("S","F" and "M" sounds) • Balanced occlusion, anterior teeth only grazing in protrusion

  44. Videos • Analyzing & Adjusting Centric Contacts • Adjust Lateral Contacts • Adjust Protrusive Contacts

  45. Denture Tooth Setup Project • Set Posterior Teeth • Check Centric contacts • Ensure even on all posterior teeth • Check visually from facial and tongue space • Move in wax if far from contact • Adjust with bur if minor prematurities • Ensure sufficient overjet • Begin checking lateral & protrusive contacts

More Related