1 / 20

Chapter 42

Chapter 42. Building Codes and Commercial Design. Introduction. Commercial drafting depends more on building codes This means working with the International Building Code or a local code based on IBC You must be able to properly use the code governing your area. Exploring Building Codes.

Download Presentation

Chapter 42

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 42 Building Codes and Commercial Design

  2. Introduction • Commercial drafting depends more on building codes • This means working with the International Building Code or a local code based on IBC • You must be able to properly use the code governing your area

  3. Exploring Building Codes • International Building Code (IBC) • Published by the International Code Council (ICC) • Merger between: • Uniform Building Code (UBC) • National Building Code (NBC) • Building Officials and Code Administrators International (BOCA) • Standard Building Code (SBC)

  4. Exploring Building Codes (cont’d.) • International Building Code (cont’d) • Part of a family of codes • Structural • Plumbing • Mechanical • Fire • Residential • Several other International Codes published by the ICC (e.g., fuel gas, sewage disposal, etc.)

  5. Exploring Building Codes (cont’d.) • Building codes influence every aspect of a construction project • Code book should be available and referred to frequently • Check with building department to determine the code for drafting project

  6. Exploring Building Codes (cont’d.) • Exploring the IBC • Each code consists of related books to regulate: • Design and structural • Electrical and energy • Fire • Mechanical • Plumbing • Zoning • Construction types are numbered from I to V

  7. Exploring Building Codes (cont’d.) • Exploring the IBC (cont’d.) • Additional considerations • Safety requirements • Building systems • Building materials

  8. Determining Design Categories • Occupancy groups • Specifies by whom or how the structure will be used • Ten classifications, broken into sub classifications • Group R occupancy categories considerations

  9. Design Categories (cont’d.) • Type of construction • Five general types of construction • Represented by the Roman numerals I through V • Building area • Basic square-foot sizes • May be altered depending on construction techniques

  10. Design Categories (cont’d.) • Determining height • Occupancy and type of construction will determine maximum height • Building location and size • Impacted by zoning and the structures use • Increasing space between buildings lessens chance of additional fire damage and provides greater firefighting equipment access

  11. Design Categories (cont’d.) • Increasing the allowable floor area • Wood frames cannot be as large or tall as those built of noncombustible materials • Fire protected structural members may be larger and taller • Occupancy load • Determined by a ratio of room area to code specified area per person

  12. Design Categories (cont’d.) • Exits • Exit paths • Mostly determined by number of occupants • Determining exits • Refer to text for calculations • Exit locations • If more than one exit is required, IBC requires at least two exits be separated by one-half of the diagonal of the area served

  13. Design Categories (cont’d.) • Accessibility requirements for type R occupancies • Type of living units based on level of accessibility provided • Type A or B

  14. Design Categories (cont’d.) • Accessibility requirements for type R occupancies • Additional considerations: • Accessible routes • Operating controls • Doorways • Kitchens • Toilet and bathing facilities

  15. Using the Codes • Drafter must be aware of classifications • Many problems will need the code to solve • Requires knowledge of basic code limitations • Practice using tables in the text and similar tables of the code that govern your area

More Related