1 / 10

Installing the UV Lamp

Installing the UV Lamp. Safety. Shut down the machine completely by pushing the OFF button in the operation panel. On the UV system power cabinet, padlock the main isolator in the ‘OFF’ position. Installing the UV Lamp.

jcurran
Download Presentation

Installing the UV Lamp

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Installing the UV Lamp

  2. Safety • Shut down the machine completely by pushing the OFF button in the operation panel. • On the UV system power cabinet, padlock the main isolator in the ‘OFF’ position. Confidential

  3. Installing the UV Lamp • In order to hinge up the lamp head cover, you have to pull and rotate the locker pin on both sides. Confidential

  4. Installing the UV Lamp (Cont.) • Disconnect the air pressure to the machine, then open the shutter manually to gain access to the lamp socket. Confidential

  5. Installing the UV Lamp (Cont.) • Release the lamp retaining plates by unclipping the slide latches. Confidential

  6. Installing the UV Lamp (Cont.) • Do not touch the lamp, as skin acids will permanently mark the quartz sleeve. • It is recommended to wear cotton gloves or to cut the nylon package only on the edges as shown. Confidential

  7. Inserting the Lamp • Note: This procedure must be preformed by two people. • Connect the lamp to its terminal. • Connect the yellow cable to the lamp terminal and secure it tightly. Confidential

  8. Inserting the Lamp (Cont.) • Placethe lamp at its location, as shown in the picture. Confidential

  9. Inserting the Lamp (Cont.) • Place the lamp retaining plates and secure the slide latches. • Verify that the lamp can move freely (a few millimeters to the sides) • Note: the lamp expands towards the sides during operation. Confidential

  10. Inserting the Lamp (Cont.) • Cut the rest of the nylon package. • Hinge down the lamp head cover. • Close the lockers pin. • Switch on the air and electrical supplies. • Check the shutter operation. Confidential

More Related