1 / 12

Why Data Conversion?

Why Data Conversion?. Real world is analog Mostly, communication and computation is digital Need a component to convert analog signals to digital (ADC) and convert the processed digital signal back to analog (DAC). Types of Data Converters. Niquist rate data converters Serial

jasia
Download Presentation

Why Data Conversion?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Why Data Conversion? • Real world is analog • Mostly, communication and computation is digital • Need a component to convert analog signals to digital (ADC) and convert the processed digital signal back to analog (DAC)

  2. Types of Data Converters • Niquist rate data converters • Serial • Successive approximation • Flash • Oversampling (Sigma-Delta) How is a data converter characterized ??? • Power consumption • Area consumption • Operating speed • Conversion time (delay) • Error (Linearity) • Noise performance • And many more….

  3. Ideal DAC/ADC characteristics ADC DAC

  4. Integral Non-Linearity Error INL: Deviation of the code transition from its ideal location

  5. Differential Non-Linearity Error DNL: Deviation of the code width from 1 LSB

  6. Full Scale Error Full scale error: Difference between the actual value that triggers the transition to full-scale and the ideal analog full-scale transition value

  7. Gain Error Gain error: Difference between the slope of an actual transfer function matches the slope of the ideal transfer function

  8. Noise Performance SNR (signal to noise ratio): Ratio of the fundamental signal to the noise spectrum. THD (total harmonic distortion): Ratio of the fundamental signal to the noise spectrum. SFDR (spurious free dynamic range): Ratio of the fundamental signal and the highest spurious in the spectrum SINAD (Signal-to-Noise And Distortion): combination of SNR and THD SINAD = 20 * log ([Fundamental] / SQRT (SUM (SQR([Noise + Harmonics])))) ENOB (Effective Number of Bits): (SINAD – 1.76) / 6.02

  9. More Information Preliminary http://www.maxim-ic.com/appnotes.cfm/appnote_number/641 Slightly Advanced http://inst.eecs.berkeley.edu/~ee247/fa05/lectures/L12_2_f05.pdf http://inst.eecs.berkeley.edu/~ee247/fa05/lectures/L11b_f05.pdf

More Related