1 / 32

Module 5 Semester I

CABLING LANs & WANs. Module 5 Semester I. Content. Cabling the LAN Cabling the WAN. Objectives. Identify characteristics of Ethernet networks. Identify straight-through, crossover, and rollover cables.

Download Presentation

Module 5 Semester I

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CABLING LANs & WANs Module 5Semester I

  2. Content • Cabling the LAN • Cabling the WAN

  3. Objectives • Identify characteristics of Ethernet networks. • Identify straight-through, crossover, and rollover cables. • Describe the function, advantages, and disadvantages of repeaters, hubs, bridges, switches, and wireless network components. • Describe the function of peer-to-peer networks. • Describe the function, advantages, and disadvantages of client-server networks. • Describe and differentiate between serial, Integrated Services Digital Network (ISDN), digital subscriber line (DSL), and cable modem WAN connections. • Identify router serial ports, cables, and connectors. • Identify and describe the placement of equipment used in various WAN configurations.

  4. Cabling the LANThe Physical Layer

  5. Networking MediaCarry flow of information Media Characteristics: • Cable length • Cost • Ease of installation • Susceptibility to interference • Media Types • Coaxial • Fiber Optic • Space • Category 5 unshielded twisted-pair cable (Cat 5 UTP) A subset of physical layer implementations for Ethernet LANs

  6. Ethernet Media • Ethernet technologies can be used in a campus network in several different ways: • 10 Mbps at the user level to provide good performance. • 100 Mbps for clients or servers that require more bandwidth. • Fast or Gigabit Ethernet between backbone devices.

  7. Media Connectors

  8. This is the Jack This is the Connector RJ-45 connectors

  9. 568B pin assignments – straight cable Transmit Data Tip +ve Transmit Data Ring -ve Receive Data Ring -ve Receive Data Tip +ve

  10. Cross Over cable – pin assignments 568B

  11. Interconnecting Devices • Use straight-through cables for… • Switch to router • Switch to PC or server • Hub to PC or server • Use roll-over cables to… • Connect a terminal to a console port • Use crossover cables for… • Switch to switch • Switch to hub • Hub to hub • Router to router • PC to PC • Router to PC

  12. LAN DevicesRepeaters, Hubs, Bridges, Switches

  13. Repeaters - Hubs Repeaters • A repeater regenerates and retimes network signals at the bit level to allow them to travel a longer distance • 5-4-3 Rule for 10-Mbps Ethernet should be used to limit latency • Too much latency on the LAN increases the number of latecollisions and makes the LAN less efficient Hubs • Hubs are actually multiport repeaters • Change the network topology from a linear bus to a star • Three basic types: • Passive – no boost, no clean and no power • Active - needs power to amplify the incoming signal • Intelligent - microprocessor chip and diagnostic capabilities

  14. Bridges & Switches Bridges Switches • Bridges and switches operate at the Data Link layer. • Destination MAC address is looked up in the bridge table to determine whether to filter, flood, or copy the frame onto another segment. • A switch has many ports with many network segments connected to them. • A switch chooses the port to which the destination device is connected. • Alleviates congestion in LANs by reducing the size of collision domains, reducing traffic and increasing bandwidth. • Two basic operations: • Switching data frames. • Build and maintain switching tables and search for loops. • Switches operate at much higher speeds than bridges and can support new functionality, such as virtual LANs.

  15. Wireless • Much less cabling • RF, IR, laser, satellite, microwaves • The only cabling can be to the Access Points • The transmitter converts source data to EM waves • The receiver converts waves back into data • All devices in WLAN must have Wireless NICs IR weaknesses: • ‘Line of sight’ limitation (newer technologies combat this) • Signal weakening or obstruction by people or humidity RF technology works between rooms or even buildings RF weaknesses: • Single frequency is subject to outside interference and obstructions • Single frequency is easily monitored by others making it insecure FHSS and DSSS are Spread Spectrum technologies which add security and immunity to noise by using multiple frequencies

  16. NIC The function of a NIC is to connect a host device to the network medium The NIC is also referred to as a network adapter NICs are considered Layer 2 devices because each NIC carries a unique code called a MAC address

  17. Network Environments

  18. Peer-to-Peer In a peer-to-peer network • networked computers act as equal partners, or peers • individual users control their own resources Peer-to-peer networks are relatively easy to install and operate A peer-to-peer network works well with 10 or fewer computers peer-to-peer networks do not scale well, their efficiency decreases rapidly as the number of computers on the network increases Security is difficult to maintain

  19. Client/Server In a client/server arrangement, network services are located on a dedicated computer called a server The server is a central computer that is continuously available to respond to requests from clients for file, print, and application services Servers are designed to handle requests from many clients simultaneously The aggregation of resources on server systems brings greater security, simpler access and coordinated control, the server introduces a single point of failure

  20. Peer-to-Peer vs. Client/ServerAdvantages

  21. Peer-to-Peer vs. Client/ServerDisadvantages

  22. WAN Connections Serial connections are used to support WAN services such as dedicated leased lines that run Point-to-Point Protocol (PPP) or Frame Relay

  23. WAN WANs use serial transmission This is a process by which bits of data are sent over a single channel This process provides reliable long distance communication and the use of a specific electromagnetic or optical frequency range Signals transmitted over voice grade telephone lines use 3 kilohertz (kHz).

  24. WAN Serial connections are used to support WAN services such as dedicated leased lines that run Point-to-Point Protocol (PPP) or Frame Relay ISDN offers dial-on-demand connections or dial backup services. • ISDN Basic Rate Interface (BRI) is composed of: Two 64 kbps bearer channels (B channels) for data One delta channel (D channel) at 16 kbps used for signaling and other link-management tasks • PPP is typically used to carry data over the B channels.

  25. Router Connections Cisco router physical connectivity is provided by serial connections: • The first type of serial connections is a 60-pin connector • The second is a more compact ‘smart serial’ connector The provider connector will vary depending on the type of service equipment

  26. DTE/DCE When the connection is made directly to a service provider, or a device that provides signal clocking such as a channel/data service unit (CSU/DSU), the router will be a data terminal equipment (DTE) and use a DTE serial cable. When the local router is required to provide the clocking rate it will use a data communications equipment (DCE) cable

  27. Router Connection Points

  28. Managing Routers To initially configure the Cisco device, a management connection must be directly connected to the device The console port allows monitoring and configuration of a Cisco hub, switch, or router The cable used between a terminal and a console port is a rollover cable also known as a console cable

  29. Console Connection

  30. http://www.webopedia.com ……. Continue next class, thank you

  31. LABS

  32. LABS 5.1.5 RJ-45 jack punch down 5.1.7 Hub & NIC purchase 5.1.10 Purchasing LAN Switches 5.1.12 Building a Peer to Peer network 5.1.13a Building a HUB based network 5.1.13b Building a Switch based network

More Related