1 / 7

Yellow blobs are not of interest – these are test areas

coverslip. Area of final dna crystal application. Yellow blobs are not of interest – these are test areas. 500um quartz wafer with nominal 200nm deep aluminum lines – these are aligned with the flat at left and have width of 38um and pitch of 40um with 2um gap .

jalen
Download Presentation

Yellow blobs are not of interest – these are test areas

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. coverslip Area of final dna crystal application Yellow blobs are not of interest – these are test areas 500um quartz wafer with nominal 200nm deep aluminum lines – these are aligned with the flat at left and have width of 38um and pitch of 40um with 2um gap red+black sharpie marks indicate center of location of area of interest

  2. Grating was pre-warmed to 37 deg. C. 100uL of 200uM pre-cursor dna(5’-GGA CAG ATG GGA-3’) in buffer solution was applied near center of grating. (dna+buffer was pre-heated to 37 deg C for 2 hours). Grating was allowed to rest at room temperature in a sealed chamber with buffer solution in bottom of chamber to provide humid atmosphere for growth. About 16 hours later, the drop was wicked away and a glass coverslip was placed over site of crystal growth. buffer composition: 120mM magnesium formatedihydrate, 50mM LiCl and 10% w/w 2-methyl-2-4-pentadiol These are dna crystals from the center of wafer – this is the region of interest

  3. line analysis of afm scan of Al grating as recieved from WSU, groove depth measures about 160nm

  4. transmitted light images of grating with (right) and without (left) dna treatment area exposed overnight to 200uM dna in growth buffer - blue arrows indicate some of the visible crystals area exposed overnight to growth buffer only

  5. top lit optical images of grating with (bottom) and without (top) dna treatment -image at top was treated with buffer only, no dna -the crystals in the bottom image appear to grow largely from the grooves in the grating

  6. line analysis of afm scan of Al grating as measured outsidedna application area, groove depth measured along line as shown depths measured 165nm and 166nm line analysis of afm scan of Al grating as measured insidedna application area, groove depth measured along line as shown-the difference in groove depth is likely due to dna crystal accumulation in bottom of grooves - also visible are apparent crystals growing from sides of the groove depths measured 102nm and 128nm

More Related