1 / 28

IDENTIFYING AND SELECTING PLUMBING MATERIALS AND FITTINGS

IDENTIFYING AND SELECTING PLUMBING MATERIALS AND FITTINGS. Original Power Point Created by Von Peavy. Modified by the Georgia Agriculture Education Curriculum Office June 2002. TYPES OF MATERIALS. PLASTIC COPPER TUBING MALLEABLE IRON PIPE CASTE IRON SOIL PIPE VITRIFIED CLAY PIPE.

jalen
Download Presentation

IDENTIFYING AND SELECTING PLUMBING MATERIALS AND FITTINGS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. IDENTIFYING AND SELECTING PLUMBING MATERIALS AND FITTINGS Original Power Point Created by Von Peavy Modified by the Georgia Agriculture Education Curriculum Office June 2002

  2. TYPES OF MATERIALS • PLASTIC • COPPER TUBING • MALLEABLE IRON PIPE • CASTE IRON SOIL PIPE • VITRIFIED CLAY PIPE

  3. PLASTIC • Characteristics: • Low Initial Cost • Ease Of Assembly • Lightweight • Corrosion Resistant • Low friction loss • Fire resistant • Maintenance free

  4. TYPES OF PLASTIC • ABS (Acrylonitrite-Butediene-Styrene) • PVC (Polyvinyl Chloride) • CPVC (Chlorinated Polyvinyl Chloride) • PE (Polyethelyne) • PB (Poybutylene)

  5. ABS (Acrylonitrite-Butediene-Styrene) • Uses: • Sanitary Drainage • Vent Piping • Storm Water Drainage • Size Availability: • 11/4- 6 inch diameter • 10 ft or 20 ft. lengths

  6. PVC (Polyvinyl Chloride) • Uses: • Cold water lines • Drians • Irrigation • Size Availability: • 1/2” to 4” diameter • 10 and 20 ft. lengths

  7. CPVC (Chlorinated Polyvinyl Chloride) • Uses: • Cold and hot water lines • High temperature and pressure lines • Size Availability: • 1/2” ND 3/4” diameter • 10 ft. lengths

  8. PE ( Polyethelyne) • Uses: • Underground water service • Size Availability: • 3/4 to 2” diameter • 100 ft. coils

  9. COPPER PIPE • Characteristics: • Resists corrosion • Accepted by virtually every plumbing code • Will not burn or support combustion and decompose to toxic gases • Easy to join • Easily formable • Lightweight • Economical

  10. K (Green) L (Blue) M (Red) DWV (Yellow) Types K, L, M, DWV and Medical Gas tube are designated by ASTM standard sizes. Each type represents a series of sizes with different wall thicknesses. Type K tube has thicker walls than Type L tube, and Type L walls are thicker than Type M, for any given diameter. All inside diameters depend on tube size and wall thickness Copper Pipe - Used to carry water to fixtures and appliances. Use Type M for most residential work. Type L is required if the pipe is buried TYPES OF COPPER PIPE

  11. TYPE K (GREEN) • Uses: • Domestic water • Service and distribution • Fire protection • Solar • Fuel/fuel oil • HVAC • Available Sizes: • Straight lengths: ¼’’ to 8’’ 20 ft. • Coils: ¼’’ to 1’’ - 100 ft.

  12. TYPE L (Blue) • Uses: • Domestic water • Service and distribution • Fire protection • Solar • Fuel/fuel oil • Liquefied petroleum (LP) gas • HVAC • Snow melting • Size Availability: • Straight lengths: ¼’’ to 8’’ 20 ft. • Coils: ¼’’ to 1’’ – 100 ft.

  13. TYPE M (Red) • USES: • Domestic water • Service and distribution • Fire protection • Solar • Fuel/fuel oil • Liquefied petroleum (LP) gas • HVAC • Snow melting • Size Availability: • Straight lengths: ¼’’ to 12’’- 20 ft • No coils

  14. DMV (Yellow) • Uses: • Drain • Waste • Vent • Solar • HVAC • Size Availability: • Straight lengths: 1¼’’ to 8’’- 20 ft. • No coils

  15. MALLEABLE IRON PIPE • Characteristics: • strong • susceptible to rust and corrosion • difficult to install • Uses: • drain pipes • hot and cold supply • Size Availability: • 1/2” to 12” diameter • 21’ lengths- cut pipe available

  16. CASTE IRON SOIL PIPE • CHARACTERISTICS • Versatile • Adaptable for use in all types of building • Low-Cost Installation. • Cast iron soil pipe can be preassembled • Product readily available • USES • sanitary and storm drain • waste and vent piping applications • SIZE AVAILABILITY • 11/2” to 12” diameter • 5’ AND 10’ lengths

  17. VITRIFIED CLAY PIPE • ADVANTAGES OF VITRIFIED CLAY PIPE • CHARACTERISTICS: • .Life expectancy: over 100 years • .Chemically inert: resistant to attack from solvents, acids, alkalis, gases, etc. • Low friction coefficient. • Structural integrity: inherent load bearing • Resistant to root penetration and leakage. • Abrasion resistance: • Handling: easy to handle and install. • Economical • USES • sanitary and storm drain • waste and vent piping applications • SIZE AVAILABILITY: • 11/2” to 12” diameter • 5’ AND 10’ lengths

  18. COMMON PIPE FITTINGS

  19. ELBOWS STREET ELL 45 DEGREE 90 DEGREE

  20. COUPLINGS STAIGHT COUPLING REDUCING COUPLING

  21. ADAPTERS FEMALE ADAPTER MALE ADAPTER BUSHING

  22. UNION

  23. TEE

  24. WYE

  25. CROSS

  26. NIPPLE

  27. CAPS AND PLUGS PLUG CAP

  28. IDENTIFYING AND SELECTING PLUMBING MATERIALS AND FITTINGSA VGP PRODUCTION THE END

More Related