1 / 9

HFT development

HFT development. MimoStar2 based telescope. Outline. Our goals Setup Current status Problems to solve What next …. Our goals:. test functionality of a prototype MIMOSTAR2 detector in the environment at STAR: Charged particle environment near the interaction region in STAR.

irene-ramsey
Download Presentation

HFT development

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HFT development MimoStar2 based telescope

  2. Outline • Our goals • Setup • Current status • Problems to solve • What next …

  3. Our goals: test functionality of a prototype MIMOSTAR2 detector in the environment at STAR: • Charged particle environment near the interaction region in STAR. • Performance of our cluster finding algorithm. • Performance of the MIMOSTAR2 sensors. • Functionality of our tested interfaces to the other STAR subsystems. • Performance of our hardware / firmware as a system. • The noise environment in the area in which we expect to put the final HFT.

  4. Telescope setup - components MimoStar2 chips on kapton cables MOTHER BOARD DAUGHTER CARD Control PC (Win) STRATIX Acquisition Server (Linux) RORC SIU

  5. analog mxfirst Power, clk, sync, jtag TELESCOPE HEAD Telescope setup 3 MimoStar2 chips as TELESCOPE Control, readout

  6. East Pole Tip installation H. Wieman

  7. Current Status • Electronics Hardware / Hardware – All required PCBs, cables, computers, etc are in hand. We are currently working on some problems involving noise in our electronics setup. We hope to resolve this shortly and assemble and test the telescope setup in a beam run at the ALS at LBL before moving the system to BNL for the beam test. • Firmware – The required functionality required for the test has been implemented and tested in the ways possible before a working set of detectors is used. • Integration – The insertion tube and electronics box are in place at BNL as is the cooling system, DAQ and control PCs. Final assembly and testing of the telescope is required before we can do further testing.

  8. Problems to solve - distortions In the configuration with a fully loaded kapton cable we see some distortions which appear in the middle of the frame

  9. The noise doesn’t come from the DAQ system (~1 ADC) Problems to solve - noise IPHC – results from Strasbourg Mezz. Full – chip bonded on a mezzanine card Mezz. Part – chip bonded on a mezzanine card with part of the bonds (like for a flex cable) Flex1 – only on flex cable in the hft system Flex2 – two chips in parallel in the hft system

More Related