Download
1 / 12
130 likes | 295 Views
Introduction to Engineering Technology Seventh Edition Robert J. Pond & Jeffery L. Rankinen. Chapter 7 The Technical Laboratory. Introduction. This chapter is intended to make you aware of how to work safely and effectively in the laboratory and report your findings clearly and efficiently.
E N D
Introduction to Engineering TechnologySeventh EditionRobert J. Pond & Jeffery L. Rankinen Chapter 7 The Technical Laboratory
Introduction This chapter is intended to make you aware of how to work safely and effectively in the laboratory and report your findings clearly and efficiently.
Laboratory Technician Be patient and methodical Pay attention to detail Plan and prepare Be accurate Communicate clearly and effectively
Scientific Method – Problem Solving State the problem Form the hypothesis Experiment and observe Interpret the data Arrive at the conclusion
Performing the Experiment Equipment specified Data sheets Group work Conclusions drawn
Data Collection and Calculating Results Scale Resolution – no better than one-half of the smallest division
Data Collection and Calculating Results Digital Meter Accuracy – specified as +/- (percent of reading + number of units in the least significant digit) Example: Stated accuracy: +/- (0.5 + 2) Scale reading of 1000 for Figure 7.10 1000*0.005+2 = +/- 7 volts
Reporting Outlining the written report Objective section Equipment section Theory section Procedure section Data section Calculation section Results section Conclusion section Preparing and submitting the report The report checklist Oral reporting Oral report checklist
