1 / 5

Tower 1 disconnected channels Tray MID 070 broken resistor

Tower 1 disconnected channels Tray MID 070 broken resistor. MRB Meeting – 17 February 2005. Tower 1: disconnected channels. Known MCMs issue (found in Tower A/B as well). No evident damage found in the pitch adapter @ optical inspection.

ilana
Download Presentation

Tower 1 disconnected channels Tray MID 070 broken resistor

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tower 1 disconnected channelsTray MID 070 broken resistor MRB Meeting – 17 February 2005

  2. Tower 1: disconnected channels • Known MCMs issue (found in Tower A/B as well). • No evident damage found in the pitch adapter @ optical inspection. • Those 4 layers account for ~80 disconnected channels (~170 overall in Tower 1 - 0.3 % of the total). • See http://glast.pi.infn.it/TrackerElectricalTests/Towers/Tower1/Tower1_disc_chans.xls for detailed time history. • Proposed disposition is use as is for tower 1.

  3. Tray MID 070: broken resistor • Description of nonconformance: • All the 64 channels of one Front-end chip always over threshold. • Relevant NCR: • Refer to NCR 385 major. • Impact: • 64 contiguous channels on one layer are lost. • Root cause: • Very likely due to a resistor on the MCM (R111) found to be broken during the optical inspection. • R111 is very close to one of the screws used to mount the MCM onto the tray closeout.

  4. Tray MID 070: broken resistor R111 Hole for PCB fixing screw Non flight MCM shown for reference in the pictures

  5. Tray MID 070: broken resistor • Proposed disposition: • Agree on a procedure for R111 replacement. • Use for Tower 2 after rework.

More Related