1 / 9

Cisco 1941W configuration Example

Cisco 1941W configuration Example. By Surendra B G TAC Engineer-Wireless, Cisco Systems. Agenda. Difference between 1941W and rest all ISR What is the special thing that we need to take care of while configuring 1941W . Configuration overview live demonstration.

huong
Download Presentation

Cisco 1941W configuration Example

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Cisco 1941W configuration Example By Surendra B G TAC Engineer-Wireless, Cisco Systems

  2. Agenda • Difference between 1941W and rest all ISR • What is the special thing that we need to take care of while configuring 1941W. • Configuration overview live demonstration. • Reference links and copy of the configuration.

  3. Differences!! • 1941W is one of the ISRs that we have, other are..857, 877, 861W, 881W, 891W, 1811 etc.. • The below link will provide some details as well.. http://www.cisco.com/cisco/web/psa/default.html?mode=prod

  4. Differences • ISRsother than1941W, layer 2 switchports are availableand inbuilt. • 861W/881W/891WSwitch ports and the “embedded” AP • 1941 W No switch ports, we need to buy the switch module and insert it in the slot.

  5. Diff • Datasheets for 861W, 881W, 891W and 1941W > 861W http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78_461543.html > 881W Http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78_459542_ps380_Products_Data_Sheet.html > 891W http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78-519930.html >1941W http://www.cisco.com/en/US/prod/collateral/routers/ps10538/data_sheet_c78_556319.html

  6. Configuration Overview • Topology Trunk Router ----------- Switch ------- PC 1 (Wired) 1941W 3750 | ))))) ((((( PC 2( Wireless) Router (GIG 0)------ (G 1/0/1) Switch ------ GIG 1/0/2 LAN Client | ---------- GIG 1/0/3 LAN Client

  7. Config Overview • Configure Router on a Stick between the Router and the Switch. • Configure Bridging on the Router to bridge L3int GIG 0 and IntVLANso that Wired and the Wireless can use the same DHCP pool. • Configure the DHCP pool on the Router. • Configure the Embedded AP for Multiple SSIDs. • Verify the network connectivity. • Test the Wired and Wireless connectivity

  8. Reference Docs • http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a00800949fd.shtml • http://www.cisco.com/en/US/products/hw/switches/ps5304/products_configuration_guide_chapter09186a00800f0a86.html • http://www.cisco.com/en/US/tech/tk389/tk815/technologies_tech_note09186a0080094663.shtml

  9. The End!! Thank you..  I Really appreciate your feedback!! Regards Surendra B.G

More Related