1 / 6

HCNP-DCF-BFDO H12-425-ENU practice exam questions

Prepare for your HCNP-DCF-BFDO H12-425-ENU exam? Fast way to get your Build Facility Deployment Optimization certification easily. Know the H12-425-ENU exam details from the exam page directly. https://www.dumpsbase.com/h12-425-enu.html

huaweidumpsbase
Download Presentation

HCNP-DCF-BFDO H12-425-ENU practice exam questions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. https://www.dumpsbase.com/h12-425-enu.html Huawei H12-425-ENU Dumps Questions Full Version: V8.02 with 237 Q&AS View Huawei H12-425-ENU Dumps Questions Now! 1 / 6

  2. https://www.dumpsbase.com/h12-425-enu.html 1. In NetEco's report management, which types of periodic tasks are there? (Multiple choice) A. Times B. Daily C. Weekly D. Monthly report Answer: ABCD 2. Which of the following is supported by the AI/DI port on the access control actuator? A. IC card reader B. Fingerprint reader C. Open the button D. Electronic magnetic lock Answer: C 3. When the ECC800 detects that the connection signal to the device is interrupted, a communication interruption alarm is generated. What are the possible reasons? (Multiple choice) A. Power supply is not normal B. Cable connection is loose C. Poor cable contact D. Equipment failure Answer: ABCD 4. During the use of the battery pack, the appearance is normal, but there is no current during charging, and the voltage drop is zero at the moment of discharge, and it cannot be discharged. What could be happened in the following? A. Breaking the battery pack B. Sulfation C. backward battery D. Battery leakage Answer: A 5. When the UPS2000-G shuts down the stand-alone system, which one of the following needs to be operated? A. Continuously perform 2 “shutdown operations” on the machine B. Just perform a “shutdown operation” on the machine. 2 / 6

  3. https://www.dumpsbase.com/h12-425-enu.html C. Disconnect the input directly from the machine D. “Shutdown operation” for all UPS in the system Answer: A 6. Before the UPS5000 is powered on, it is necessary to check that the UPS input switch, bypass switch, output switch, maintenance bypass switch, battery open) have all been placed in the "OFF" state. A. True B. False Answer: A 7. In the water side natural cooling scheme, cooling water can be directly supplied from the cooling tower to the air conditioner to complete the cooling. A. True B. False Answer: A 8. Can a sunroof actuator drive up to several sunroof electromagnetic locks at the same time? A. 2 B. 4 C. 6 D. 8 Answer: C 9. Which of the following is the correct procedure for powering up the UPS5000? A. Close the main road and bypass input switch -> Inverter start -> Set parameters, check system status -> Close battery switch -> Open load B. Set parameters, check system status -> Close main and bypass input switch -> Inverter start -> Close battery switch -> Open load C. Close the main circuit and bypass input switch -> set parameters, check system status -> close battery switch -> inverter start -> open load D. Close the main road and bypass input switch -> set parameters, check system status -> inverter start -> close battery switch -> open load Answer: D 10. The FusionModule1000B series solution can meet the Tier4 power supply requirements when using the 2N power supply and distribution system. A. True B. False Answer: B 3 / 6

  4. https://www.dumpsbase.com/h12-425-enu.html 11. When the integrated UPS is wired, if the input phase sequence is wrong, the machine will not work. A. True B. False Answer: A 12. When installing the UPS5000-E, there should be a certain distance between the back and the top to ensure ventilation and heat dissipation. A. True B. False Answer: A 13. When installing the UPS battery, the installation tool does not need to be insulated because the load is not charged. A. True B. False Answer: B 14. Which is not a routine maintenance item of the ECC800 power module? A. Check if the power indicator is normal. B. Check the ECC800 module fan C. Check if the power wiring is loose D. Create a micro-module plan view Answer: D 15. What is the terminal voltage of the battery in the open state? A. Rated voltage B. Discharge voltage C. Open circuit voltage D. Actual voltage Answer: C 16. The cabinet collector cannot be used for environmental data collection of IT cabinets. A. True B. False Answer: B 17. Which humidifier is used by the NetCol 8000-A? A. Electrode humidifier 4 / 6

  5. https://www.dumpsbase.com/h12-425-enu.html B. Infrared humidifier C. Wet film humidifier D. High pressure micro-mist humidifier Answer: B 18. Which of the following options is a natural cooling system? A. Direct ventilation air conditioning system B. Water-cooled cold air conditioning system C. Water-cooled cold water air conditioning system D. Air-cooled direct expansion air conditioning system Answer: A 19. You can view the camera's name, code, IP address, model, status, and more in NetEco's Video menu. A. True B. False Answer: A 20. Which of the following supports the UPS5000-E-400K-FM input line voltage? (Multiple choice) A. 220V B. 380V C. 400V D. 415V Answer: BCD DumpsBase Promotion Online 5 / 6

  6. https://www.dumpsbase.com/h12-425-enu.html More exams promotion could get from promotion page. 6 / 6 Powered by TCPDF (www.tcpdf.org)

More Related