1 / 28

Gauge blocks

Gauge blocks. Slip gauges (gauge blocks). Classification : based on their guaranteed accuracy, they are classified as : AA Master Slip Gauge. Has accuracy of +- 2 microns per meter. A Reference Slip Gauge. Has accuracy of +- 4 microns per meter.

hthoreson
Download Presentation

Gauge blocks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Gauge blocks

  2. Slip gauges (gauge blocks) Classification : based on their guaranteed accuracy, they are classified as : • AA Master Slip Gauge. Has accuracy of +- 2 microns per meter. • A Reference Slip Gauge. Has accuracy of +- 4 microns per meter. • B Working Slip Gauge. Has accuracy of +- 8 microns per meter.

  3. Grades of slip gauges : based on their guaranteed accuracy, they are classified as • 0 Grade. Used for inspection. • 00Grade. Used as a standard in the standard room only. • Calibration Grade. Has actual size for calibration. • 2 Grade. Workshop grade for machine tools …etc. • 1 Grade. For more precise work such as with sine bars.

  4. Sets of gauge blocks :They are available in different sets for different units Metric and English:

  5. Sets of gauge blocks :They are available in different sets for different units Metric and English:

  6. Sets of gauge blocks :They are available in different sets for different units Metric and English:

  7. Protecting Gauge Blocks: Another two gauges are added which are made extra wear resistant to reduce wear during inspection. They are called “Protector Gauge Blocks”. Usually have dimensions of 1mm, 1.5mm, 2mm or 2.5mm. They are marked with letter “P” on its measuring faces.

  8. Selecting and building up of blocks To build up the blocks to the required length follow these steps : (1) Note down the required dimension, (2) Deduct from it the size of two protecting blocks, (3) Add blocks that eliminates the least digit of the number, (4) Continue till you reach zero.

  9. Accuracy is affected by : (1) Dimensional instability of material, (2) Wear during operation or use, (3) Damage during storage and handling, (4) Change in parallelism.

  10. To reduce errors and improve accuracy : (1) Repeated and periodical inspection and calibration, (2) Select the least number of gauge blocks for a given or required size (this helps reducing accumulative errors).

  11. Example: List the slips to be wrung together to produce an overall dimension of 92.357mm using two protective gauge blocks of 2.5mm size. • Solution: • (1) Original size = 92.357 • (2) Deduct two protective slip gauges = 05.000 • Remainder = 87.357 • (3) Add block to eliminate least digit = 01.007 • Remainder = 86.350

  12. (4) Repeat step No. (3) = 01.050 • Remainder = 85.300 • (5) Repeat step No. (3) = 01.300 • Remainder = 84.000 • (6) Reduce to nearest big number = 09.000 • Remainder = 75.000 • (7) Add one block of 75.000mm = 75.000 • Remainder = 00.000

  13. How to wring Blocks together • When wringing blocks together, take care not to damage them. The correct sequence of movement to wring blocks together, illustrated as follows : • 1. Clean the blocks with a clean, soft cloth. • 2. Wipe each of the contacting surfaces on the clean palm of the hand or on the wrist. This procedure removes any dust particles left by the cloth and also applies a light film of oil.

  14. 3. Place the end of one block over the end of another block. • 4. While applying pressure on the two blocks, slide one block over the other. NOTE: If the blocks do not adhere to each other, it is generally because the blocks have not been thoroughly cleaned

  15. Gauge blocks by johansson, a sweedish deligate to Mauser factory in Germany in 1985 He devised a techniques to produce any length from a build up of individual Fixed Master guages. The stacking is possible by a mechanised lapping process to the surface of the masters.

  16. Block gauge set

  17. The basic uses of the 0.5 and I block gauges are: a primary standard, as a reference standard For calibrating other blocks and a working standard for calibrating sensitive measuring tools

  18. The basic applications for II block gauges is in the setting of adjustable limit gauges And for comparative length measurement The basic use of the III block gauges is in the actual measurement and For calibrating measuring instruments

  19. Usually the surfaces of the gauge blocks are subject to damages the following figure Shows how to remove such minute damges

  20. Other non-graduated instruments

More Related