1 / 10

TTA Activities on standardization of Integrated I/O Interface for mobile phones

Global Standards Collaboration (GSC) 14. TTA Activities on standardization of Integrated I/O Interface for mobile phones. Dr. LEE, HyeonWoo Chair of PG701, TTA . Highlight of Current Activities . New & Integrated. Incumbent. +. Earphone. Battery Charger. 20 pin. 24 pin (Since 2001).

hien
Download Presentation

TTA Activities on standardization of Integrated I/O Interface for mobile phones

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Global Standards Collaboration (GSC) 14 TTA Activities on standardization of Integrated I/O Interface for mobile phones Dr. LEE, HyeonWoo Chair of PG701, TTA

  2. Highlight of Current Activities New & Integrated Incumbent + Earphone Battery Charger 20 pin 24 pin (Since 2001) TV Out Cable USB Data Cable • New Standard on Integrated I/O Connection Interface for Mobile Phones (Revised inNov. 2007, certified in Jun. 2008) • To meet the slimming & miniaturizing trend as well as to increase consumer benefits • Estimated cost saving : USD 10 M per year Adapter for 24pin-20pin is available 2

  3. Proposed Strategic Direction • It is very important to have single standardized charger and I/O interface for mobile devices • User convenience • Resources saving • Cost saving for user and vendors • Need to encourage the global /regional harmonization of I/O interfaces of IMT mobile devices as well as other mobile/portable devices • Charging only • Charging and data exchange • Charging, data exchange and Audio/Visual connection • Etc.

  4. Challenges • TTA standard on the integrated I/O connection Interface for Mobile Phones: • Already published and widely used commercially in Korea • GSMA UCS(Universe changing solution) Plan • During MWC ’09, UCS initiatives was launched. (Joined by many vendors and operators) • Based on Micro USB (Elec. & Mech. Interface), completion by 2012. • OMTP (Open Mobile Terminal platform) • Published common charging and local data connectivity document V1.0 on Feb. 2009

  5. Challenges • IEC-TC100 (Battery charging interface for small hand-held multimedia devices) • The draft standard proposal was submitted by Finland as a Fast Track project proposal to the IEC TC100 in December 2008 • China • Published 4 pin mobile Phone charger recommendation on 2006 • Japan • CIAJ started discussion on standard charger interface for mobile phone from June 2008 , targeting completion by end of 2009. • Will be based on micro USB • Some guideline on Lithum ion battery was published on May 2008.

  6. Next Steps toward integrated I/O connection interface • Recognizing • To maximize user benefits of using single peripheral device , e.g. Charger, for different devices from different vendors. • To minimize the wasting of both costs and resources by customers to reuse one peripheral for several devices. • Further collaboration on integrated I/O connection interface standard for mobile Devices • Potential collaboration with other bodies • Forward compatibility with UCS & IEC TC100 can be considered.

  7. Supplementary Slides

  8. Mobile Communication Technical Committee (TC7) IMT-Advanced (PG701) IMTWiBro PG (PG702) Mobile Platform & Service (PG703) WLAN (PG704) Cognitive Radio (PG705) VHO (PG706) IMTEvaluation (PG707) Organization in TTA • Mobile Communications Related Project Groups • Mobile platform and Service PG(PG703) • Established the standard on the integrated 20pins I/O connection Interface for Mobile Phones on Nov. 2007. • March 2001 : 1st edition, 24pins (TTAS.KO-06.0028) • December 2002 : 3rd edition(revised version), 24pins (TTAS.KO-06.0028/R2) • April 2007 2007 : 4th edition, 20pins (TTAS.KO-06.0028/R3) • November 2007 : 5th edition(revised version), 20pins (TTAS.KO-06.0028/R4)

  9. Characteristic - Mechanical (Socket part) (Plug part) pin width width 24 pins 16.3 mm 3 mm Integrated 20 pins 10.6 mm 2.6 mm

  10. Characteristic – Electrical

More Related