1 / 19

Update on Electronics Activities

Update on Electronics Activities. Jim Pilcher University of Chicago 20-Jan-2006. Readout Electronics. Last talk on electronics was some time ago Need update on recent activities at Chicago PMT testing R&D on readout Prototype tank being prepared

hernandezn
Download Presentation

Update on Electronics Activities

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Update on ElectronicsActivities Jim Pilcher University of Chicago 20-Jan-2006

  2. Readout Electronics • Last talk on electronics was some time ago • Need update on recent activities at Chicago • PMT testing • R&D on readout • Prototype tank being prepared • Recall electronics parameter list on web site • http://hep.uchicago.edu/~pilcher/th13/electronics/electronics.html • Active Excel file which will update if input assumptions are changed • Also earlier electronics talk on web site J. Pilcher

  3. PMT Testing • The prototype tank being prepared will use six 8-inch PMTs • More details on tank later in the talk • We have 2 from each of three vendors • Candidate tubes for final detector • Hamamatsu R5912 • 10 stages, G=107 @ 1500V, dark count rate 4.0 KHz • Photonis XP1806 • 11 stages, G=107 @ 1340V, dark count rate 1.6 KHz • Electron Tubes 9354KFLB • 12 stages, G=107 @ 1300V, dark count rate 4.0 KHz • All have low activity glass envelope • All equipped with manufacturers’ bases J. Pilcher

  4. PMT Testing • Testing to date is limited • Test with small beaker (~ 200 ml) of liquid scintillator and Co-60 source in a dark box • Have looked mainly at single pe pulse shapes • Impacts readout electronics • Have looked with illumination of full photocathode and of a 2 cm x 2 cm region • Have operated at HV for G = 107 • Measurements also underway in low background lab on activity of glass • Will be reported at future meeting J. Pilcher

  5. PMT Testing • Single pe pulse from Hamamatsu shows reflection ~10 ns after primary peak • Not scope connection • Multiple pe signal includes scintillator properties J. Pilcher

  6. PMT Testing • Photonis tube showed low gain and broad signal • Perhaps faulty • Need to test second tube • Electron Tubes tube is similar to Hamamatsu but slightly slower J. Pilcher

  7. PMT Testing • Much more work to be done on PMTs • No special hardware on hand for detailed measurements • Photocathode uniformity, linearity, quantum efficiency, gain, after-pulsing, magnetic field sensitivity, etc. • Our goal was to take a first look before using them in prototype tank • We would be happy to have help from others on PMTs • Visitors and/or suggestions welcome J. Pilcher

  8. R&D on Readout • Strawman proposal presented in earlier talk on web site • Dual range, 12-bit readout on each PMT • Gain ratio 32:1 between two scales • Separate ADCs on each scale for easy inter-calibration of scales • Overall dynamic range 17 bits • 15 counts/pe at low end of range • High end ~70 times most probable single muon signal for “average” PMT • PMTs close to muon will receive much larger signals • High energy radiative tail for muons • Multiple muons from cosmics • Suitability to be confirmed by Monte Carlo studies J. Pilcher

  9. R&D on Readout • Design features of strawman approach • Similar to readout approach in ATL AS Tile Calorimeter, Auger, … • Convert PMT signal to a pulse of standard shape but amplitude proportional to input charge • Create Gaussian shape with FWHM of 30 ns • Sample with commercial 12-bit ADCs every 15 ns. • Extract amplitude and time of signal with respect to sampling clock by digital signal processing • Can give sub-1% amplitude resolution and ns time resolution (seen in ATLAS) • Shaper and pre-amp on PMT base • Digitizer in VME crate outside containment sphere J. Pilcher

  10. R&D on Readout • Shaping obtained with purely passive components (LC) • Exploits current source nature of PMT • Linearity guaranteed • Very low noise • Insensitive to input shape • Follow with active preamp and linear line driver Preamp and Line Driver PMT J. Pilcher

  11. R&D on Readout • Packaging and system planning • Shaper on PMT • Perhaps on same PCB as voltage divider • Two shielded twisted pair outputs • Digitizer on VME board • 32 channels per board • Form local trigger information from patch of 32 PMTs • Total number of pe • Overall trigger could be based on trigger info from 32 patches • Would allow some geometrical requirements as well as total signal • Trigger could be based on same data as read out J. Pilcher

  12. R&D on Readout • Digitize waveform from PMT/shaper every 15 ns • DSP processing extracts amplitude and time • Shape below is SPICE simulation of shaper J. Pilcher

  13. R&D on Readout • Possible organization VME Modules J. Pilcher

  14. R&D on Readout • Status • Working on shaper design • Thinking about VME board • How do we prove this will do the job? • Prototype tank already being prepared • Record data with calibration sources • Use proposed shaper but commercial digitizer • A CAEN VME module can sample every 1.0 ns • Can sample PMT directly to show ultimate time resolution • Can sample shaped signal every 15 ns to show time resolution and performance of shaped scheme J. Pilcher

  15. R&D on Readout • CAEN V1729 VME digitizer for prototype tests • Bandwidth 300 MHz • Up to 2 GHz sampling rate into storage caps. • 12 bit A-to-D conversion after trigger • Memory with 2520 samples per channel • Atrigger stops the continuous sampling • 4 differential inputs per module (2 PMTs) • 16-bit dynamic range using high-gain and low-gain inputs from each PMT • 11 bits reading PMT directly • $2.2K / channel (very pricey!) • 3 modules on order J. Pilcher

  16. R&D on Readout • How might electronics design evolve? • We have a strawman proposal for front-end and organization • Other options should be considered too • Cost and performance important metrics • Alternative readout schemes could be tried with prototype tank • Visitors welcome • Many important electronics topics need work • Trigger, signal processing, LV system, HV system, DAQ system J. Pilcher

  17. Prototype tank • Geometry? • ~ 1.6 m3normalliquid scint. • ~ 4.4 ℓ Gd loaded scint. • In 10-cm radius acrylic sphere • Capture length ~ 4 cm. @ 0.2%Gd • Movable along axis of cylinder • 3 PMTs on each end J. Pilcher

  18. Prototype tank • Plan is to run with various sources and cosmic muons • Californium • a fission source giving prompt gammas plus delayed gammas from neutrons capture in Gd • Co-60 for photons • Validate Monte Carlo code • Tank has different geometry but most of the physics processes of the full detector • Validate readout electronics • Get experience with candidate PMTs • Test bed for candidate readout systems • Status • Tank being fabricated and expected in early February • Three CAEN V1729 modules on order • A senior thesis project for Abby Kaboth so data is needed by May J. Pilcher

  19. Conclusions • That’s it from Chicago! J. Pilcher

More Related