1 / 32

Smart Antennas: Introduction, SDMA, Beamforming, DOA Estimation

This lecture provides an overview of smart antennas, including SDMA, beamforming, DOA estimation, and signal reconstruction. It covers the concepts of line-of-sight propagation, multipath propagation, MIMO channel modeling, and source separation. Related topics such as CDMA multi-user detection and MIMO transmission are also discussed.

henning
Download Presentation

Smart Antennas: Introduction, SDMA, Beamforming, DOA Estimation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Module-3 : TransmissionLecture-10 (18/5/00) Marc Moonen Dept. E.E./ESAT, K.U.Leuven marc.moonen@esat.kuleuven.ac.be www.esat.kuleuven.ac.be/sista/~moonen/ Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven/ESAT-SISTA

  2. Lecture 10 : Smart Antennas -Overview • Introduction: Smart Antennas SDMA (`driver application’) • SDMA v1.0 Line-of-sight propagation & beamforming DOA estimation and signal reconstruction • SDMA v2.0 Multi-path propagation MIMO channel modeling & source separation • Related Topics CDMA multi-user detection (see Lecture-9) MIMO transmission (see Lecture-2) Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  3. Introduction : Smart Antennas • Antenna arrays (hardware) with (software) `beam-forming’ (`beam-steering’), or similar (in multi-path scenario, see below). • `Antenna diversity’ Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  4. Introduction : Smart Antennas • Aim : increase signal-to-interference-and-noise ratio, hence improved performance/increased capacity (e.g. in CDMA systems) • Antenna arrays mostly considered for base station systems, not (often) for mobile terminals. • Currently simple systems with switching between antenna signals (=select best signal), fixed directional antennas for sectorization (e.g. GSM), ... • More advance systems considered for WLANs, for W-CDMA, etc... • Will consider SDMA as `driver application’ Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  5. radio channel x bits/sec/Hz/km2 transmitter receiver Introduction : SDMA • `Conventional’ wireless communications (`SISO’, TDMA/FDMA/CDMA) • What we have in mind is …. (MIMO transmission, SDMA) transmitter receiver radio channel 2x bits/sec/Hz/km2 transmitter receiver Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  6. Introduction : SDMA • Example : cellular mobile telephony (e.g. GSM) • Basic network architecture : -country covered by a grid of cells -each cell has a base station -base station connected to land telephone network and communicates with mobiles via a radio interface Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  7. Introduction : SDMA • Why cellular ? Capacity increase by spectrum reuse , pico-cells, etc. • Capacity increase by multiplexing : - GSM (900MHz) has 125 frequency channels/cell (FDMA) 8 time slots/channel (TDMA) In practice, capacity per cell << 8*125 ! - Spatial multiplexing : allows different users in 1 cell to use the same freq./time slot - Tool = DSP algorithms for signal separation, equalization Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  8. Introduction : SDMA • PS: in GSM neighboring cells cannot use same frequency bands (intercell interference). Same frequency band used in each 7th cell. Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  9. Introduction : SDMA • SDMA (`spatial division multiple access’) allows different users in the same cell to use the same frequency channel/time slot/code, and thereby offers substantial capacity increases when superimposed on a current system! • SDMA supports multiple directional connections on a single conventional radio channel through the usage of antenna arrays and advanced signal processing. Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  10. Introduction : SDMA PS: SDMA ~ `dynamic sectorization’ WARNING: • Major practical impediment is computational complexity (cfr. linear algebra-type operations at high sampling rates). …Gflops requirement…. • Major challenge for VLSI/ASIC design • First products probably in WLAN-type applications instead of cellular/mobile AIM: • Illustrate (near) future system design concepts…. Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  11. SDMA v1.0: Beamforming Approach • Assumptions: - sources are in the far-field - line-of-sight (LOS) connections - no multi-path effects - homogeneous medium/ideal channel characteristics - additive white Gaussian noise (AWGN) - no inter-symbol interference Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  12. SDMA v1.0: Beamforming Approach • Beamforming (`spatial filtering’): PS: compare with regular temporal (FIR) filtering Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  13. antenna outputs sources array gain matrix = * steering vector source-1 steering vector source-2 time samples for antenna-1 time samples for antenna-2 time samples for source-1 time samples for source-2 SDMA v1.0: Beamforming Approach • Data Model: Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  14. SDMA v1.0: Beamforming Approach • Data Model: `Steering vector’ a(theta) = array response vector, contains gains and phase shifts for a narrow-band wavefront impinging from direction-of- arrival (DOA) theta (and for a certain carrier frequency) The collection of `steering vectors’ for all possible angles theta, is referred to as the `array manifold’ Knowledge of `array manifold’ is crucial is beamforming approach Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  15. d angle SDMA v1.0: Beamforming Approach • Array manifold example: Uniform Linear Array where f = phase shift = Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  16. SDMA v1.0: Beamforming Approach • Significance of array manifold: -array manifold is a parametrization of the steering vector as a function of the DOA -if array manifold is known (by calibration or physical modeling), `channel modeling’ is reduced to DOA estimation. If the DOA for one particular source is identified, its complete steering vector is known. Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  17. antenna outputs sources array gain matrix = * SDMA v1.0: Beamforming Approach • Problem Statement: Given antenna outputs & array manifold, compute : -directions-of-arrival (DOA’s) -source signals ? Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  18. antenna outputs sources array gain matrix = * SDMA v1.0: Beamforming Approach • Solution (Part-1): DOA estimation `low-resolution algorithms’ : Fourier-based (e.g. for ULA’s) `high-resolution algorithms’ : -MUSIC [Schmidt 1979]: search for DOA such that steering vector optimally matches `column space’ of antenna output matrix -ESPRIT [Roy et al, 1987]: DOA’s identified as generalized eigenvalues of a matrix `pencil’ Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  19. SDMA v1.0: Beamforming Approach • Solution (Part-2): Beamforming and signal reconstruction Given steering vectors of signal-of-interest and interferers, compute beamformer weights such that interference signals are eliminated (`null steering’) Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  20. w1 w1 w2 w2 : : SDMA v1.0: Beamforming Approach • Solution (Part-2): Beamforming and signal reconstruction compute weight vector w1, w2,…. such that…. antenna outputs sources array gain matrix = * * * 1 0 : 0 Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  21. SDMA v1.0: Beamforming Approach • Solution (Part-2): - Compute weight vector w1, w2,…. that cancels all interferers, and retains the signal of interest (cfr. supra) - This is `zero-forcing’ solution. With additive noise, a minimum-mean-squared-error solution is preferred. - Other : Generalized sidelobe canceller, minimum variance distortionless response beamforming, Griffiths-Jim beamforming : adaptive beamformers, based on knowledge of steering vector of (only) the signal-of- interest, and where noise environment (incl. interferers) may be time-varying. Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  22. SDMA v1.0: Beamforming Approach • Beamforming approach deficiencies : - not always line-of-sight (LOS) connection - multi-path effects long/short term fading (e.g. wavelength=30cm @ 900MHz) - inter-symbol-interference (e.g. symbol ~ 1km @ 270kbits/sec) • Conclusion: - array manifold concept no longer useful - need more sophisticated data models/algorithms Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  23. SDMA v2.0: Channel Modeling Approach • Instead of this….. • we have this….. • now what?? Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  24. SDMA v2.0: Channel Modeling Approach • SDMA with multi-path corresponds to multi-user (multiple-input/multiple output) channel equalization problem : a) identify channel model b) reconstruct channel inputs from outputs+model single-user (e.g. GSM) multi-user (SDMA) Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  25. SDMA v2.0: Channel Modeling Approach • Step-1 is a channel modeling, i.e. identify... • Training sequence based versus `blind algorithms’ (see Lecture 5-6) Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  26. SDMA v2.0: Channel Modeling Approach • Step-2 is equalizer design, i.e. identify… • Zero-forcing (ISI=MUI=0) versus MMSE (see Lecture 5-6) • This is combined equalization & source separation Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  27. SDMA v2.0: Channel Modeling Approach • Step-1 & -2 may be combined : direct (training sequence based) equalizer design (see Lecture-5/6). Only training sequence for user-of-interest needed (not for other users). • Recursive vs batch processing (Lecture-5/6) • `Oversampling’ (i.e. having more outputs (antennas) than inputs (users)) is crucial for the existence of zero-forcing solutions (for FIR channels). • Connections with fractionally spaced equalization theory and filter bank theory. • Active area of research (blind algorithms based on 2nd order statistics, finite alphabet properties, etc.). • Commercial use: probably first WLAN, etc... Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  28. Related Topics CDMA multi-user detection algorithms (Lecture-9) MUD algorithms are conceptually similar : -Spreading viewed as a (transmit) filtering operation and part of the `channel’. -Nyquist-rate sampling at the receiver is symbol-rate oversampling, which is equivalent to spatial oversampling (multiple antennas). -etc... Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  29. Related Topics MIMO Transmission (Lecture-2) - Point-to-point transmission, where both transmitter and sender have antenna array - additional flexibility for sender (beamforming, …) - with M antennas at both ends, allows for M-fold channel capacity increase with the same transmit power budget (!) - example : V-BLAST Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  30. Conclusions • Smart Antennas - Advantages : improved signal-to-interference-and-noise ratio, increased capacity (CDMA). - Considered for W-CDMA, ... • SDMA v1.0 - Beamforming approach - Conceptually simple, but not applicable in multi-path environment • SDMA v2.0 - Multi-path/MIMO channel modeling approach - Powerful but complex • Related Topics - CDMA multi-user detection, MIMO transmission Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  31. Assignment 5.1 `Brain Teaser’ : • In Lecture-2, we have considered MIMO-transmission from a channel capacity point of view. Look at the conclusions again. One of the conclusions was that `one has to be lucky with the channel characteristic’. • Think of a similar channel capacity analysis for SDMA. Does one again have to be `lucky with the channel’ ? • What would be a most advantageous channel, in terms of channel capacity ? What would be the obtained channel capacity ? Is it `what we had in mind’ (cfr slide-5) ? Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

  32. Assignment 5.2 `Brain Teaser’: • In Lecture 7-8 we have considered multi-tone transmission, where a (high-rate) bit stream is split up into (low-rate) parallel bit streams, which are then used to QAM modulate different carriers. • Now consider these low-rate streams as being different users, accessing the same transmission channel. The carrier modulation may be viewed/compared with a spreading operation a la DS-CDMA. • Based on this, compare DMT with CDMA and MIMO, both from a capacity and a receiver structure point of view. Look for similarities and differences. • In a similar fashion, compare DMT with MIMO transmission Module-3 Transmission Marc Moonen Lecture-10 Smart Antennas K.U.Leuven-ESAT/SISTA

More Related