1 / 11

CH.1 Introduction 1-1 Introduction

CH.1 Introduction 1-1 Introduction ˙Power electronic circuits convert electric power from one form to another using electronic device (switch). ˙Relatively small power loss in the device. ˙Real devices absorb some power when in the on state and when

heller
Download Presentation

CH.1 Introduction 1-1 Introduction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CH.1 Introduction 1-1 Introduction ˙Power electronic circuits convert electric power from one form to another using electronic device (switch). ˙Relatively small power loss in the device. ˙Real devices absorb some power when in the on state and when transitions between on and off, but circuit efficiencies can still be quite high.

  2. 1-2 Converter classification ˙AC-DC converter ------- Rectifier ˙DC-AC converter ------- Inverter ˙DC-DC converter ------- Chopper ˙AC-AC converter ------- (AC Voltage Controller)

  3. 1-3 Electronic switches Diode : Fig.1-1

  4. Rectifier Diode : reverse recovery time trr < 1μs become important in high-frequency applications. Scottky diodes : metal-to-silicon barrier rather than a p-n junction. forward voltage drop ≒0.3V.; turn on and off faster than p-n junction diodes. Thyristors: Fig.1-2 →Three-terminal devices;switching fre. =10~20kHz;in high- power applications.

  5. Transistors : Fig.1-3~1-5 are operated as switches ( in the fully on or fully off state )in power electronics circuits, not operated as an amplifier circuit. ( in the active or linear region ). include bipolar junction transistors (BJTs), MOSFET, insulated-gate bipolar junction transistors.(IGBTs).

  6. BJTs : Rating up to 1200V, 400A; operating up to approximately 10kHz. Power BJTs generally are available in higher voltage and current rating than MOSFETs. A current-controlled device.

  7. MOSFET : A voltage-controlled device; are of the enhancement type rather than the depletion type. Drive circuit to turn a MOSFET on and off is usually simpler than that for a BJT. Rating are up to 1000Vand 50A. Switching speeds are faster than BJT and up to/beyond the 100kHz range.

  8. IGBT : is an integrated connection of a MOSFET and a BJT. The drive circuit is like that of the MOSFET, while the on-state characteristics are like that of the BJT. Switching speeds up to about 20kHz and have replaced BJT in many applications.

  9. 1-4 Switch selection • depends not only on the required voltage and current levels but also on its switching characteristics. • GTOs provide the control of both turn-on and turn-off, SCRs of turn-on but not turn-off, and diodes of neither. • The BJT is a minority-carrier device, whereas the MOSFET is a majority-carrier device which does not have minority-carrier storage delays, giving the MOSFET an advantage in switching speeds. • BJT switching times may be a magnitude longer than for the MOSFET. Therefore the MOSFET generally has lower switching losses.

  10. GTO : Can be turned off with a negative gate current,but its magnitude must be very large compared to the turn-on current. Triac : is capable of conducting current in either direction; is equivalent to two antiparallel SCRS. MCT: is equivalent to the GTO but without the high turn-off gate current requirement;has an SCR and two MOSETs. One MOSFET turns the SCR on,and one MOSFET turn the SCR off.

More Related