1 / 16

ECE 450 Introduction to Robotics

ECE 450 Introduction to Robotics. Section: 50883 Instructor: Linda A. Gee 9/30/99 Lecture 09. Inverse Kinematics. Purpose: To generate an arm solution for the manipulator

Download Presentation

ECE 450 Introduction to Robotics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ECE 450 Introduction to Robotics Section: 50883 Instructor: Linda A. Gee 9/30/99 Lecture 09

  2. Inverse Kinematics • Purpose: To generate an arm solution for the manipulator • Given 0T6 and the desire is to solve for the values of the joint angles defined by q (q1, q2, q3, q4, q5, q6)T • A variety of methods exist for solving the inverse kinematics problem

  3. Methods for Solving the Inverse Kinematics Problem • Inverse Transform Paul et al. 1981 • Screw Displacement Kohli and Soni 1975 • Dual Matrices Denavit 1956 • Dual Quaternian Young and Freudenstein 1964 • Iterative Uicker et al. 1964 • Geometric Approach Lee and Ziegler 1984

  4. nx sx ax px 0T6 = ny sy ay py nz sz az pz 0 0 0 1 General Information about Inverse Kinematics Arm Transformation Matrix = 0A11A22A33A44A55A6 Expansion of this expression yields: 12 equations and 6 unknowns For the PUMA robot: 6 unknowns correspond to joint angles

  5. Observations • Since there are more equations than unknowns, this implies that there are multiple solutions for the PUMA robot arm and arms that have similarly defined joints • Multiple solutions indicate that additional system information or conditions are necessary to yield a unique solution

  6. Approaches to Finding the Inverse Kinematics Solution • Investigate two specific methods: • Euler Angles Solution • Geometric Approach

  7. nx sx ax = Rz, Ru, Rw, ny sy ay nz sz az Inverse Transform Technique Using Euler Angles 3x3 Rotation Matrix

  8. S C +C C S - S S + C C C -C S S S S C C Inverse Transform Technique cont’d C C -S C S - C S -S C C S S Rz, Ru, Rw, =

  9. Inverse Transform cont’d • Use a one-for-one correspondence to solve for the [n s a]T values • Solve for , ,  • However, this leads to an ill-conditioned solution due to: • Cosine is an even function • Sine approaches zero when   0 or    

  10. Introduce a Consistent Approach • Use atan2(y,x) to solve for tan-1(y/x) expression where 0    /2 for +x and +y /2    for -x and +y  = atan2 (y,x) = -   -/2 for -x and -y -/2   0 for +x and -y

  11. nx sx ax = Rz, Ru, Rw, ny sy ay nz sz az cos -sin 0 cos -sin 0 1 0 0 = 0 cos -sin sin cos 0 sin cos 0 0 sin cos 0 0 1 0 0 1 Inverse Transform Technique cont’d Use the expression

  12. Useful Transformation Information • Q = R-1 = RT • QR = RTR = R-1R = I3

  13. Inverse Transformation Method • Pre-multiply by Rz,-1 • Equate the elements in the matrix • Solve for , , 

  14. Inverse Transform Method for PUMA Robots • PUMA robots use O, A, T to describe the Euler angles • O: (Orientation) the angle formed from the y0 axis to the projection on the XY plane about the z0 axis • A: (Altitude) the angle formed from the XY plane to the tool a axis about the s axis of the tool • T: (Tool) the angle formed from the XY plane to the tool s axis about the a axis of the tool

  15. Euler Angles Defined for the PUMA Robot *Fu, Page 58

  16. a y0 s n x0 Tool Coordinate System z0 Initial alignment of the tool coordinate system

More Related