New mexico ffa
1 / 26

New Mexico FFA - PowerPoint PPT Presentation

  • Updated On :

New Mexico FFA. Agricultural Mechanics Career Development Event Engine Power. Clutch Wrench. A hand tool used to remove the starter clutch on small gasoline engines. Compression Gauge. Used to check compression pressures of the cylinders on internal combustion engines. Cylinder Deglazer.

I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
Download Presentation

PowerPoint Slideshow about 'New Mexico FFA' - havyn

An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.

- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript
New mexico ffa l.jpg

New Mexico FFA

Agricultural Mechanics

Career Development Event

Engine Power

Slide2 l.jpg

Clutch Wrench

  • A hand tool used to remove the starter clutch on small gasoline engines.

Slide3 l.jpg

Compression Gauge

  • Used to check compression pressures of the cylinders on internal combustion engines.

Slide4 l.jpg

Cylinder Deglazer

  • An abrasive tool used to remove the glassy glaze from the cylinder wall of an internal combustion engine.

Slide5 l.jpg

Dial Indicator

  • A precision micrometer type instrument that gives an exact reading as the needle moves around the dial face.

Slide6 l.jpg


  • Combination meter used for measuring contact dwell and engine rpms.

Slide7 l.jpg

Feeler Gauge

  • A precision measuring tool used to check clearances between parts. Available in either thin blades of hardened steel or wire. The thickness of the thin blades or wire is marked in thousandths of an inch or in millimeters.

Slide8 l.jpg

Flywheel Holder

  • Used to hold the flywheel on small gasoline engines when the starter clutch is being removed or installed.

Slide9 l.jpg

Flywheel Removal Tool

  • Designed to assist in the removal of the flywheel. It fits over the end of the crankshaft and with a sharp blow(s) on the tool with a ball pein hammer, will dislodge the flywheel from the taper portion of the crankshaft.

Slide10 l.jpg


  • A precision measuring tool that will give readings accurate to within ten thousandths of an inch.

Piston ring compression ring l.jpg
Piston Ring Compression Ring

  • Seals the gap between the cylinder and piston wall so that combustion will take place.

Piston ring oil ring l.jpg
Piston Ring – Oil Ring

  • Carries oil up and down the cylinder wall in an internal combustion engine.

Piston ring scraper ring l.jpg
Piston Ring Scraper Ring

  • Scrapes and cleans the walls of the pistion in an internal combustion engine.

Slide14 l.jpg

Power Timing Light

  • Used to indicate the correct timing of the ignition of a spark ignition engine. The timing light is connected to the secondary circuit which produces flashes of light with the firing of a specific spark plug. Generally connected to number 1 cylinder.

Slide15 l.jpg

Puller Set

  • Used to remove bearings, pulleys, and other shaft hugging instruments.

Slide16 l.jpg

Ridge Reamer

  • Tool used to cut away the ring ridge at the top of the cylinder.

Slide17 l.jpg

Ring Compressor

  • A tool designed to force piston rings inward into their grooves so that the piston and rings can be inserted into the engine cylinder bore.

Slide18 l.jpg

Ring Expander

  • A tool designed to force piston rings outward so the rings can be removed or installed.

Slide19 l.jpg

Small Hole Gauge

  • This adjustable gauge is used to measure the inside diameter of small holes. The gauge is adjusted to the hole diameter and then measured with an outside micrometer.

Spark plug l.jpg
Spark Plug

  • A device that carries the ignition spark into the engine combustion chamber.

Spark plug gauge l.jpg
Spark Plug Gauge

  • Used to adjust the terminal gap on a spark plug.

Spark plug wrench l.jpg
Spark Plug Wrench

  • A specially designed deep socket with an internal cushion to protect the porcelain body of the spark plug when tightening.

Slide23 l.jpg

Small Engine Tachometer

  • Used to indicate speed of engine in revolutions per minute (rpm).

Slide24 l.jpg

Telescoping Gauge

  • Used to measure the inside diameter of cylinders or large bores with the aid of an outside micrometer.

Slide25 l.jpg

Torque Wrench

  • Used to draw or tighten nuts, cap screws, and other various bolts up to specified tension by measuring the torque.

Slide26 l.jpg

Valve Spring Compressor

  • Used to compress the valve spring in order to remove or install valve retainer.