Download
1 / 13
130 likes | 319 Views
Field Definition And Coulomb’s Law. Coulomb’s Law. Gives us the rule for dealing with two point charges. (in practice for two charges whose separation is much greater than the radius of the charges.). r. Charge Q 1. Charge Q 2. The field strength of an electric field is defined by.
E N D
Coulomb’s Law • Gives us the rule for dealing with two point charges. (in practice for two charges whose separation is much greater than the radius of the charges.) r Charge Q1 Charge Q2
The field strength of an electric field is defined by (Unit NC-1) That is the force exerted by the field on unit charge (ie a charge of 1 Coulomb) placed at that point. +1C F
With a Radial Field Test Charge The electric field strength take sthe form of Coulombs law. Why? + Q The two variable quantities are the charge Q and the distance r The electric field strength formula is just coulombs law applied to a test charge of 1C !!
Uniform electric fields Test charge + + + _ _ _ In a uniform field the field strength at any point is given by Remember this only applies where the field lines are parallel Remember this is just the force on a unit charge in the field
Together with these relationships: The definition of the volt The electric field strength due to a point charge The electric field strength in a uniform field So the unit of E is Vm-1 as well as NC-1 Form the basis of any solution to the electric fields questions you will be asked
Q Electric Potential • The electrical potential of anypoint in the field is the work done to bring a (+) charge of 1 coulomb from infinity (i.e. beyond the influence of the field) to that point in the field. So the electric potential at point P 1 coulomb positive charge P
Implications: 1.The electrical potential of any point beyond the field is zero 2. The electric potential is the potential energy change for 1C of charge The electric potentila is given by:
Calculations 4.0μC -6.0μC A B Two charges with the values shown are placed along are separated by a distance of 100mm. At what distance from A along the line AB does the electric potential reach 0V? 100mm When the potential along AB reaches zero VA=VB i.e. VA +VB = 0 Now:
V=0 4.0μC -6.0μC 40mm 60mm A B 100mm This ratio tells us that V=0 40mm from A
Where the numbers are not as straightforward you can continue as follows: As the total distance between the charges is 100mm 1 2 Now substituting 2 into 1
Calculate the magnitude of the electric field strength at the surface of a nucleusU (Z=92 M=238) . Assume that the radius of this nucleus is 7.4 × 10–15 m. .................................................................................................................................... .................................................................................................................................... .................................................................................................................................... Magnitude of electric field strength =......................................... State the direction of this electric field. .................................................................................................................................... State one similarity and one difference between the electric field and the gravitational field produced by the nucleus. Similarity .................................................................................................................... . ................................................................................................................................... Difference ................................................................................................................... . ...................................................................................................................................
The diagram shows a positively charged oil drop held at rest between two parallel conducting plates A and B. The oil drop has a mass 9.79 x 10–15 kg. The potential difference between the plates is 5000 V and plate B is at a potential of 0 V. Is plate A positive or negative? ……………………………………………………………………………………………… Calculate the electric field strength between the plates. Electric field strength =………………………………… Calculate the magnitude of the charge Q on the oil drop. Charge =…………………………………… How many electrons would have to be removed from a neutral oil drop for it to acquire this charge? ……………………………………………………………………………………………… (3)
