Laminate | High Quality

5. Learn how to install laminate flooring without professional help Step by step to install laminate flooring 1st step: Place the appropriate blanket on the subfloor, in the opposite direction to the placement of the planks, leaving 1 cm of excess in the corner of the wall and joining the strips with adhesive tape. 2nd stepb: Position the spacers along the wall closest to the place where the installation will begin, which should be the widest in the room. Place the 1st plank with the male side (the one made to fit, not to receive the fitting of another board) facing the wall, then place the 2nd. During installation, it is important to make sure the wood design is in sequence. 3rd step: It is very likely that the last ruler in the first row will need to be adjusted for length. When sawing, it is important that the decorative side is facing down and that it is at least 20 cm long. To install, the cut part must face the wall. 4th step: Start the second row using a cut ruler, placing it at a 30° angle and working down to fit it. Alternating the position of the cut pieces is a rule of thumb for installing laminate flooring , so make the third row as the first and the fourth as the second until the end of the process. 5th step: Once all planks are installed, remove the spacers and secure the baseboards to the wall with glue and headless nails. To finish the finish, just fit the profiles described above, according to your room's needs, and you're done!

7. Contact Us….. If you have any questions, would like to request more information or request a sample of our products we welcome you to call us at 647-494-0219 or fill out the contact form and one of our flooring specialists will be more then happy to assist you. You can also visit us at one of our convenient locations located across the Greater Toronto Area.