MS48C. PABX with Caller ID. MS48C - PABX with Caller ID. MS48C is now ready for exports !!! Ergonomic Design in Plastic Cabinet Caller ID Detection SMS Transmission. MS48C - PABX with Caller ID. Allows sending / receiving SMS through standard extensions as an option .
PABX with Caller ID
MS48Cis now ready for exports!!!
Caller ID (CLID) & SMS can be integrated via EXP48C-CLID card. This card is to be installed on top of the motherboard if there are no expansion modules or on the lastly installed expansion module otherwise.
KTS Input of CLID Module
N.C. – Used for Firmware Changes
KTS Output to Consoles
N.C. – Used for Debugging
No need to make separate grounding for EXP48C Expansion Modules. EXP48C is grounded once it is installed on the motherboard through a ground pin on the motherboard.
Ground Pin for EXP48C
All ground cables are collected at this point. MS48C should be grounded from this ground terminal.
Extension / line connectors allow vertical cabling. The position of connectors has been changed from horizontal to vertical.
12V- 7Ah battery can be located under the battery belt inside the cabinet.
SPS48 Power Card with transformers are surrounded by portable plastic casing.
HOW TO OPEN THE CABINET
HOW TO ACCESS POWER & BATTERY SWITCHES
HOW TO MOUNT MS48C ON THE WALL