1 / 61

hat

hat. ou. ee. s. N ot. hat. ou. et. W. Y. S. I. W. Y. By Philip Lawson. G. Luminosity. Resolution. Colour. What You Get. Infinitely Bright. No Light. Light. In the real world, Luminosities range from:. Bright EV 17 1 EV = x 2. Dark EV 5. Light meter.

gyula
Download Presentation

hat

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. hat ou ee s Not hat ou et W Y S I W Y By Philip Lawson G

  2. Luminosity Resolution Colour What You Get

  3. Infinitely Bright No Light Light • In the real world, Luminosities range from:

  4. Bright EV 17 1 EV = x 2 Dark EV 5 Light meter • The light meter can only measure a middling range of Luminosities:

  5. Max Min High Key 1 Film Emulsion • The Film Emulsion can record only a narrower range of Luminosities7 - 9 EV

  6. 2 Film Emulsion • But it is our choice which range to expose on Max Min Low Key

  7. 3 Film Emulsion • If the film stock has a dynamic range of 7 EV it has a tonal range of 27 = 128 levels • If the film stock has a dynamic range of 8 EV it has a tonal range of 28 = 256 levels • If the film stock has a dynamic range of 9 EV it has a tonal range of 29 = 512 levels

  8. Film Scanners • The Film Scanner converts these into Numbers in the range 0 -255 255 128 0 • It might not be able to record the full range of Film Luminosities

  9. Print Scanners • The Print Scanner suffers in that it • Is scanning a print that already has a reduced luminosity range • Is scanning the print by reflection 255 128 0

  10. The Monitor 1 • The monitor, being a light source is capable of a large dynamic range 255 128 0

  11. The Monitor 2 • This is adjustable via: • Brightness • Contrast • Gamma

  12. The Print • The Print, being a reflective medium is only as bright as the base paper and the light source • And as dark as the minimum reflectance

  13. Luminous Range • Strive to retain the highest range of luminosities at EACH conversion.

  14. Ensure scanner settingsdeliver a histogram showing even distribution over the full range. Luminous Range • Transparent Film has a higher latent DMAX than Print, so use a FILM SCANNER, min DMAX = 3.6 • Use the best image sources • IF possible scan to 16-bit grayscale and retain for a.l.a.p.

  15. Caution • Care when modifying the image • BRIGHTNESS • CONTRAST • A pixel cannot be brighter than 255 • Burn out • A picture cannot possess a greater dynamic range than 256

  16. Infinitely Bright No Light Colour • In the real world, Colour is absolute and of infinite variation • Each Primary R, G & B, may be thought of as a Colour Luminosity and follows similar degredation

  17. Colour Gamut • The Gamut of visible colours is described by the LAB space in the Chromaticity diagram

  18. Bright EV 17 Dark EV 5 Colour Photometer • The Colour Photometer can measure both the absolute and relative (Colour Temperature) ranges

  19. Max Min Film Emulsion • Film Emulsions record colour differently (CYM) • Manufacturer/Stock • Reciprocity Failure

  20. Film Gamut • The Gamut of the Film Emulsion is described by the EKTA space in the Chromaticity diagram

  21. 255 128 0 255 128 0 255 128 0 Film Scanners • The Film Scanner converts Red, Green and Blue into Numbers in the range 0 - 255

  22. 255 128 0 255 128 0 255 128 0 The Monitor 1 • The monitor, being a light source is capable of a large dynamic range

  23. 255 128 0 255 128 0 255 128 0 The Monitor 2 • Provided that you’ve got it set right!

  24. The Monitor 3 • 256 Colours or “High Colour (16-bit)” will give you a Posterised representation • Must use “High Colour (24-bit)”

  25. Monitor (RGB) Gamut • The Gamut of the Monitor is described by the RGB space in the Chromaticity diagramNote the mismatch

  26. Your Phosphors and selected colour temperature The Monitor 4 • However the colour that you get is influenced by:

  27. Your Gammasettings The Monitor 5 • However the colour that you get is influenced by:

  28. The Monitor 6 • However the colour that you get is influenced by: • Your Profiles

  29. The Monitor 7 • The colour that you SEE is influenced by: • Any funny desktop coloursor artificial light

  30. The Programperforms the RGB -> CYMKTranslation The Print • The Print, being a reflective medium has Cyan, Yellow and Magenta translucent inks applied

  31. Print (CYMK) Gamut • The Gamut of the Printer is described by the CMYK space in the Chromaticity diagramAlthough this is very dependant upon the light under which it is viewed

  32. Colour Range • Whilst modifying colour balance, ensure that you do not create an OUT OF GAMUT colour

  33. The Printer 1 • The Printer make numerous Necessary and Unnecessary Corrections • Colour Space

  34. The Printer 2 • The Printer make numerous Necessary and Unnecessary Corrections • Transferand • Bleed

  35. The Printer 3 • The Printer make numerous Necessary and Unnecessary Corrections • Mode

  36. The Printer 4 • The Printer make numerous Necessary and Unnecessary Corrections • Quality • Media • Halftoning • Adjustment

  37. The Printer 5 • Basic Advice • Print at highest Quality (1440 dpi) • Select the Correct Media Type • Use “Error Diffusion” Halftoning • Use “Photo-realistic” Colour Adjustment • Not “Automatic”!!

  38. MonitorICC Profile ScannerICC Profile PrinterICC Profile Kodak CDICC Profile Characterisation • Colour Management requires each device to be Characterised (by an ICC Profile)

  39. Profiles • Each Device is Characterised by a PROFILE that in turns needs Calibration

  40. Your Gammasettings for the Monitor Calibration • Calibration requires • Consistent Conditions • A Known Calibration Source

  41. Profiles • Photoshop manages your Profiles

  42. Colour Range • Use a scanner that Optimises the dynamic range of each colour independently. • Colour Casts can easily be eliminated • Take care when modifying the image • BRIGHTNESS • CONTRAST • Ink is not permanent. Protect from extreme light sources and Save data files.

  43. Resolution • In the real world, the resolution that we achieve is governed by: • Focus • Resolving power of lens • Camera Shake • Heat Haze

  44. Film Emulsion • The Film Emulsion is limited by the clumping of the grains. • Typical Resolving power is <50 lpmm Max = 1750 lines 24mm 35mm

  45. Film Scanners • Typical Film Scanners can detect 2700 d.p.i. • This is sharper than the finest level of detail but not enough to see the individual grains. Max = 4000 pixels 24mm 35mm

  46. Print Scanners • Typical Print Scanners can detect 600 d.p.i. • On a 5” x 7” Printthis would produce4200 pixels and a38Mbyte file. Max = 4200 pixels 5” 7”

  47. The Monitor 1 • The monitor resolution can be a number of prescribed settings LESS than the number of Phosphor dots on the screen. • Choose the highestas this gives youmore desktopspace for all thosepalettes

  48. The Monitor 2 • Always Zoom In or Out and Pan around. • Learn to use the quick keys: • Ctl-0 • Z followed bydrag a rectangle • Ctl + drag a rectanglein the Navigator • Space Bar

  49. The Monitor 3 • NEVER change the Image Size down • This throws vital information away!

More Related