1 / 16

Non-Ideal VLE Calculations

Non-Ideal VLE Calculations. The Pxy diagram to the right is for the non-ideal system of chloroform-dioxane. Note the P-x 1 line represents a saturated liquid, and is commonly BUBL LINE referred to as the bubble-line. P-y 1 represents a saturated vapour, and is referred to as the

gwylan
Download Presentation

Non-Ideal VLE Calculations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Non-Ideal VLE Calculations • The Pxy diagram to the right • is for the non-ideal system of • chloroform-dioxane. • Note the P-x1 line represents • a saturated liquid, and is commonly BUBL LINE • referred to as the bubble-line. • P-y1 represents a saturated • vapour, and is referred to as the • dew line (the point where a liquid DEW LINE • phase is incipient). Lecture 23

  2. Non-Ideal BUBL P Calculations • The simplest VLE calculation of the five is the bubble-point pressure calculation. • Given: T, x1, x2,…, xn Calculate P, y1, y2,…, yn • To find P, we start with a material balance on the vapour phase: • Our equilibrium relationship provides: • (14.8) • which yields the Bubble Line equation when substituted into the material balance: • or • (14.10) Lecture 23

  3. Non-Ideal BUBL P Calculations • Non-ideal BUBL P calculations are complicated by the dependence of our coefficients on pressure and composition. • Given: T, x1, x2,…, xn Calculate P, y1, y2,…, yn • To apply the Bubble Line Equation: • requires: • ? •  •  • Therefore, the procedure is: • calculate Pisat, and i from the information provided • assume i=1, calculate an approximate PBUBL • use this estimate to calculate an approximate i • repeat PBUBL and i calculations until solution converges. Lecture 23

  4. Non-Ideal Dew P Calculations • The dew point pressure of a vapour is that pressure which the mixture generates an infinitesimal amount of liquid. The basic calculation is: • Given: T, y1, y2,…, yn Calculate P, x1, x2,…, xn • To solve for P, we use a material balance on the liquid phase: • Our equilibrium relationship provides: • (14.9) • From which the Dew Line expression needed to calculate P is generated: • (14.11) Lecture 23

  5. Non-Ideal Dew P Calculations • In trying to solve this equation, we encounter difficulties in estimating thermodynamic parameters. • Given: T, y1, y2,…, yn Calculate P, x1, x2,…, xn • ? • ? •  • While the vapour pressures can be calculated, the unknown pressure is required to calculate i, and the liquid composition is needed to determine i • Assume both parameters equal one as a first estimate, calculate P and xi • Using these estimates, calculate i • Refine the estimate of xi and estimate i ((12.10ab) • Refine the estimate of P • Iterate until pressure and composition converges. Lecture 23

  6. 8. Non-Ideal Bubble and Dew T Calculations • The Txy diagram to the right • is for the non-ideal system of • ethanol(1)/toluene(2) at P =1atm. • Note the T-x1 line represents • a saturated liquid, and is commonly DEW LINE • referred to as the bubble-line. • T-y1 represents a saturated • vapour, and is referred to as the • dew line (the point where a liquid • phase is incipient). • BUBL LINE Lecture 23

  7. Non-Ideal BUBL T Calculations • Bubble point temperature calculations are among the more complicated VLE problems: • Given: P, x1, x2,…, xn Calculate T, y1, y2,…, yn • To solve problems of this sort, we use the Bubble Line equation: • 14.10 • The difficulty in determining non-ideal bubble temperatures is in calculating the thermodynamic properties Pisat, i, and i. • Since we have no knowledge of the temperature, none of these properties can be determined before seeking an iterative solution. Lecture 23

  8. Non-Ideal BUBL T Calculations: Procedure • 1. Estimate the BUBL T • Use Antoine’s equation to calculate the saturation temperature (Tisat) for each component at the given pressure: • Use TBUBL =  xi Tisat as a starting point • 2. Using this estimated temperature and xi’s calculate • Pisat from Antoine’s equation • Activity coefficients from an Excess Gibbs Energy Model (Margule’s, Wilson’s, NRTL) • Note that these values are approximate, as we are using a crude temperature estimate. Lecture 23

  9. Non-Ideal BUBL T Calculations: Procedure • 3. Estimate i for each component. • We now have estimates of T, Pisatand i, but no knowledge of i. • Assume that i=1 and calculate yi’s using: 14.8 • Plug P, T, and the estimates of yi’s into your fugacity coefficient expression to estimate i. • Substitute thesei estimates into 12.9 to recalculate yi and continue this procedure until the problem converges. • Step 3 provides an estimate of i that is based on the best T, Pisat, i, and xi data that is available at this stage of the calculation. • If you assume that the vapour phase is a perfect gas mixture, all i =1. Lecture 23

  10. Non-Ideal BUBL T Calculations: Procedure • 4. Our goal is to find the temperature that satisfies our bubble point equation: • (14.10) • Our estimates of T, Pisat, i and i, are approximate since they are based on a crude temperature estimate (T =  xi Tisat) • Calculate P using the Bubble Line equation (12.11) • If Pcalc < Pgiven then increase T • If Pcalc > Pgiven then decrease T • If Pcalc = Pgiven then T = TBUBL • The simplest method of finding TBUBL is a trial and error method using a spreadsheet. • Follow steps 1 to 4 to find Pcalc. • Change T and repeat steps 2, 3, and 4 until Pcalc = Pgiven Lecture 23

  11. Non-Ideal DEW T Calculations • The dew point temperature of a vapour is that which generates an infinitesimal amount of liquid. • Given: P, y1, y2,…, yn Calculate T, x1, x2,…, xn • To solve these problems, use the Dew Line equation: • 14.11 • Once again, we haven’t sufficient information to calculate the required thermodynamic parameters. • Without T and xi’s, we cannot determine i, i or Pisat. Lecture 23

  12. Non-Ideal DEW T Calculations: Procedure • 1. Estimate the DEW T • Using P, calculate Tisat from Antoine’s equation • Calculate T =  yi Tisat as a starting point • 2. Using this temperature estimate and yi’s, calculate • Pisat from Antoine’s equation • i using the virial equation of state • Note that these values are approximate, as we are using a crude temperature estimate. Lecture 23

  13. Non-Ideal DEW T Calculations: Procedure • 3. Estimate i, for each component • Without liquid composition data, you cannot calculate activity coefficients using excess Gibbs energy models. • A. Set i=1 • B. Calculate the Dew Pressure: • C. Calculate xi estimates from the equilibrium relationship: • D. Plug P,T, and these xi’s into your activity coefficient model to estimate i for each component. • E. Substitute these i estimates back into 12.12 and repeat B through D until the problem converges. Lecture 23

  14. Non-Ideal DEW T Calculations: Procedure • 4. Our goal is to find the temperature that satisfies our Dew Line equation: • (14.11) • Our estimates of T, Pisat, i and i, are based on an approximate temperature (T =  xi Tisat) we know is incorrect. • Calculate P using the Bubble Line equation (14.10) • If Pcalc < Pgiven then increase T • If Pcalc > Pgiven then decrease T • If Pcalc = Pgiven then T = TDew • The simplest method of finding TDew is a trial and error method using a spreadsheet. • Follow steps 1 to 4 to find Pcalc. • Change T and repeat steps 2, 3, and 4 until Pcalc = Pgiven Lecture 23

  15. 9.3 Modified Raoult’s Law • At low to moderate pressures, the vapour-liquid equilibrium equation can be simplified considerably. • Consider the vapour phase coefficient, i: • Taking the Poynting factor as one, this quantity is the ratio of two vapour phase properties: • Fugacity coefficient of species i in the mixture at T, P • Fugacity coefficient of pure species i at T, Pisat • If we assume the vapour phase is a perfect gas mixture, this ratio reduces to one, and our equilibrium expression becomes, • or 1 Lecture 23

  16. Modified Raoult’s Law • Using this approximation of the non-ideal VLE equation simplifies phase equilibrium calculations significantly. • Bubble Points: • Setting i =1makes BUBL P calculations very straightforward. • Dew Points: Lecture 23

More Related