1 / 20

HYDRAULIC SYSTEMS and APPLY DEVICES

HYDRAULIC SYSTEMS and APPLY DEVICES. Chapter 5 Page 93 Classroom Manual. LAWS of HYDRAULICS. All hydraulic systems have a liquid, pump, lines, control valves, and a output device. Hydraulics is the study of liquids in motion. Liquids will conform to the shape of their container.

Download Presentation

HYDRAULIC SYSTEMS and APPLY DEVICES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. HYDRAULIC SYSTEMS and APPLY DEVICES • Chapter 5 • Page 93 • Classroom Manual

  2. LAWS of HYDRAULICS • All hydraulic systems have a liquid, pump, lines, control valves, and a output device. • Hydraulics is the study of liquids in motion. • Liquids will conform to the shape of their container. • Liquids will react predictably to pressure exerted on them. Page 94

  3. PASCAL’S LAW • Pressure is equal in all areas of a sealed hydraulic system. • Hydraulics can be used to increase the force available to do work. Page 95

  4. FLUID CHARACTERISTICS • Any leak will decrease pressure. • Liquids have no shape of their own. • Liquids seek a common level. • Liquids are incompressable. Page 96

  5. MECANICAL ADVANATAGE • Hydraulics do work in the same way as a gear or lever. • Force x Distance = Work • Increase force = Reduced distance. • Decrease force = Increased distance.

  6. AUTOMATIC TRANS APPLICATIONS • Fluid is used to apply bands and clutches. • Servos are used to apply bands. • Holding power is determined by band type and pressure applied. • A servo multiplies force through hydraulic action. Page 97

  7. FLUID • All hydraulic systems use a fluid to perform work. • All domestic manufactures require a petroleum-based fluid. • Some import manufactures require the use of a synthetic fluid. • ATF is dyed clear red, and darken when burnt, or become milky when contaminated by water. Page 97

  8. FLUID ADDITIVES • Zinc, phosphorus, and sulfur are commonly added to reduce friction. • Detergent additives, keep the parts clean. • Dispersants keep contaminants suspended so they can be trapped by the filter. • ATF is subjected to many tests, oxidation resistance, corrosion and rust inhibition, flash and flame points, and resistance to foaming. Page 97

  9. FLUID REACTIONS • Chemicals in fluids may react with seals. • Fluids are tested for compatibility with a specific transmission. • Incompatibility can result in swelling or shrinking seals. • ATF is also tested for the ability to mix with other brands.

  10. RECOMMENDED APPLICATIONS • There are several types of ATF. • Fluid types include A, CJ, H, Dextron, and Mercon. • Types F and G do not contain friction modifiers. Page 98

  11. FILTERING • Filters trap dirt and particles. • Untapped particles can cause sticking valves and premature wear. • Deep pans will have a unique filter. • Three types of filter media screen, paper, felt. • Secondary filters for pumps, governors, ect. Page 99

  12. TRANS OIL FILTER Page 99

  13. RESERVOIR • Reservoir is the oil pan. • Oil is drawn from the pan and returned after being circulated through the selected circuits. • Level must be maintained to prevent aeration. • All transmissions must have a vent to allow air movement in and out of the trans. Page 100

  14. OIL PAN

  15. TRANS COOLERS • Keeping the ATF cool ensures that it will be able to adequately lubricate and cool the transmission. • The trans cooler dissipates heat into the air stream flowing though the radiator. • Return oil is lube oil in most trans’s. Page 100

  16. OIL COOLER CIRCUIT Page 100

  17. OIL PUMPS • The oil pump provides circulation and pressure. • Oil pump is driven by hub of the torque converter. • Three types of pumps gear, rotor, vane. • Vane type is variable displacement. Page 101

  18. GEAR PUMP Page 103

  19. ROTOR PUMP Page 103

  20. 400 PUMP

More Related