1 / 16

Guo J. 1 , Shao K. 1 , Rui S.H. 1 , Sun X.X. 1 , Cao Y. 1 , Hu K.L. 1 , Wang C.J. 2,*

Explosion Venting of Rich Hydrogen-air Mixtures in a Cylindrical Vessel with Two Symmetrical Vents. Guo J. 1 , Shao K. 1 , Rui S.H. 1 , Sun X.X. 1 , Cao Y. 1 , Hu K.L. 1 , Wang C.J. 2,* 1 Anhui University of Science and Technology, PR China 2 Hefei University of Technology, PR China.

grisham
Download Presentation

Guo J. 1 , Shao K. 1 , Rui S.H. 1 , Sun X.X. 1 , Cao Y. 1 , Hu K.L. 1 , Wang C.J. 2,*

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Explosion Venting of Rich Hydrogen-air Mixtures in a Cylindrical Vessel with Two Symmetrical Vents Guo J.1, Shao K.1, Rui S.H.1, Sun X.X.1, Cao Y.1, Hu K.L.1, Wang C.J.2,* 1Anhui University of Science and Technology, PR China 2 Hefei University of Technology, PR China

  2. Outline • Background and objectives • Experimental setup and conditions • Results and discussion • Conclusions • Acknowledgments

  3. Background • the increasing use of hydrogen • the safety issues related to hydrogen explosion venting • lack of study on explosion venting through multi-vents

  4. Objectives Experiments on vented explosion of H2-air mixtures in a vessel with two symmetrical vents were conducted to investigate: • internal and external flame behavior • internal and external pressure buildup • the difference between single and two vents with same total vent area

  5. Experimental setup Cylindrical vessel (diameter and length: 25 cm) Pressure transducer Quartz window 10-cm-long neck 7cm × 7cmvent PT1- PT3 : pressure transducer

  6. Orifice plate Experimental conditions

  7. Results and discussion Flame evolution electrode • Flame distortion and cellularity occurs earlier for larger vent area.

  8. Results and discussion Flame evolution • Flame acceleration due to venting was observed towards the vent but not in the opposite direction.

  9. Results and discussion Effect of vent number on flame evolution and pressure history • The use of two vents leads to the earlier cellular flame but no obvious difference in the internal pressure histories.

  10. Results and discussion Effect of vent area on internal overpressure • The maximum overpressure decrease with the increase of vent area. • No significant change of the maximum overpressure occurs when two vents with the same total vent area are used.

  11. Results and discussion Effect of vent area on the external flame length • The maximum external flame length increases with the increase of vent area. • The use of two vents decrease the external flame length.

  12. Results and discussion External pressure histories • External explosion occurs earlier for larger vent area. • No monotonic trend of the maximum external overpressure over vent area was found.

  13. Results and discussion Effect of external explosion on internal pressure • Turbulent oscillation of the internal pressure due to external explosion was observed for larger vent areas.

  14. Conclusions • Larger vent area leads to the earlier occurrence of flame distortion, flame cellularity and external explosion. • The maximum internal overpressure decrease with the increase of vent area. • Compared with the case of one vent, the use of two vents with same total vent area leads to nearly unchanged maximum internal and external overpressures but much smaller external flame length.

  15. Acknowledgments The authors would like to acknowledge the funding from the National Natural Science Foundation of China (No. 51276177), Innovation and Entrepreneurship Training Program of China (No. 201310361073) and HySEA (Grant no. 671461) through the European Commission’s “Fuel Cells and Hydrogen 2 Joint Undertaking”.

  16. Thanks for your attention

More Related