1 / 47

Hydraulic Cover Stones (HCS)

Hydraulic Cover Stones (HCS). By Dave Derrick, Potomologist & VP, River Research & Design, Inc. THIS METHOD IS A DAVE DERRICK DISCOVERY (DDD). Hydraulic Cover Stones (HCS).

golston
Download Presentation

Hydraulic Cover Stones (HCS)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Hydraulic Cover Stones (HCS) By Dave Derrick, Potomologist & VP, River Research & Design, Inc.

  2. THIS METHOD IS A DAVE DERRICK DISCOVERY (DDD)

  3. Hydraulic Cover Stones (HCS) Hydraulic Cover Stones (HCS) are typically large single stones placed in a flowing channel with the crest of the stone within inches of the base flow water surface elevation. The constant movement & rippling of the water from the Hydraulic Cover Stones results in a type of cover, “hydraulic cover”, masking fish location from the view of predators. The stones also provide resting areas & within-channel refugia for fish during high energy, high-flow events. Hydraulic Cover Stones are especially useful in sections of the stream with little in-channel structure, or vegetative cover, or undercut banks.

  4. Hydraulic Cover Stones (HCS) Large single stones placed in a flowing channel. Three versions: 1.) Top of the stone set at an elevation slightly lower than the typical base-flow water surface elevation. When sited correctly, the accelerated flow over the top of the stone will change from subcritical to supercritical flow, & immediately downstream back to subcritical (usually with a weak hydraulic jump). The hydraulic jump will entrain air & help aerate the stream. 2.) Stone crest set just below the base flow water surface elevation results in an acceleration of the water moving over the top of the stone, with “standing waves” (stationary waves) forming downstream of the stone. 3.) Stone crest set slightly above the base flow water surface, resulting in a V-shaped wake and flow split with a double return eddy flow pattern DS of the stone. However, these emergent stones might be used as perches for predators.

  5. Hydraulic Cover Stones provide improved aquatic habitat Hydraulic Cover Stones shown functioning 3 different ways. Graphics courtesy of Ecology & Environment, Inc.

  6. UNKNOWN AGE – Looking US @ a boulder acting as a HCS. Split flow, acceleration, air entrainment, & dead water DS of boulder. UNKNOWN AGE – CEDAR RIVER, SEATTLE, WA-DERRICK 8-22-2012

  7. Functions of Hydraulic Cover Stones • Provides micro-topography (scour & deposition) • Provides diversity of velocities • Provides “hydraulic cover” turbulence, surface water disturbance (boat wake), return currents, eddy fences, internal distortion, pressure zones, undulating surface water, standing waves, etc. • Provides feeding lanes for fish • Provides shape cover & solid substrate for benthics • Provides refugia during high flow events • Dissipates energy • Can aerate water, or de-gas super-saturated water

  8. Boulder Clusters typically consist of a number of very large stones closely arranged in some type of pattern. The Boulder Cluster usually blocks a fair amount of the stream, with stone crest heights 2 to 3 ft above the base flow water surface elevation. Hydraulic Cover Stones are single large stones with the crest heights within inches of the base flow water surface elevation. HCS block a very small percentage of the cross-section of the stream.

  9. (Purloined from Andrew Burg) Shadow depositional sand bar splits flow, resulting in both banks eroding in a straight stretch. Little Sugar Creek one year after placement (1998). This was not the designer’s intent. Some concerns with Boulder Clusters (cluster too wide & tall here in a high bed-load stream)

  10. (www.E-senss.com) • Possible Problems with Boulder Cluster designs: • 1. Excessive scour buries boulder • 2. Cluster blocks large percentage of stream flow • 3. Cluster redirects stream energy in unwanted direction (s) • Excessive deposition DS of cluster • Cluster too high, provides perches for predators/fishermen

  11. Flow Natural Hydraulic Cover Stones (HCS) on the Genesee River, Letchworth Park, NY photo taken 2003. Hydraulic Cover Stone at Elton Creek, NY Flow

  12. Hydraulic Cover Stones on Eighteenmile Creek Project, Newfane, NY(constructed Sept. 2003)

  13. My sneaker Close-up of large stones to be used as HCS, these were hand selected, minimum 3 ft by 3 ft.

  14. A Hydraulic Cover Stone (HCS) dug into the stream bed substrate for stability. The downstream wake is the “Hydraulic Cover”. Flow HCS

  15. In a sand-silt bed stream, deeper excavation, or reinforcement of the substrate, might have to be accomplished so that bed scour does not cause the HCS to sink into the substrate. Flow HCS

  16. Here comes Jimmy with a Hydraulic Cover Stone (HCS)!! Water depths were measured & the correct thickness of stone selected for this specific location

  17. Water depth was measured, & a specific sized rock delivered

  18. Carefully placing the Hydraulic Cover Stone

  19. Bed was dug & stone placed in hole. Sediment near stone acting as a dye trace. Flow

  20. First HCS placed in Eighteenmile Cr., turbulence, energy dissipation, eddy fences… Flow

  21. Looking DS, note locations of Hydraulic Cover Stones during unusually low flow conditions

  22. Crazy turbulence surrounds a HCS

  23. Trio of Hydraulic Cover Stones working beautifully, note those wakes (the hydraulic cover) Locals say this is the best fishing area in the creek (US of Cover Stones) This is a cobble-bed stream. This technique might not work as well in a sand-bed stream (stones could subside)

  24. HCS using up stream energy & entraining air into flowing water

  25. Flow from left to right, note the hydraulic jump @ the Hydraulic Cover Stone

  26. Same Hydraulic Cover Stone, close up Looking US at a Hydraulic Cover Stone

  27. Multi-Use Hydraulic Cover Stones, in this case a fisherman’s resting rock, (FRR)

  28. Salmon fishermen concentrating efforts among the Hydraulic Cover Stones, Eighteenmile Creek, Newfane, NY, Oct 2003

  29. Fish those Hydraulic Cover Stones !!!!!!!!

  30. NO NEED FOR A NET (if you’re good) (FISH ON !!!)

  31. On Saturday 10-19-03 (during the salmon run) folks are everywhere, 353 recreators by 9:30am.

  32. Hydraulic Cover Stones on Cattaraugus Creek @ Savage Road, Sardinia, New York

  33. Hydraulic Cover Stones for stable pre-dug “Pocket” scour holes in shallow areas (riffles & shallow runs) • Increases depths • Provides microtopography • Provides diversity of velocities • Provides hydraulic cover • Provides shape cover • Provides in-channel refugia • Dissipates stream energy

  34. Catt Creek, looking US at riffle-run, measuring how high the Hydraulic Cover Stone will jut into current.

  35. Hydraulic Cover Stone in pre-dug scour hole, stones measured to fit

  36. Looking US at a series of Hydraulic Cover Stones, took 50 minutes to install 9 stones

  37. Looking DS at same Hydraulic Cover Stones located in “run” section of stream. Previous condition was shallow sheet-type flow

  38. Mini-Case Study: 1 of 3 Stone is here A close look at a hard working Hydraulic Cover Stone during a high water event, Cattaraugus Cr. at Savage Rd. 11/4/2004

  39. Mini-Case Study: 2 of 3 But relatively calm right at the Hydraulic Cover Stone, energy dissipated!! Downstream of HCS fierce currents (water piling up on hip boots & bent pole)

  40. Mini-Case Study: 3 of 3 Same Hydraulic Cover Stone during base flow conditions, not very impressive considering observed function during high flow

  41. Hydraulic Cover Stone Quick & Dirty Flume Tests @ UB On 11-11-2010 a series of short test runs were performed on a small 4 inch wide sand-bed hydraulic flume @ the State University of New York at Buffalo (UB). Flow duration ranged from 20 minutes to 45 minutes or so. Flow stage was supposed to mimic the Q-2 flow, but varied when we forgot to turn on the inflow hose & add water as the flume leaked. Our feet got wet. Discharge was varied a bit & not written down. Otherwise very scientific!!

  42. Looking US @ the flume & flume-meister, Dr. Sean Bennett SEAN BENNETT’S FLUME @ UB – ENTIRE FLUME - PIX DAVE DERRICK 11-11-2010

  43. THE EFFECTS OF STONE SIZE & ROUGHNESS ON NEAR-FIELD SCOUR AROUND A SINGLE HYDRAULIC COVER STONE

  44. Looking @ 3 Hydraulic Cover Stones. The upstream stone is small & aerodynamic resulting in very little scour. More scour as each downstream HCS is progressively larger & blocks more flow SEAN BENNETT’S FLUME @ UB – HYDRAULIC COVER STONES-DERRICK 11-11-10

  45. Looking @ a single HCS. The US face of the stone is square & vertical. Scour was so great US of the stone that it fell US into its scour hole!!! LESSON: SIZE & SHAPE MATTER GREATLY! SEAN BENNETT’S FLUME @ UB – HYDRAULIC COVER STONES-DERRICK 11-11-10

  46. This PowerPoint presentation was developed & built by Dave Derrick. Any questions or comments, call my personal cell @ 601-218-7717, or email @ d_derrick@r2d-eng.comEnjoy the information!!

  47. Speaking of size, presented here is Jackson Danger Rainer wearing Uncle Brent’s huge size 14 sneakers

More Related