1 / 20

Fuel Cell Technology Status, Challenges, and Opportunities

Fuel Cell Technology Status, Challenges, and Opportunities. Meilin Liu School of Materials Science &Engineering Georgia Institute of Technology Atlanta, GA 30332-0245 Presented to Electrical Energy Systems and Sustainability Workshop Georgia Tech November 29 – December 1, 2000. Outline.

gloriah
Download Presentation

Fuel Cell Technology Status, Challenges, and Opportunities

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Fuel Cell TechnologyStatus, Challenges, and Opportunities • Meilin Liu • School of Materials Science &Engineering • Georgia Institute of Technology • Atlanta, GA 30332-0245 • Presented to • Electrical Energy Systems and • Sustainability Workshop • Georgia Tech • November 29 – December 1, 2000 Georgia Tech - SSI&EC

  2. Outline • Introduction • Polymer Electrolyte Membrane Fuel Cells • Current technology • Applications: Portable/vehicle • Challenges/opportunities • Solid Oxide Fuel Cells (SOFCs) • Current technology • Applications:Stationary/distributed/EV • Challenges/opportunities • Concluding Remarks Georgia Tech - SSI&EC

  3. Schematic of an individual fuel cell Load e’ Fuel in Oxidant in O2 H2 H+ H2 H2O Anion O2 H2O conductor Electrolyte (Ionic conductor) Depleted oxidant Depleted fuel Anode Cathode Georgia Tech - SSI&EC

  4. Advantages of Fuel CellsOver conventional Technologies • High efficiency Internal combustion engine: <30% Fuel cell: 50% electrical, 85% overall (SOFC) • Environmental friendly Emits H2O or CO2 without pollutants Emits as much as 60% less CO2 than coal plant • Noise-free and no site restriction No mechanical friction or moving parts Georgia Tech - SSI&EC

  5. PEMFCs: Challenges & Opportunities Efficient catalysts insensitive to impurities in the fuel such as CO; Efficient catalysts that promote a high rate of oxygen reduction; Alternative catalysts less expensive than Pt to reduce the cost. Georgia Tech - SSI&EC

  6. End Plate Anode Electrolyte Cathode Bipolar Separator Repeating unit Anode A Planar Solid Oxide Fuel Cell Georgia Tech - SSI&EC

  7. A Tubular Solid Oxide Fuel Cell Georgia Tech - SSI&EC

  8. b 1m 4m Characteristics of GDC Powder by GNP Large surface area Compositional homogeneity Easy to densify 92% at 1250oC/5 hrs 95% at 1350oC/5 hrs Loose agglomerates Foam-like structure Fill density 0.059 g/cm3 120th of theoretical value Georgia Tech - SSI&EC

  9. 10m cathode GDC film electrolyte anode Substrate 30m ~8 m ~15 m Microstructures of Dry-Pressed Films Georgia Tech - SSI&EC

  10. Porous SSC and 10 v%SDC Cathode A single cell cathode electrolyte 2m anode 30m Dense SDC Porous Ni-SDC Anode 2m 2m SOFCs Fabricated by Screen-Printing Georgia Tech - SSI&EC Changrong Xia, Fanglin Chen and Meilin Liu, Electrochemical and Solid State letters, 4(5) A52-A54 (2001).

  11. Single cell performance of SDC-electrolyte SOFC Georgia Tech - SSI&EC

  12. Significance of Interfacial Resistances Georgia Tech - SSI&EC

  13. SOFCs: Challenges & Opportunities • New electrolytes with high ionic conductivities at low temperaturesinexpensive materials,longer life; • Nonstructural electrodes and interfaces to enhance performance, especially anodes for alternative fuels; • Cost-effective fabrication processes to dramatically reduce the cost; $4,000$400/KW; • Efficient catalysts insensitive to impurities in the fuel such as H2S. Georgia Tech - SSI&EC

  14. Mesoporous Materials Meso-porous materials---porous inorganic solids with pore size 2-50nm Preparation -- surfactant templating mechanism Surfactant Inorganic precursor Remarkable properties: Narrow pore size distribution Pore size tunable (from 2nm to 50 nm) Large surface area (~1000 m2/g) Applications: Catalysis, selective separations, absorption medium, sensors, Electrodes for lithium batteries, fuel cells, and gas sensors. Georgia Tech - SSI&EC

  15. Formation of Mesoporous SnO2 Tin chloride Cetyltrimethylammonium bromide Electrostatic interaction Aging Micelle formation S+I- interaction Calcining TEM image of SnO2 Georgia Tech - SSI&EC

  16. Preparation of Mesoporous YSZ-NiO ( P E O ) ( P P O ) ( P E O ) m n m (Surfactant) Z r O C l + + N i C l YCl 2 2 3 (Inorganic species) -PEO -PPO Cl Cl R O H H O Y Cl Y 3 R Cl + R O YCl H Cl 2 H O 2 H O YCl + H O R 2 Georgia Tech - SSI&EC

  17. TG-DSC, XRD of Mesoporous YSZ-NiO x o—YSZ x—NiO x x o o x o o o o Georgia Tech - SSI&EC

  18. TEM and BET of Mesoporous YSZ-NiO 108 m2/g 4.5 nm TEM BET Georgia Tech - SSI&EC

  19. 500 nm Polystyrene Spheres Sr0.5Sm0.5CoO3 500 nm Micrographs of PS & Sr0.5Sm0.5CoO3 Georgia Tech - SSI&EC

  20. Concluding Remarks • Fuel Cells are the most efficient/cleanest technology for conversion of chemical to electrical energy; • PEMFC and SOFC are the most versatile system for various applications; • Cost reduction is the key to successful commercialization of fuel cells; • Fuel cells will significantly influence our everyday life in the years to come. Georgia Tech - SSI&EC

More Related