1 / 22

How to Control Repetitive Hand and Wrist Tasks

How to Control Repetitive Hand and Wrist Tasks. Overview:. The hands and wrists are made up of a variety of fragile bones, nerves, blood vessels, tendons and ligaments that can be easily damaged if they are misused. . Overview:.

georgette
Download Presentation

How to Control Repetitive Hand and Wrist Tasks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How to Control Repetitive Hand and Wrist Tasks

  2. Overview: • The hands and wrists are made up of a variety of fragile bones, nerves, blood vessels, tendons and ligaments that can be easily damaged if they are misused.

  3. Overview: The following are some of the conditions that can cause hand and wrist illnesses: • Frequent or repetitive movement of the hand or wrist, usually associated with awkward wrist angulations • Inappropriate tool and equipment design • Vibrating knives and saws • Poor work station design and arrangement • Cold environments

  4. Reduce Repetitions and Automate • Reduce the number of repetitions per shift • For example, improve the layout of the work station • Try to semi or fully automate

  5. Neutral Wrist • Maintain neutral (handshake) wrist position. Straight wrist (Good) Bent wrist (Bad)

  6. Neutral Wrist Bad Good Bad Good

  7. Bend the tool, not the wrist Bent Handled Tool Examples

  8. Reduce Flexion or Deviation of Wrist • Design tasks and select tools to reduce extreme flexion or deviation of the wrist

  9. Avoid Forearm Rotation • Avoid inward or outward rotation of the forearm when the wrist is bent to minimize elbow disorders

  10. Reduce Wrist Force • Reduce force or pressure on the wrists and hands. • For example, any task or tools that generate a bent wrist when used.

  11. Reduce Wrist Force • Reduce force or pressure on the wrists and hands. • Don’t use short handled pliers and tools with finger grooves that do not fit the worker’s hand

  12. Reduce Weight and Size • Where ever possible, reduce the weight and size of objects that must be handled repeatedly.

  13. Use Tool Counter-balance • Use a counter-balance support for larger, heavier tools.

  14. Avoid Pounding and Pressing • Avoid repeated pounding with the base of the hand • Avoid repetitive, forceful pressing with the finger tips

  15. Use Power Grip • Design tasks so that a power rather than a pinch grip can be used to grasp materials. • A pinch grip is five times more stressful than a power grip. • The greater the effort to maintain control of a hand tool, the higher the potential for injury.

  16. Minimize Reach • Avoid reaching more than 15 inches in front of the body. • To minimize shoulder disorders, avoid reaching above shoulder height, below waist level or behind the body

  17. Avoid Arm Extension • Avoid repetitive work that requires the elbow held straight and the arm extended • Provide support devices where awkward body postures such as elevated hands or elbows and extended arms must be maintained.

  18. Reduce Vibration • Select power tools and equipment that controls vibration to the hands, or reduce the time or need to hold vibrating tools.

  19. Gloves • Provide protection for the hands from cold. Furnish a selection of gloves sizes and counsel workers about over-gripping while wearing gloves.

  20. Optimal Grip Span • Optimum grip spans for pliers, scissors, or tongs, measured from the fingers to the base of the thumb, range from 2.3 to 3.5 inches.

  21. Handle Diameters • The recommended handle diameters for circular-handle tools such as screwdrivers are 1.25 to 2 inches when a power grip is required, and 0.3 to 0.6 inches when a precision finger grip is needed.

  22. Thank you for taking the time to learn about safety and health and how to prevent injuries and illnesses.

More Related