1 / 1

Plugs Into CN61 on indoor PCB

6. 5. 4. 3. 2. 1. Adaptor For Run/Fault Indication & Remote On/Off For VRF, DI & SDI( Part Number TRF ). FAULT SIGNAL. For Run / Fault Indication. COM (+12VDC). RUN SIGNAL. 6. Local on/off prohibit.

geordi
Download Presentation

Plugs Into CN61 on indoor PCB

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 6 5 4 3 2 1 Adaptor For Run/Fault Indication & Remote On/Off For VRF, DI & SDI( Part Number TRF ) FAULT SIGNAL For Run / Fault Indication COM (+12VDC) RUN SIGNAL 6 Local on/off prohibit Used For Remote on/off (jumper 01 on master PCB must be cut – otherwise it responds to pulse) & local on/off control prohibit COM (Volt Free) 5 ON/Off Control 6 5 Plugs Into CN61 on indoor PCB 4 4 3 3 2 1 no 2 nc 1 Max 10m between indoor PCB and relay ( Field Supplied ) Field supply relay Notes. When contact 1 – 2 made unit on with full use of remote controller ie on / off button works. During heating on signal (2 – 3 made) remote controller is completely locked. When heating signal off unit automatically restarts. Heating signal

More Related