1 / 11

ISO 9000 - An introduction Part 3

ISO 9000 - An introduction Part 3. P. B. Dhanish Mechanical Engineering Department National Institute of Technology, Calicut Email:dhanish@nitc.ac.in. Phone: (0495) 2286401(O), 2286415(D), 2440283(R). http://www.nitc.ac.in. ISO 9001:2000 - Quality management systems - Requirements.

genera
Download Presentation

ISO 9000 - An introduction Part 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ISO 9000 - An introductionPart 3 P. B. Dhanish Mechanical Engineering Department National Institute of Technology, Calicut Email:dhanish@nitc.ac.in Phone: (0495) 2286401(O), 2286415(D), 2440283(R) http://www.nitc.ac.in

  2. ISO 9001:2000 - Quality management systems - Requirements 1. Quality management system 2. Management responsibility 3. Resource management 4. Product realization 5. Measurement, analysis and improvement

  3. 1. Quality management system • General requirements • Identify the processes • Documentation requirements • Quality policy, objectives, manual • Control of documents, records

  4. 2. Management responsibility • Management commitment • Customer focus • Quality policy • Planning • Responsibility, authority and communication • Management review

  5. 3. Resource management • Provision of resources • Human resources • Infrastructure • Work environment

  6. 4. Product realization • Planning of product realization • Quality plans • Customer related processes • Product requirements • Contract review • Design and development • Planning, inputs, outputs, review

  7. 4. Product realization… • Control of monitoring and measuring devices • Calibration

  8. 5. Measurement, analysis and improvement • Monitoring and measurement • Customer satisfaction, Internal audit, processes, product • Control of nonconforming product • Analysis of data • Improvement • Corrective action, preventive action

  9. Ten steps to ISO 9000 1. Develop a quality policy and objectives for quality 2. Identify the responsibilities and authorities of personnel 3. Plan and implement a system to meet objectives 4. Document the system 5. Carry out internal audit to identify gaps in the system, if any

  10. Ten steps to ISO 9000 ... 6. Take corrective and / or action to close the gaps 7. Review the system and improve continuously by repeating the above steps 8. Select suitable certifying body and get documentation review done 9. Pre-assessment audit, corrections 10. Certification audit, receive certificate

  11. Conclusion: • Utilise ISO 9000 for improving your profits, quality, productivity!

More Related