1 / 26

Unit 35

Unit 35. Plumbing by Dale Conrady. Objective. To identify plumbing materials and perform basic plumbing procedures. Competencies. Identify plumbing tools Identify and select pipe Identify common pipe fittings Assemble pipe Maintain water systems. Bench yoke vice Chain vice

gail
Download Presentation

Unit 35

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Unit 35 Plumbing by Dale Conrady

  2. Objective • To identify plumbing materials and perform basic plumbing procedures

  3. Competencies • Identify plumbing tools • Identify and select pipe • Identify common pipe fittings • Assemble pipe • Maintain water systems

  4. Bench yoke vice Chain vice Chain wrench Pipe wrench Hacksaw File Pipe Cutter Reamer Tubing cutter Tap and Dies Flaring tool Flaring Block Channel Locks Tools

  5. Identification • The nominal, or identifying size of pipe is generally based on the inside diameter. (ID) and outside diameter, (O D) Common sizes used for home or farm are 1/4, 3/8, 1/2, 3/4, 1, 1 1/4 1 1/2, 2, 2 1/2, 3, 4, 6 inch

  6. Steel Pipe • Black or Galvanized • Black pipe is painted and has very little resistance to rust. • Galvanized pipe is coated with zinc inside and out and has very good resistance to rust.

  7. Classification • Standard has a specific ID and OD • Extra Heavy and Double extra heavy have heavier walls, although the OD remains the same the ID changes. • All standard fittings will work with the 3 different styles of pipe

  8. Copper Tubing • Pipe made of copper is frequently referred to as tubing. • This tubing is soft and can be bent around irregular shapes so that it can be installed easily. It is preferred to steel because it resist corrosion.

  9. Disadvantages • High initial cost • High degree of expansion • Bad taste and green stains if the water is slightly acidic

  10. Classification • Type k is the heaviest • Type L is medium • Type M is the lightest

  11. Joining • Copper pipe may be joined in three ways. • 1. Soldering • 2. Flaring • 3. Compression

  12. Plastic Pipe • Plastic is the easiest type of pipe to install. • The term plastic is used to include all pipe made of synthetic materials.

  13. Types of Plastic • PVC (Polyvinyl Chloride) • Used for cold water or waste water applications • CPVC (Chlorinated Polyvinyl Chloride) used for hot water applications • ABS (Acrylonitrite Butadiene Styrene) used for underground applications

  14. Types • PE (polyethlene) used for pump installation, underground, surface installations. Cold water applications only.

  15. Joining • CPVC, PVC and ABS all are joined by gluing. • PE must have hose barbs and band clamps

  16. Cast Iron • Sewer installations • Available in sizes from 2 in to 6 in. • Single Hub or Double Hub

  17. Joining • Oakum and lead • Neoprene gaskets

  18. Pipe Selection • Each kind of pipe has advantages and disadvantages. When making repairs it is generally easier to repair systems with the kind of pipe used in the original installation.

  19. New Installations • When planning a new system, it is important to consider the relative merits of each kind of pipe.

  20. Soldering Copper

  21. Gluing Plastic

  22. Drains

  23. Sink Faucet

  24. Tub Faucet

  25. Valve

  26. Pipe Fittings

More Related