1 / 9

Presentation on

Presentation on. Electrical measurements & measuring instruments. Galvanometer is a PMMC instrument designed to be sensitive to extremely low current levels. The simplest galvanometer is a very sensitive instrument with the type of center-zero scale.

gabby
Download Presentation

Presentation on

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Presentation on Electrical measurements & measuring instruments

  2. Galvanometer • is a PMMC instrument designed to be sensitive to extremely low current levels. • The simplest galvanometer is a very sensitive instrument with the type of center-zero scale. • The torque equation for a galvanometer is exactly as discussed in the previous section. • The most sensitive moving-coil galvanometer use taut-band suspension, and the controlling torque is generated by the twist in the suspension ribbon.

  3. With the moving-coil weight reduced to the lowest possible minimum for greatest sensitivity, the weight of t he pointer can create a problem. The solution is by mounting a small mirror on the moving coil instead of a pointer.

  4. The mirror reflects a beam of light on to a scale. This makes light-beam galvanometers sensitive to much lower current levels than pointer instruments • Current sensitivity galvanometer • Voltage sensitivity galvanometer • Galvanometers are often employed to detect zero current or voltage in a circuit rather than to measure the actual level of current or voltage.

  5. DC Ammeter • is always connected in series • low internal resistance • maximum pointer deflection is produced by a very small current • For a large currents, the instrument must be modified by connecting a very low shunt resister • Extension of Ranges of Ammeter • Single Shunt Type of Ammeter

  6. Example 4.1: An ammeter as shown in Figure 3-9 has a PMMC instrument with a coil resistance of Rm = 99 and FSD current of 0.1 mA. Shunt resistance Rs = 1. Determine the total current passing through the ammeter at (a) FSD, (b) 0.5 FSD, and 0.25 FSD

  7. Swamping Resistance • The moving coil in a PMMC instrument is wound with thin copper wire, and its resistance can change significantly when its temperature changes. • The heating effect of the coil current may be enough to produce a resistance change, which will introduce an error. • To minimize the error, a swamping resistance made of manganin or constantan is connected in series with the coil (manganin and constantan have resistance temperature coefficients very close to zero.

  8. The ammeter shunt must also be made of manganin or constantan to avoid shunt resistance variations with temperature. • Multirange Ammeters • Make-before-break switch • The instrument is not left without a shunt in parallel with it. • During switching there are actually two shunts in parallel with the instrument.

More Related