1 / 7

Coating R&D at LMA: Q mechanical measurement of multilayer Ti:Ta 2 O 5 – SiO 2 coating

Coating R&D at LMA: Q mechanical measurement of multilayer Ti:Ta 2 O 5 – SiO 2 coating. Emeline Saracco , Raffaele Flaminio, Janyce Franc, Christophe Michel, Nazario Morgado, Laurent Pinard. Q mechanical measurement at LMA. 1. Q measurement of welded cantilever before coating

fredericaj
Download Presentation

Coating R&D at LMA: Q mechanical measurement of multilayer Ti:Ta 2 O 5 – SiO 2 coating

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Coating R&D at LMA: Q mechanical measurement of multilayer Ti:Ta2O5 – SiO2 coating Emeline Saracco, Raffaele Flaminio, Janyce Franc, Christophe Michel, Nazario Morgado, Laurent Pinard Elba - GWADW - 25th May 2011

  2. Q mechanical measurement at LMA 1. Q measurement of welded cantilever before coating => The use of cantilevers welded to Silica block allows an improved Q measurement sensitivity Silica block 45 mm 5 mm Silica cantilever (110 µm thick) 2. Coating Deposition in Ion beam Sputtering (IBS) deposit chamber on the welded cantilevers - Low index material (L): SiO2 - High index material (H): Ti:Ta2O5 3. Q measurement of the cantilever after coating deposition and annealing Energy stored in the substrate => Calculation of coating and Ti:Ta2O5 loss angle Energy stored in the coating Elba - GWADW - 25th May 2011

  3. Problem: Q mechanical measurement of Ti:Ta2O5 in multilayer coatings SiO2/Ti:Ta2O5 18-layer on a SiO2 substrate Ti:Ta2O5 monolayer on a SiO2 substrate Last SiO2 layer ~ 220 nm Ta2O5 layer Ta2O5 monolayer ~ 75 nm X 8 SiO2 layer Thickness ~ 500 nm ~ 258 nm 1st Ta2O5 layer SiO2 substrate ~ 130 nm Thickness ~ 110 µm SiO2 substrate ~ 110 µm ΦTi:Ta2O5 = 2.3x10-4 +/- 0,6x10-4 Φcoating = 2,1x10-4+/- 0,2x10-4 = > ΦTi:Ta2O5 = 4.7x10-4 +/- 0,2x10-4 (hypothesis : ΦSiO2 = 5x10-5) May 2010 (J. Franc, GWADW Kyoto) “Mechanical losses of different multilayer coatings with no defects have been measured and confirm larger losses than expected” For a 26-layer coating 0.8167H (1.0736L 0.8828H)12 0.085L @ 1064nm : -> LMA mesurement : ΦTi:Ta2O5=4,2x10-4 +/- 0,2x10-4 -> TNI mesurement : ΦTi:Ta2O5=3,8x10-4 +/- 0,4x10-4 Same trend as TNI observation and calculation G-1000937 Elba - GWADW - 25th May 2011

  4. First hypothesis: the layer thickness of Ti:Ta2O5 Study of Mechanical losses as a function of Ti:Ta2O5 monolayer thickness: Dec. 2010 – Jan. 2011 Measurement Three thicknesses studied on six cantilevers for the 3 first modes : - 126 nm - 250 nm - 512 nm => No significant tendency of Ti:Ta2O5 thickness influence on mechanical losses for a monolayer Elba - GWADW - 25th May 2011

  5. Second hypothesis: interfaces in the multilayer Study of Mechanical losses as a function of interface number: Dec. 2010 – May 2011 Measurement Direct comparison: 18-layer coating (H0.675B)4 multilayer bilayer monolayer => For a same Ti:Ta2O5 layer thickness, mechanical losses are higher in multilayer coating than in monolayer Elba - GWADW - 25th May 2011

  6. Second hypothesis: interfaces in the multilayer Study of Mechanical losses as a function of interface number: 2006-2011 Measurement Direct comparison: => Tendency of augmentation of Ti:Ta2O5 mechanical losses with interface number Elba - GWADW - 25th May 2011

  7. Conclusion and future work • Conclusion: • - No effect of Ti:Ta2O5 layer thickness on mechanical losses for Ti:Ta2O5 monolayer • Possible influence of SiO2/Ti:Ta2O5 interfaces on multilayer coating mechanical losses • Perspectives: • - Physicochemical characterization of SiO2/Ti:Ta2O5 interfaces: • Transmission Electron Microscopy (TEM): Study of SiO2 /Ti:Ta2O5 interfaces at atomic structure level • Electron Energy Loss Spectroscopy (EELS): Chemical characterization of SiO2 /Ti:Ta2O5 multilayer coating and interface : interdiffusion? Elba - GWADW - 25th May 2011

More Related