1 / 33

Seismic Refraction Exercise for a Hydrogeology Course

Seismic Refraction Exercise for a Hydrogeology Course. Devin Castendyk State University of New York, College at Oneonta. Basic hydrogeologic questions. How deep is the water table? What is the stratigraphy below a site?. Traditional solution:. Drill several boreholes & install wells:

fransen
Download Presentation

Seismic Refraction Exercise for a Hydrogeology Course

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Seismic Refraction Exercise for a Hydrogeology Course Devin Castendyk State University of New York, College at Oneonta

  2. Basic hydrogeologic questions • How deep is the water table? • What is the stratigraphy below a site?

  3. Traditional solution: Drill several boreholes & install wells: Expensive ($500-$2000 per well) Labor Intensive Time If site is contaminated: Disposal of contaminated core Clean equipment

  4. What students need to know • What are seismic waves? • Useful property: Waves travel at different velocities • True of different phases (e.g. solid, liquid, and gas) • True of different Earth materials: • Dry soil (vadose zone) ~ 1000 ft/sec • Wet soil (phreatic zone)~ 5000 ft/sec • Shale = 7000-9000 ft/sec • Sandstone = 8000-12,000 ft/sec • Granite > 17,000 ft/sec • If we can measure the velocity of seismic waves versus depth, we can define the water table and infer the stratigraphy at depth without intrusive methods.

  5. Objective: Depth Velocity Interpretation 0-10 ft 1000 ft/sec Unsaturated Soil Water Table 10-20 ft 5000 ft/sec Saturated Soil > 20 ft 12,000 ft/sec Bedrock

  6. How to measure the composition of a 1-layer, homogeneous site • Place a geophone (mini-seismometer) at a known distance from a seismic source • Generate a seismic wave • Measure the time it takes the P-Wave to move from the source to the geophone • Calculate and interpret the velocity:

  7. How to address 2-layered site using seismic refraction • Step 1: Use multiple geophones (an array) typically spaced equal distances apart (e.g. 10 feet) • Step 2: Generate a seismic wave • Interpret results

  8. Set up the geophone array Geophone

  9. “Bison Digital Instantaneous Floating Point Signal Stacking Seismograph”

  10. Make an artificial seismic wave THUD!

  11. Borehole explosion

  12. Thumper truck

  13. Shotgun blast

  14. Sledge hammer

  15. Sledge hammer

  16. How seismic waves refract • Time 1: • Direct wave travels in all directions from source • Vibrations from Layer 1 arrive at closest geophone (1) 10 9 1 2 3 4 5 6 7 8 Soil Bedrock

  17. How seismic waves refract • Time 2: • Wave front reaches layer boundary • Vibrations from Layer 1 recorded by next closest geophone (2) 10 9 1 2 3 4 5 6 7 8 Soil Bedrock

  18. How seismic waves refract • Time 3: • Wave front travels faster through Layer 2 (bedrock) than Layer 1 (soil). • This causes the interface between the layers to vibrate in advance of the wave front in Layer 1 (seismic refraction). • Waves generated by the interface travel back to surface. 10 9 1 2 3 4 5 6 7 8 Soil Refracted Wave Bedrock

  19. How seismic waves refract • Time 4: • Refracted waves reach geophones ahead of direct waves from source. 10 9 1 2 3 4 5 6 7 8 Soil Refracted Wave Bedrock

  20. Raw data Seismic Refraction, SUNY Oneonta, May 2006 Geophone Number P-Wave Arrival Time (milliseconds)

  21. Data analysis Step 1: Pick P-Wave arrival times (first deviation) Step 2: Graph arrival time versus distance

  22. Pit P-wave arrival times Seismic Refraction, SUNY Oneonta, May 2006 Geophone Number P-Wave Arrival Time (milliseconds)

  23. Make a data table

  24. P-wave velocity calculations Step 3: Connect points corresponding to the same velocity Step 4: Calculate the velocity represented by each line

  25. v2=5000 ft/sec v1=1000 ft/sec v3=12,000 ft/sec

  26. Depth of boundary between Layer 1 and Layer 2 • Step 5: Calculate the depth of the interface between Layer 1 and Layer 2. The depth (z1) from the surface to the first interface is calculated using the following equation: Where Xc1 is the distance to the first intersecting velocity lines. This represents the distance from the source where the direct wave and the refracted wave arrive at the same time.

  27. v2=5000 ft/sec v1=1000 ft/sec v3=12,000 ft/sec Xc = 20 feet

  28. Depth of boundary between Layer 2 and Layer 3 • Step 6: Calculate the depth of the interface between Layer 2 and Layer 3. The depth (z2) from the surface to the first interface is calculated using the following equation: Where Xc2 is the distance to the first intersecting velocity lines.

  29. v2=5000 ft/sec v1=1000 ft/sec v3=12,000 ft/sec Xc2 = 50 feet Xc = 20 feet

  30. Final interpretation of stratigraphic column Depth Velocity Interpretation 0-10 ft 1000 ft/sec Unsaturated Soil Water Table 10-20 ft 5000 ft/sec Saturated Soil > 20 ft 12,000 ft/sec Limestone

  31. Conclusion • Seismic refraction is a useful tool in hydrologic investigations: • Identifies stratigraphy • Identifies the depth to water table • Non-intrusive: No contaminated soil to dispose of or equipment to clean • Inexpensive and time saving compared to borehole drilling • IT’S FUN!

More Related