1 / 20

Caterpillar Cat M316F Wheeled Excavator (Prefix F6N) Service Repair Manual (F6N00001 and up)

service repair manual

fkuseuidkkmm
Download Presentation

Caterpillar Cat M316F Wheeled Excavator (Prefix F6N) Service Repair Manual (F6N00001 and up)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Service Repair Manual Models M 316F WheeledExcavator

  2. w 1/21(W) Shutdown SIS Previous Screen Product: WHEELED EXCAVATOR Model: M316F WHEELED EXCAVATOR F6N Configuration: M316F Wheeled Excavator F6N00001-UP (MACHINE) POWERED BY C4.4 Engine Disassembly and Assembly M314F, M316F, M318F, M320F and M322F Wheeled Excavator Power Train Media Number -UENR6143-07 Publication Date -01/03/2018 Date Updated -13/03/2018 i06217779 Transmission - Disassemble SMCS - 3150-015 Disassembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty 1P-0074 Slide Hammer Puller Gp 1 A 4C-5651 Threaded Adapter 1 B 136-1452 Retaining Ring Pliers As 1 C 5P-5197 Retaining Ring Pliers As 1 D 1P-1863 Retaining Ring Pliers 1 E 5F-7465 Puller Gp 1 6V-3010 Puller Gp 1 8B-7557 Threaded Adapter 2 F 126-7177 Puller Leg 2 126-7181 Sliding Plate 4 G 8H-0663 Bearing Puller Gp 1 H 9U-7289 Scale 1 Start By: a. Remove the transmission. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  3. w 2/21(W) NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. Illustration 1 g01136987 Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. 1. Remove plug (1) in order to drain the oil from the transmission into a suitable container. Evenly remove bolts (2) and remove housing (3). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  4. w 3/21(W) Illustration 2 g01136993 2. Remove seal (4) from housing (3). Illustration 3 g01136995 3. Remove springs (5) and (6). Illustration 4 g01137000 4. Remove spring (7), O-ring seal (8), and spool (9). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  5. w 4/21(W) Illustration 5 g01137027 5. Remove seal (10) from spool (9). Illustration 6 g01137040 6. Remove piston (11). Illustration 7 g01150446 7. Remove race (13) and thrust bearing (12). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  6. w 5/21(W) Illustration 8 g01150456 8. Remove race (14). Illustration 9 g01150462 9. Use Tooling (A) in order to remove piston (15). Illustration 10 g01137074 10. Remove seals (16) and (17) from piston (15). Remove pins (18) from piston (15). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  7. w 6/21(W) Illustration 11 g01137081 NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. 11. Remove ring (19). Illustration 12 g01137084 12. Remove spring (20) and ring (21). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  8. w 7/21(W) Illustration 13 g01137088 13. Remove seals (22), (23), and (24) from ring (21). Illustration 14 g01137089 14. Remove ring (25). Illustration 15 g01137095 15. Remove seal (26) from ring (25). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  9. w 8/21(W) Illustration 16 g01137103 16. Remove discs (27). Note: The thickness of discs (27) may vary. Illustration 17 g01137106 17. Remove discs (28). Illustration 18 g01137111 18. Remove washer (29). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  10. w 9/21(W) Illustration 19 g01150464 19. Use Tooling (B) in order to remove retaining ring (30). 20. Remove shaft (31) and gear (32) as an assembly. Illustration 20 g01137130 21. Remove retaining ring (33) and shim (34) from gear (32). Illustration 21 g01137133 22. Remove discs (35) from gear (32). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  11. w 10/21(W) Illustration 22 g01137136 23. Remove clutch discs (36) from gear (32). Note: The thickness of clutch discs (36) may vary. Illustration 23 g01137145 24. Use Tooling (B) in order to remove retaining ring (37). Remove shaft assembly (31). Illustration 24 g01137149 25. Use Tooling (C) in order to remove retaining ring (38) from shaft assembly (31). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  12. w 11/21(W) Illustration 25 g01137155 26. Use Tooling (D) in order to remove retaining ring (39) from shaft assembly (31). Remove race (40) from shaft assembly (31). Illustration 26 g01137164 27. Use a suitable press in order to remove washer (42) and ball bearing (41) from shaft assembly (31). Illustration 27 g01137169 28. Use a suitable press in order to remove ball bearing (41) from washer (42). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  13. w 12/21(W) Illustration 28 g01137172 29. Remove bearing (44) and race (43). Illustration 29 g01194426 30. Remove bolt (45A), speed sensor (45), bolts (46), and lubrication pump (47). Illustration 30 g01137179 31. Remove bolts (48) and washer (49). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  14. w 13/21(W) Illustration 31 g01150471 32. Use Tooling (E) in order to press gear assembly (50) from bearing cone (51). Illustration 32 g01150474 33. Remove bearing cone (51). Illustration 33 g01137187 34. Remove gear assembly (50). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  15. w 14/21(W) Illustration 34 g01137217 35. Remove bearing cone (52) from gear assembly (50). Note: Bearing cone (52) will be damaged when bearing cone (52) is removed. Illustration 35 g01137229 36. Remove spring pins (53) from gear assembly (50). Illustration 36 g01137242 37. Use Tooling (C) to remove retaining ring (54) and planetary pinion (55) from gear assembly (50). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  16. w 15/21(W) Note: Shim (56) and rollers (57) will fall when planetary pinion (55) is removed. Illustration 37 g01137244 38. Use Tooling (F) in order to remove inner race (58) from gear assembly (50). 39. Repeat Step 37 and Step 38 for the remaining planetary pinions. Illustration 38 g01137246 40. Remove bearing cup (59). Illustration 39 g01150588 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  17. Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL. NO WAITING NOTE: If there is no response to click on the link above, please download the PDF document first and then click on it.

  18. w 16/21(W) 41. Remove bearing cup (60). Illustration 40 g01150597 42. Remove seals (61) and (62). Illustration 41 g01150600 43. Remove bolts (63) and (64). Remove plate (65). Illustration 42 g01137273 44. Remove O-ring seal (66). Remove gear (67). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  19. w 17/21(W) Illustration 43 g01137280 45. Use Tooling (G) and a suitable press in order to remove plate (68) from gear (67). Illustration 44 g01137286 46. If it is necessary, remove studs (69) from gear (67). Illustration 45 g01150605 47. Remove seal (70). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

  20. w 18/21(W) Illustration 46 g01150612 48. Use Tooling (G) in order to remove pinion (71). Illustration 47 g01150614 49. Remove O-ring seal (72) and bushing (73) from pinion (71). Illustration 48 g01150616 50. Use Tooling (G) in order to remove bearing cone (74) from pinion (71). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020/3/7

More Related