1 / 4

Multran Requirements draft -jaclee-behave-v4v6-mcast-ps-02

Multran Requirements draft -jaclee-behave-v4v6-mcast-ps-02. Christian Jacquenet , France Telecom Mohamed Boucadair , France Telecom Jacni Qin, ZTE Tina Tsou , FutureWei Technologies Yiu Lee, Comcast IETF 81, Quebec City. Mohamed Boucadair ( mohamed.boucadair@orange-ftgroup.com )

filia
Download Presentation

Multran Requirements draft -jaclee-behave-v4v6-mcast-ps-02

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Multran Requirementsdraft-jaclee-behave-v4v6-mcast-ps-02 Christian Jacquenet, France Telecom Mohamed Boucadair, France Telecom Jacni Qin, ZTE Tina Tsou, FutureWei Technologies Yiu Lee, Comcast IETF 81, Quebec City Mohamed Boucadair (mohamed.boucadair@orange-ftgroup.com) Christian Jacquenet (christian.jacquenet@orange-ftgroup.com) Dean Cheng (chengd@huawei.com) Yiu Lee (yiu_lee@cable.comcast.com) IETF77, Anaheim

  2. Requirements • R1: Transition mechanisms to access content must be transparent to IPv4 and IPv6 receivers. • R2: Re-use existing multicast protocols (IGMP, MLD, PIM). • R3. Require a standardized address format forinterworking IPv4 and IPv6 multicast family addresses. • R4: Require IWF for control protocols (e.g. IGMP <-> MLDv2). • R5. Support both ASM and SSM. • R6: Current multicast operation procedures should be preserved. • R7: Content integrity must be preserved. • R8: Transition mechanism must not degrade QoSand customer’s QoE.

  3. Requirements • R9: Content should be sent only once in the network to preserve bandwidth. • R10: S4 -> R6 and S4 -> N6 -> R4 scenarios have higher priority to be addressed. • R11: If double-translation is used (ie. 4-6-4 or 6-4-6), the 2nd transition should translate the input multicast group address back to the original multicast group address.

  4. Questions?

More Related