1 / 16

Design Dimensioning and Tolerancing J. M. McCarthy Fall 2003

fathia
Download Presentation

Design Dimensioning and Tolerancing J. M. McCarthy Fall 2003

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Design Dimensioning and Tolerancing J. M. McCarthy Fall 2003 Overview of dimensions Dimensioning various features Limits of size Classes of fits Summary

    2. ANSI Y14.5-1994 Standard

    3. Purpose of an Engineering Drawing

    4. Dimensioning Guidelines

    5. Symbols Used in Dimensioning

    6. Layout of Dimensions

    7. Arrangement of Dimensions

    8. Dimensioning Holes

    9. Dimensioning the Radius of an Arc

    10. Drilled Holes, Counterbores and Countersinks

    11. Angles, Chamfers and Tapers

    12. Rounded Bars and Slots

    13. Limits of Size

    14. Fit Between Parts

    15. Classes of Fit

    16. Summary

More Related