1 / 12

GSM Cellular Standards: A look at the world’s most common digital cellular system

GSM Cellular Standards: A look at the world’s most common digital cellular system. Kevin Bolding Electrical Engineering Seattle Pacific University. GSM is the world’s most popular standard for cellular Digital, TDMA/WDMA. H. H. H. H. H. Base. GSM. Details on Voice data format, encoding

fathi
Download Presentation

GSM Cellular Standards: A look at the world’s most common digital cellular system

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. GSM Cellular Standards:A look at the world’s most common digital cellular system Kevin BoldingElectrical EngineeringSeattle Pacific University

  2. GSM is the world’s most popular standard for cellular Digital, TDMA/WDMA H H H H H Base GSM • Details on • Voice data format, encoding • Error-control coding • Channel sharing (TDM) • Channel allocation (FDM)

  3. Mobile Handset Voice Encoder Channel Encoder Modulator Noise Channel Base Station Channel Decoder Demodulator Wireless Channel Uplink Architecture

  4. Voice Encoder 260 bits Voice Coding • Analog signal is sampled using PCM at 64kbps. • The signal is broken into 20 ms samples, which contain 1280 bits each • A Regular Pulse Excited - Linear Predictive Coder (RPE-LPC) is used to compress the 1280 bits into 260 bits • Compression into just over 1/5 the size • 64kbps voice signal compressed into 13kbps signal • Each 260 bit sample contains 20ms of speech data IA – 50 bits IB – 132 bits II – 78 bits Most critical Very Important Icing

  5. Channel Encoder 456 bits Channel Coding - Blocks • The 260 bit (20ms) sample is divided into class IA, IB and II, based on how important the bits are in determining the sound quality. • IA uses a 3 bit CRC. If the CRC fails, the whole sample is thrown out One sample is 20ms of speech --> 456 bits --> 8 blocks • IA and IB together have a 4-bit trailer. Together, these are put into a ½-rate convolutional coder that doubles the number of bits One block is 2.5ms of speech --> 57 bits • II bits are appended unencoded, giving an overall sample of 456 bits IA – 50 IB – 132 bits IB – 132 bits II – 78 bits Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 • The 456 bit encoded sample is divided into 8 blocks of 57 bits each (each contains the equivalent of 2.5 ms of speech) – these are the basic units of transmission.

  6. Channel Encoder First sample (20ms) Second sample (20ms) IA – 50 IA – 50 IB – 132 bits IB – 132 bits IB – 132 bits IB – 132 bits II – 78 bits II – 78 bits 156.25 bits Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 Block - 57 TDMA Bursts • Blocks are gathered together to form a TDMA burst • 2 separate speech sample blocks are gathered together • Interleaved to protect against burst errors • 26-bit training sequence • To characterize multipath and filter it out • 16.25 tail/guard bits One burst is two blocks --> Two 2.5ms samples of speechfrom same source • Total Burst is 156.25 bits TG Block - 57 T G Training - 26 T G Block - 57 T/G

  7. Channel TG Block - 57 T G Training - 26 T G Block - 57 T/G TDMA Frame - 8 bursts - 8 x 2 x 2.5ms sample of speech - 1250 bits Sharing the channel – TDMA Frames • Eight bursts (from different sources) make up a TDMA frame One TDMA frame is eight bursts --> 8 sources x (2 x 2.5ms sample of speech) • This allows eight sources to share a channel Burst Burst Burst Burst Burst Burst Burst Burst Each burst comes from a different source (phone) Eight phones share a channel using TDM.

  8. Channel F F F F F F F F F F F F F F F F F F F F F F F TDMA MultiFrame - 26 Frames - 24 x 8 x 2 x 2.5ms sample of speech - 32500 bits - 120ms Burst Burst Burst Burst Burst Burst Burst Burst Sharing the channel • 8 Bursts per TDMA frame (2 x 2.5ms sample each) • 26 TDMA frames make up one Multi-frame • 24 are for data (speech) • 1 is for control , 1 is unused One TDMA MultiFrame is 26 Frames (24 data) --> 24 Frames x 8 Bursts/Frame x 2 Blocks/Burst = 384 Blocks per MultiFrame --> For each of the 8 senders, there are 384/8 = 48 Blocks per MultiFrame --> For each sender, 48 blocks = 120 ms of speech (60 ms from 2 samples) F F F Each TDMA MultiFrame takes 120ms to transmit and contains 120ms of speech data from 8 sources  8 times as efficient as analog transmission

  9. Modulator GSM: Modulation • Each Multiframe has 32500 bits and lasts 120ms • 270833 bps • Transmitted using a channel 200kHz wide • US: 890-915MHz band for cell uplink • Divided into 124 200kHz wide channels • Downlink from 935-960MHz • Cell towers arranged in a hexagonal grid, usually in groups of 7 – Requires 7 sets of independent channels • Each cell gets 124/7 = 17 channels • Cell capacity = 17 * 8 = 136 conversations

  10. Modulator GSM: Modulation • GSM uses Gaussian-filtered Minimum Shift Keying (GMSK). • MSK is a minimum-shift form of FSK • Gaussian pre-filter reduces bandwidth • MSK gives the best spectral efficiency of any digital bandpass signal set. • FSK only has one amplitude level, allowing for a simpler amplifier in the handset

  11. Discontinuous Transmission • Discontinuous transmission (DTX) allows for the transmitter to be turned off 60% of the time. • Saves power • Reduces the overall ambient noise in the cell sector. • DTX requires voice detection, so that the handset knows when to restart transmission. • DTX also requires a synch signal, so that the receiver can differentiate between silence and a dropped connection.

  12. Dynamic Power Compensation • The power between the handset and the tower can be dynamically adjusted in response to the channel BER. • This allows the channel to start at a minimum power level, and only increase when the signal requires a greater SNR. • For CDMA, Dynamic Power Compensation is a necessity • All transmit on same band at the same time • Power must be adjusted so that all signals are received at the same strength • Otherwise, one channel would overpower all others

More Related